Front license plate bracket - 84 Bird
#1
Member
Thread Starter
iTrader: (1)
Join Date: Dec 2014
Location: Chisago city mn
Posts: 144
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 firebird se
Engine: 305
Transmission: 700r4
Axle/Gears: 373
Front license plate bracket - 84 Bird
Attached are pictures of the front of the Bird - Can someone send me a picture of what and how the license plate bracket attaches - as well as which bracket it should be. I have a plastic plate holder that fits the V of the nose - however, not sure if it is correct or not? thx byron
#2
Member
iTrader: (1)
Join Date: Apr 2010
Location: Montana
Posts: 405
Likes: 0
Received 4 Likes
on
4 Posts
Car: '84 Firebird TA & '87 Camaro LT
Engine: 350 V-8 & V-6
Transmission: 700R4
Axle/Gears: 3.23 & 3.42
Re: Front license plate bracket - 84 Bird
Here are the original brackets: http://moderndaymuscle.com/inc/sdetail/199/956
Here is the mounting plate: http://www.classicindustries.com/pro...ts/152929.html You need both.
This is what I put on mine, looks much better whether hidden for a show or up and exposed: http://www.classicindustries.com/pro...arts/a400.html
Here is the mounting plate: http://www.classicindustries.com/pro...ts/152929.html You need both.
This is what I put on mine, looks much better whether hidden for a show or up and exposed: http://www.classicindustries.com/pro...arts/a400.html
#4
Supreme Member
Join Date: Apr 2006
Location: Northern, CA
Posts: 4,482
Likes: 0
Received 8 Likes
on
8 Posts
Car: 1989 Iroc-Z Camaro
Engine: TBI,5.0
Transmission: Automatic 700R4
Axle/Gears: Eaton Posi,3.42,LPW Ultimate Cover
Re: Front license plate bracket - 84 Bird
As long as you do not have to drill into that front cover your good to go.
I used brackets that came from around the red bowtie insert for my plate on my Camaro.
You could have the brackets come from around the bottom of the cover for yours.
Cops made me put a plate over my $100.00 red bowtie insert.
I used brackets that came from around the red bowtie insert for my plate on my Camaro.
You could have the brackets come from around the bottom of the cover for yours.
Cops made me put a plate over my $100.00 red bowtie insert.
Last edited by Ron U.S.M.C.; 11-18-2016 at 11:00 PM.
#5
Supreme Member
Join Date: Apr 2010
Location: Modesto, California
Posts: 1,015
Likes: 0
Received 5 Likes
on
4 Posts
Car: 88 Firebird Formula
Engine: LO5 5.7 TBI/Ebl Flash
Transmission: 700R4
Axle/Gears: 2.73 stock rear end
Re: Front license plate bracket - 84 Bird
I can send pictures in the morning of my 88 firebird.
P.s What bumper inserts (or what ever they are called) are those? I love how they are grilled!
P.s What bumper inserts (or what ever they are called) are those? I love how they are grilled!
Trending Topics
#8
Member
Thread Starter
iTrader: (1)
Join Date: Dec 2014
Location: Chisago city mn
Posts: 144
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 firebird se
Engine: 305
Transmission: 700r4
Axle/Gears: 373
Re: Front license plate bracket - 84 Bird
Thanks for the responses from everyone. Ghettobird52 - the grills were ordered off the net a couple of years ago. Unfortunately I have to recall of what or whom? Mantaguy - I will pm you about your brackets. Thx again to all - Byron
#9
Member
iTrader: (1)
Join Date: Apr 2010
Location: Montana
Posts: 405
Likes: 0
Received 4 Likes
on
4 Posts
Car: '84 Firebird TA & '87 Camaro LT
Engine: 350 V-8 & V-6
Transmission: 700R4
Axle/Gears: 3.23 & 3.42
Re: Front license plate bracket - 84 Bird
Ghettobird: This may be what you are looking for: http://www.hawksmotorsports.com/gril...oduction-pair/
Camaro inserts won't fit on a Firebird front clip
Camaro inserts won't fit on a Firebird front clip