03-11-2010, 11:59 AM
|
#3 |
| Supreme Member
Join Date: Sep 2005 Location: St Charles, MO
Posts: 5,454
Car: 1991 Z28 convertible built 3/1/1990 Engine: Cammed 6.0L LSX Transmission: T56 Axle/Gears: custom Ford 8.8", 4.10 gears | Re: 1990 camaro enterior lights not working when door opens
Make sure the switch in the door jam is actually pushing in and out like it is supposed to. I know my wife had the same problem with her IROC-Z, except the lights would come on when the passenger door was opened, but not the driver side door. The reason was that the switch in the driver side door jam was getting stuck and wouldn't push out when the door was opened.
__________________ 2nd Place Modified Camaro - ThirdGen Fest '11 LSX / T56 combo, 420rwhp 407 ft./lbs. custom Ford 8.8" with 9" axle tubes, 4.10's and Ford Racing Cobra diff, Moser axles, LS1 brake swap front and rear, Hawks 1 3/4" longtubes, forged internals, TSP MS4, LS6 intake, Spohn LCA's/torque arm/cross member/k member/subframe connectors, Alston subframe connectors, Hotchkis springs, poly motor/trans mounts & sway bar bushings/end links, Memphis Audio / Pioneer audio system, etc etc et   |
 
|  |
please help if you can no power going to the door switch when the door opens and the rear view mirror light doesnt light up .The power is going to the rear view mirror to turn on with the headlight switch but it dont light up when the door opens like it shoud fuses are good and when i put a test light to the tan wire no power or the white no power Help .This is a convertible any idead im stumped 
