Is this a carburetor wiring harness ?
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Aug 2006
Location: LONG ISLAND, NY
Posts: 548
Likes: 0
Received 11 Likes
on
10 Posts
Car: 1991 camaro rs convertible
Engine: Built ls1
Transmission: T56
Axle/Gears: 3:42
Is this a carburetor wiring harness ?
I have recently acquired a 90 camaro tbi auto along with boxes of parts. The only harness that came with the car was this harness
It isn’t the proper connector for the body side of the c100 and I know it’s not the tbi harness. Only thing I can think of is that it’s a carb harness. Any insight would be awesome.
It isn’t the proper connector for the body side of the c100 and I know it’s not the tbi harness. Only thing I can think of is that it’s a carb harness. Any insight would be awesome.
#2
Member
Re: Is this a carburetor wiring harness ?
That is a partial body wiring harness, mostly front clip. As you can see it has the signal bulbs integrated into it and three relays, most likely for lighting. You may find that the car had front end damage and that the original harness was damaged, but that is a wild a$$ guess on my part.
#3
Supreme Member
Join Date: Feb 2005
Location: Hawaii
Posts: 2,292
Received 157 Likes
on
146 Posts
Car: 89' Firebird
Engine: 3.4L V-6
Transmission: 700-R4
Axle/Gears: Whatever came stock!
Re: Is this a carburetor wiring harness ?
Little hard to see but I can see what looks like a single pin O2 sensor pigtail and I think the rainbow wiring goes over the motor and into the passenger side by the door?
the rectangle plastic thing goes on the driver side rail and houses mainly body / cruise control wires
the rectangle plastic thing goes on the driver side rail and houses mainly body / cruise control wires
#4
Senior Member
Thread Starter
iTrader: (2)
Join Date: Aug 2006
Location: LONG ISLAND, NY
Posts: 548
Likes: 0
Received 11 Likes
on
10 Posts
Car: 1991 camaro rs convertible
Engine: Built ls1
Transmission: T56
Axle/Gears: 3:42
Re: Is this a carburetor wiring harness ?
Yeah i don’t know exactly what year its from but its definitely a body harness with some other connectors on it.
#5
Supreme Member
Join Date: Feb 2005
Location: Hawaii
Posts: 2,292
Received 157 Likes
on
146 Posts
Car: 89' Firebird
Engine: 3.4L V-6
Transmission: 700-R4
Axle/Gears: Whatever came stock!
Re: Is this a carburetor wiring harness ?
Do the relays have a part number?
Try reverse search the part numbers and you can see what year they work on...
those relays don;t look like anything at last that ive seen 87 and up. I think 89 used rounder rela ys and at least i know 87 has more rectangular shaped relays.
That bracket doesn;t look like an 87 up bracket as well....so if anything maybe its 82 *- 84?
Try reverse search the part numbers and you can see what year they work on...
those relays don;t look like anything at last that ive seen 87 and up. I think 89 used rounder rela ys and at least i know 87 has more rectangular shaped relays.
That bracket doesn;t look like an 87 up bracket as well....so if anything maybe its 82 *- 84?
#6
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,123
Received 1,688 Likes
on
1,283 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Is this a carburetor wiring harness ?
Can't tell you what year it is myself. But I see Firebird headlight motor relays, connectors for single (not dual) headlights, parking light & side marker light bulb sockets (some with the bulbs still in them), the fender side of C100, horn connector, and 1 or 2 other things that I'm not sure of. The part that somebody put that red split-loom on is the pass side headlight etc. Unmistakably Firebird.
Doesn't fit your Camaro no matter what year either it or your car is.
Relays are relays are relays are relays are relays. The same part # relays tended to be used ALL OVER the car where one was needed, for all applications; the only difference being, some had the 5th contact (normally closed), and some didn't. I doubt the part # will help identify anything. Those are the earlier style though; they went to the oval can type with sealed connectors, in maybe 89 or so, like karr said. So it's probably from 88-back or whatever exact year that change was.
Doesn't fit your Camaro no matter what year either it or your car is.
Relays are relays are relays are relays are relays. The same part # relays tended to be used ALL OVER the car where one was needed, for all applications; the only difference being, some had the 5th contact (normally closed), and some didn't. I doubt the part # will help identify anything. Those are the earlier style though; they went to the oval can type with sealed connectors, in maybe 89 or so, like karr said. So it's probably from 88-back or whatever exact year that change was.
Thread
Thread Starter
Forum
Replies
Last Post
noahTHEpurdy
Engine/Drivetrain/Suspension Wanted
4
01-24-2007 10:54 AM