Door rods
#1
Door rods
Need a lil bit of help.
Can anyone point me in the right direction?
Driver side outer handle has gotten very sloppy. I believe the push nuts / speed nuts were the wrong size to begin with, so I will be tackling that next week.
Also, the key lock has quit working.
I need pics or direction to schematics of the correct door rod orientations for Driver side. Locks worked 1 time, that's all! Key is hard to turn, so I don't want to force it.This is another issue that I have let slide for 8 yrs!
Any / All help MUCH appreciated!!
Doors are MANUAL LOCKS, not electric if that makes a difference?
Can anyone point me in the right direction?
Driver side outer handle has gotten very sloppy. I believe the push nuts / speed nuts were the wrong size to begin with, so I will be tackling that next week.
Also, the key lock has quit working.
I need pics or direction to schematics of the correct door rod orientations for Driver side. Locks worked 1 time, that's all! Key is hard to turn, so I don't want to force it.This is another issue that I have let slide for 8 yrs!
Any / All help MUCH appreciated!!
Doors are MANUAL LOCKS, not electric if that makes a difference?
#6
Senior Member
iTrader: (1)
Join Date: Jun 2014
Location: Southeast VA
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro RS T-Top
Engine: 5.0 Tbi
Transmission: 700r4
Axle/Gears: 3.42
Re: Door rods
My handle has gotten real loose as well, but looking at it close it's from the pivot point wallowing out on the handle pivot, not much to do besides replace the assembly for mine. Hope that's not the case for you.
#7
Re: Door rods
Me too. These are the originals, and when it went back together after paint, I did
not notice anything....but I needed it done by a certain date so not too much attention paid.
Honestly hoping a rod popped out and nothing more than new nuts for the handle.
Friend recommends new keys // locks when I take it apart.
not notice anything....but I needed it done by a certain date so not too much attention paid.
Honestly hoping a rod popped out and nothing more than new nuts for the handle.
Friend recommends new keys // locks when I take it apart.
Trending Topics
#8
Senior Member
iTrader: (1)
Join Date: Jun 2014
Location: Southeast VA
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro RS T-Top
Engine: 5.0 Tbi
Transmission: 700r4
Axle/Gears: 3.42
Re: Door rods
I guess you could. But that would require taking the other door apart as well as the hatch key lock.
#9
Re: Door rods
Very true!
Sometimes a day off goes too fast! It will be about 8 days before I get a day off, this ranks in #3 priority of 5 to do items, so chances are good I will have a half day to get it apart, look things over good, hopefully fixed & back together!
Sometimes a day off goes too fast! It will be about 8 days before I get a day off, this ranks in #3 priority of 5 to do items, so chances are good I will have a half day to get it apart, look things over good, hopefully fixed & back together!
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
1Aauto
Sponsored Vendors
1
01-15-2016 06:26 AM
1Aauto
Sponsored Vendors
0
09-02-2015 01:35 PM