Let's see your white third-gen's!
05-31-2006, 05:53 PM
#51
Okay, if I have to :-)
The link has lots, but I also pasted a couple >>
http://mohotcars.com/tta.html
Mike M
The link has lots, but I also pasted a couple >>
http://mohotcars.com/tta.html
Mike M
05-31-2006, 07:12 PM
#52
Supreme Member
Join Date: Mar 2000
Location: Kingman, AZ
Posts: 1,374
Likes: 0
Received 0 Likes
on
0 Posts
Nice car Mike!
Your car looks just like mine!
Nice to see you have some goodies to go with it!
I need to take some more of her.
I take it that's you buying up the stuff on ebay, huh?
There's a few of us who go hog wild on this stuff.
George
Your car looks just like mine!
Nice to see you have some goodies to go with it!
I need to take some more of her.
I take it that's you buying up the stuff on ebay, huh?
There's a few of us who go hog wild on this stuff.
George
Last edited by Mr. TurboTA; 02-27-2007 at 09:04 AM.
05-31-2006, 11:17 PM
#56
Member
Thread Starter
Join Date: Oct 2003
Location: Commerce MI
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Trans Am
Engine: 5L TPI
Transmission: 700R4
Heres mine. What do you guys think its worth?
I had an offer for 6k. Is that good or bad?
I had an offer for 6k. Is that good or bad?
06-01-2006, 12:06 AM
#57
Mr TTA, I did go on a bit of an eBay binge. The TTA required more effort though since you don't see really low mileage ones that often - I had to actually look for it. I liked your pictures! I wondered what that box of 6 glasses in my car was all about ...
Mike M
Mike M
06-01-2006, 04:58 AM
#58
Member
Join Date: Feb 2001
Location: Sewer City, Ia.
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 RS
Engine: 5.0
Transmission: Auto
Sure red, It has 121,000 mi, still runs and drives perfect, paint and top are in great shape, 18" IROCS(less than 200 miles on them), SS hood, K&N, 3" cat & exhaust, white guages, z28 grill, alpine cd,
pw, pl, pm, a/c, Interior is ok, carpet is worn over the tunnel, and 2 burn holes in the back seat.
I really have no idea what to ask for it.
pw, pl, pm, a/c, Interior is ok, carpet is worn over the tunnel, and 2 burn holes in the back seat.
I really have no idea what to ask for it.
Last edited by SeeYa; 06-01-2006 at 05:02 AM.
06-01-2006, 07:47 AM
#59
Supreme Member
Join Date: Mar 2000
Location: Kingman, AZ
Posts: 1,374
Likes: 0
Received 0 Likes
on
0 Posts
Mike,
Good score on those glasses!
I bought 2 boxes of them myself, when new.
I now have everyone trying to buy them from me now!
I just wish I had the pedal car. I just don't feel like spending $500 on one right now. Maybe someday though.
Now wait till you start collecting Indy stuff to go with the car! Ha!
George
Good score on those glasses!
I bought 2 boxes of them myself, when new.
I now have everyone trying to buy them from me now!
I just wish I had the pedal car. I just don't feel like spending $500 on one right now. Maybe someday though.
Now wait till you start collecting Indy stuff to go with the car! Ha!
George
06-01-2006, 09:39 PM
#61
Senior Member
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
Wow im suprised how many people posted about this, alot more than what i got when i posted 2 years ago about looking for white third gens(was deciding on what color i wanted) glad to see theres more white 3rdgens out there than i thought. heres my 85 Z-28
06-03-2006, 01:00 AM
#63
Member
Thread Starter
Join Date: Oct 2003
Location: Commerce MI
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Trans Am
Engine: 5L TPI
Transmission: 700R4
Sure red, It has 121,000 mi, still runs and drives perfect, paint and top are in great shape, 18" IROCS(less than 200 miles on them), SS hood, K&N, 3" cat & exhaust, white guages, z28 grill, alpine cd,
pw, pl, pm, a/c, Interior is ok, carpet is worn over the tunnel, and 2 burn holes in the back seat.
I really have no idea what to ask for it.
pw, pl, pm, a/c, Interior is ok, carpet is worn over the tunnel, and 2 burn holes in the back seat.
I really have no idea what to ask for it.
tummyson - awesome picture!
White just looks amazing at dawn/dusk
07-10-2006, 10:09 AM
#64
OK a family Friend just offered to paint my car for me at the end of the month at no cost......
so I'm trying to get a hold of a few more needed parts and some paint codes
what is the whitest white out there no A days and how can i get a hold of the paint codes???????
so I'm trying to get a hold of a few more needed parts and some paint codes
what is the whitest white out there no A days and how can i get a hold of the paint codes???????
07-10-2006, 03:33 PM
#67
Moderator
Originally Posted by tummyson
Heres my 89 with the factory stripe delete.
Thinking of painting it Cadillac Diamond White
Thinking of painting it Cadillac Diamond White
That is such a nice picture! Car looks awesome!
07-10-2006, 04:58 PM
#68
Senior Member
Join Date: Aug 2005
Location: Springfield, Oregon
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Z28, 88 GTA, 68 Cutlass S
Engine: 305TPI X2 ;), Chevy 250
Transmission: T5, 700R4, powerslide >:(
Axle/Gears: posi, and posi w/discs :D.
Originally Posted by mw66nova
woohoo fresh paint!
07-10-2006, 06:06 PM
#70
Member
Join Date: Jun 2005
Location: Topeka, Kansas
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Formula 350
Engine: L98 350 TPI
Transmission: 700-R4
I really didn't want to show her since she's in such bad shape, but what the hell and why not. Here's my '88 with my '94 behind it.
07-11-2006, 04:03 PM
#71
My 92 Heritage RS
Check out my car and tell me what you think, espically what you think of that bitchin' 350 in there!
Mods:
350 swap built from block up
Vortec Heads
Edelbrock Cast Headers
Flowmaster Exhaust
No Cats
No Emmissions system
Air Cleaner
GM Aluminum Intake
HP TBI off of police interceptor motor
Shift Kit
New Radio w/ 2amps, 2 10" subs, custom box, and all new alpine speakers
Mods:
350 swap built from block up
Vortec Heads
Edelbrock Cast Headers
Flowmaster Exhaust
No Cats
No Emmissions system
Air Cleaner
GM Aluminum Intake
HP TBI off of police interceptor motor
Shift Kit
New Radio w/ 2amps, 2 10" subs, custom box, and all new alpine speakers
Last edited by irishhockey34; 07-11-2006 at 04:10 PM.
07-11-2006, 04:26 PM
#72
Banned
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
My 87 GTA
And a RARE '84 all original (except tires),15k mile Roadster...
Even the engine belts and hoses are original, and in great shape!
And a RARE '84 all original (except tires),15k mile Roadster...
Even the engine belts and hoses are original, and in great shape!
07-12-2006, 04:08 AM
#77
Senior Member
Join Date: Aug 2005
Location: Springfield, Oregon
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Z28, 88 GTA, 68 Cutlass S
Engine: 305TPI X2 ;), Chevy 250
Transmission: T5, 700R4, powerslide >:(
Axle/Gears: posi, and posi w/discs :D.
Originally Posted by mw66nova
yeah, that is my second one of those hoods, though this one is a lift-off hood.
07-12-2006, 09:23 AM
#78
no pics as of right now, i'm currently in upstate new york and the car is in middle georgia. i'll have more pics of it soon. yeah, we cut out all the supports, it only weighs 15-20lbs. now. much lighter than my cowl hood, whic was in the 35-40lbs range. this one also started out as a crossifre injection hood with functional flaps, but the supports on the underside where cracking which is how i justified turning itn a lift off. the carb is sealed completely to the hood via an air pan, and if you look the openings in the hood are taped off, well, the tape is ontop of filter elements that i made backets for, the just slide in and out of the openings.
Last edited by mw66nova; 07-12-2006 at 09:28 AM.
07-13-2006, 03:18 AM
#79
Senior Member
Join Date: Aug 2005
Location: Springfield, Oregon
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Z28, 88 GTA, 68 Cutlass S
Engine: 305TPI X2 ;), Chevy 250
Transmission: T5, 700R4, powerslide >:(
Axle/Gears: posi, and posi w/discs :D.
Originally Posted by mw66nova
no pics as of right now, i'm currently in upstate new york and the car is in middle georgia. i'll have more pics of it soon. yeah, we cut out all the supports, it only weighs 15-20lbs. now. much lighter than my cowl hood, whic was in the 35-40lbs range. this one also started out as a crossifre injection hood with functional flaps, but the supports on the underside where cracking which is how i justified turning itn a lift off. the carb is sealed completely to the hood via an air pan, and if you look the openings in the hood are taped off, well, the tape is ontop of filter elements that i made backets for, the just slide in and out of the openings.
07-13-2006, 09:08 AM
#80
it is some sort of fiberglass/resin composite...by the time it was all said and done, two people have no issues whatsoever liftin' that thing off the car...i need to put some lightweight supports that run the width of the hood cause it's super filmsy right now.
07-13-2006, 03:34 PM
#81
Senior Member
Join Date: Aug 2005
Location: Springfield, Oregon
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Z28, 88 GTA, 68 Cutlass S
Engine: 305TPI X2 ;), Chevy 250
Transmission: T5, 700R4, powerslide >:(
Axle/Gears: posi, and posi w/discs :D.
yeah i can understand it bein super flimsy.
07-15-2006, 01:19 PM
#90
Supreme Member
Join Date: Jan 2001
Location: St Catharines, ON
Posts: 2,412
Likes: 0
Received 0 Likes
on
0 Posts
Car: '85 Z28
Engine: 350
Transmission: T5
Axle/Gears: 3.23
Originally Posted by coolmarocrzy
here is my all original 85Z. only 21k
07-15-2006, 03:15 PM
#92
Member
iTrader: (2)
Join Date: Apr 2005
Location: East Moline, IL
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Z28
Engine: LS
Transmission: T56
Axle/Gears: 9inch/3.50 gears
Originally Posted by 85_ZED28
Awesome!! Thats exactly what my car looked like new. Do you have any high res. pics?
TinyPic Video and Image Hosting
TinyPic Video and Image Hosting
TinyPic Video and Image Hosting
07-16-2006, 05:05 PM
#94
Senior Member
Join Date: Aug 2005
Location: Springfield, Oregon
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Z28, 88 GTA, 68 Cutlass S
Engine: 305TPI X2 ;), Chevy 250
Transmission: T5, 700R4, powerslide >:(
Axle/Gears: posi, and posi w/discs :D.
Originally Posted by Dyno Don
Mine (thanks to CarCraft):
07-19-2006, 11:00 PM
#99
Member
Thread Starter
Join Date: Oct 2003
Location: Commerce MI
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Trans Am
Engine: 5L TPI
Transmission: 700R4
One more pix of mine:
----------
I also think this is a cool shot, from above (thanks Saigon_Bob)
----------
I also think this is a cool shot, from above (thanks Saigon_Bob)
Last edited by Red90IROC; 07-19-2006 at 11:05 PM. Reason: Automerged Doublepost
