1982 Camaro Berlinetta (modified)
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jun 2010
Location: San Antonio, TX
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Camaro Berlinetta
Engine: GM crate motor Goodwrench 5.7 350
Transmission: 700R4
Axle/Gears: 3.23
1982 Camaro Berlinetta (modified)
Putting out feelers to see if there is much interest and what is offered.
Situation is a little unique but I will try to make it as uncomplicated as possible.
Vehicle has been in storage in San Antonio, Texas for just over 5 years. I am active duty military, stationed far away from the vehicle and unable to get current photos.
I wish I had the time/ money to collect the vehicle from storage and fix it up, but life has other plans and it is time to let someone put more care into it.
2nd owner, owned for 16 years and was a daily driver for 11 years.
Body and majority of paint is stock Silver, interior is maroon/ burgundy, stock except black racing seats in front.
Body/ frame has roughly 350k miles.
Has rear louvers and t tops.
Modifications are as follows:
Rochester quad carb has been rebuilt multiple times.
Stock 305 was swapped out for a GM Goodwrench 350 crate in 2011-12 timeframe, new motor has maybe 100k miles.
Modified sequential taillights around 2012.
Stock TH-200c replaced with a 700r4 with a ratchet shifter around 2015.
Converted from a v belt to serpentine system in 2017.
Exhaust is dyno don shortys and a hooker aerochamber cat back installed in 2017.
various other modifications along the years but I think I covered most of the major ones.
I know the vehicle is far from pristine, but would be a decent project car. I gave it as much love as I could with the limited budget.
Vehicle was running when I loaded it on the trailer but I cannot attest to that anymore.
I am looking for photos taken just before putting it into storage and will post when I can.
If there is any interest, please reach out.
Edit 31JAN24
Photos added
a few more upgrades I forgot:
Morimoto HID projector headlights
A-pillar gauges
Western Cyclone II wheels, I may have the stock ones available too but will have to look around.
Situation is a little unique but I will try to make it as uncomplicated as possible.
Vehicle has been in storage in San Antonio, Texas for just over 5 years. I am active duty military, stationed far away from the vehicle and unable to get current photos.
I wish I had the time/ money to collect the vehicle from storage and fix it up, but life has other plans and it is time to let someone put more care into it.
2nd owner, owned for 16 years and was a daily driver for 11 years.
Body and majority of paint is stock Silver, interior is maroon/ burgundy, stock except black racing seats in front.
Body/ frame has roughly 350k miles.
Has rear louvers and t tops.
Modifications are as follows:
Rochester quad carb has been rebuilt multiple times.
Stock 305 was swapped out for a GM Goodwrench 350 crate in 2011-12 timeframe, new motor has maybe 100k miles.
Modified sequential taillights around 2012.
Stock TH-200c replaced with a 700r4 with a ratchet shifter around 2015.
Converted from a v belt to serpentine system in 2017.
Exhaust is dyno don shortys and a hooker aerochamber cat back installed in 2017.
various other modifications along the years but I think I covered most of the major ones.
I know the vehicle is far from pristine, but would be a decent project car. I gave it as much love as I could with the limited budget.
Vehicle was running when I loaded it on the trailer but I cannot attest to that anymore.
I am looking for photos taken just before putting it into storage and will post when I can.
If there is any interest, please reach out.
Edit 31JAN24
Photos added
a few more upgrades I forgot:
Morimoto HID projector headlights
A-pillar gauges
Western Cyclone II wheels, I may have the stock ones available too but will have to look around.
Last edited by Dabesiv; 01-30-2024 at 11:09 PM.
#6
#7
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jun 2010
Location: San Antonio, TX
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Camaro Berlinetta
Engine: GM crate motor Goodwrench 5.7 350
Transmission: 700R4
Axle/Gears: 3.23
Re: 1982 Camaro Berlinetta (modified)
Morimoto HID Upgrade
Serpentine system
Before the header install
I apologize for not so great photos. I didn't intend to sell her and didn't take some beauty shots, but moving overseas and deployments had me so busy and I never got the time to go back. I am stationed on the East coast now, but still don't really have the time available to get more.
I forgot to add a few updates but edited original post to reflect them.
I didn't include a price as I was worried I wouldn't price it well.
I'd like around $8k, but will entertain offers and maybe we can work something out.
The body is is fair shape minus the paint, but not bad for 42 years old, the bones are good though and very little to no rust last I saw it.
Happy to answer any questions I can, either in messages or replies to this post.
Last edited by Dabesiv; 02-08-2024 at 06:09 PM.
Trending Topics
#8
Junior Member
Join Date: May 2004
Location: Schenectady, NY
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 RS 98 SS 92 TY 09 CTS4 03 Yukon
Engine: L03 soon to be LQ4
Transmission: 700R4 soon to be 4L60E
Re: 1982 Camaro Berlinetta (modified)
Still have it? Standard guages or digital? Power windows?
#10
Supreme Member
iTrader: (8)
Re: 1982 Camaro Berlinetta (modified)
I am interested. Feel free to text me at 512 947-5537 or email me at topduarte@yahoo.com
Thanks
Manny
Thanks
Manny
Thread
Thread Starter
Forum
Replies
Last Post