Need some help
#1
Member
Thread Starter
iTrader: (6)
Join Date: May 2003
Location: Utah
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Car: 00' rcsb
Engine: Little boosted 5.3
Transmission: 4l80e
Need some help
I am swaping the underhood harness from one 92 camaro to another. I want to do this with taking as little out of the car as possible. i have got it from the passenger side all the way out till the driver side. but when I get to the point where it goes back into the firewall on the drivers side i have some questions.
Is there any way that i can disconnect the whole harness before it goes under the dash or do i have to remove the whole harness from under the dash too. if i do have to removen it from the dash what all do i need to remove to make it as painless as possible.
thanks
Colt
Is there any way that i can disconnect the whole harness before it goes under the dash or do i have to remove the whole harness from under the dash too. if i do have to removen it from the dash what all do i need to remove to make it as painless as possible.
thanks
Colt
Last edited by 1983sc; 06-05-2007 at 12:50 PM.