Universal Seqqential Turn Signals - Round 3
03-19-2008, 12:13 AM
#102
Supreme Member
iTrader: (2)
Join Date: Nov 2006
Location: Connecticut
Posts: 1,698
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro, 1986 Trans AM
Engine: V6 2.8 multi-port and V8 5.0 FI
Transmission: 5-Speed and Automatic
Axle/Gears: no idea
Re: Sequential Turn Signals - Round 3
is there a type of relay i can buy at radioshack or somewhere that i can wire into my 86 trans am? there must be
03-19-2008, 12:21 AM
#104
Supreme Member
iTrader: (2)
Join Date: Nov 2006
Location: Connecticut
Posts: 1,698
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro, 1986 Trans AM
Engine: V6 2.8 multi-port and V8 5.0 FI
Transmission: 5-Speed and Automatic
Axle/Gears: no idea
Re: Sequential Turn Signals - Round 3
sorry i just assumed it was some kind of relay that made the turn signals sequential.
i have no problem going out n buying the parts just curious what parts to make it happen.
i have no problem going out n buying the parts just curious what parts to make it happen.
03-19-2008, 12:25 AM
#105
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Universal Seqqential Turn Signals - Round 3
No. The STS unit is a microprocessor controlled, circuit board, custom built unit.
A relay basically amounts to a remote mounted electrical "trigger" for higher voltages, so they don't lose voltage through lengthy wiring.
Here is a pic of it with the install instructions.
https://www.thirdgen.org/forums/atta...s-p1010010.jpg
A relay basically amounts to a remote mounted electrical "trigger" for higher voltages, so they don't lose voltage through lengthy wiring.
Here is a pic of it with the install instructions.
https://www.thirdgen.org/forums/atta...s-p1010010.jpg
Last edited by Stephen; 03-19-2008 at 12:30 AM.
03-19-2008, 12:37 AM
#106
Supreme Member
iTrader: (2)
Join Date: Nov 2006
Location: Connecticut
Posts: 1,698
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro, 1986 Trans AM
Engine: V6 2.8 multi-port and V8 5.0 FI
Transmission: 5-Speed and Automatic
Axle/Gears: no idea
Re: Universal Seqqential Turn Signals - Round 3
does one unit work for both left and right taillights?
if you can e-mail me at robertmaxbarbieri@yahoo.com we can discuss this further in greater detail.
thanks
if you can e-mail me at robertmaxbarbieri@yahoo.com we can discuss this further in greater detail.
thanks
03-19-2008, 12:39 AM
#107
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Universal Seqqential Turn Signals - Round 3
Yes. 1 unit controls both sides.
03-19-2008, 02:19 AM
#108
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Universal Seqqential Turn Signals - Round 3
OK.....
I'm down to 5 units, and don't want M.O. coming in, but have Paypal payments come in first, then not have a unit to ship out for a M.O. payment.
That being said.....NO MORE M.O. PAYMENTS
If you have a M.O. in the mail, please PM me so. I keep getting "I'll sens a M.O. tomorrow, but a week later,,,2 weeks later, no M.O. shows, and that person doesn't respond to PMs, since I'm trying to find out that if they DID, the M.O. got lost in the mail, but as far as I can tell, that has never happened. No "I sent one in." but it never arrived.
I'm down to 5 units, and don't want M.O. coming in, but have Paypal payments come in first, then not have a unit to ship out for a M.O. payment.
That being said.....NO MORE M.O. PAYMENTS
If you have a M.O. in the mail, please PM me so. I keep getting "I'll sens a M.O. tomorrow, but a week later,,,2 weeks later, no M.O. shows, and that person doesn't respond to PMs, since I'm trying to find out that if they DID, the M.O. got lost in the mail, but as far as I can tell, that has never happened. No "I sent one in." but it never arrived.
03-19-2008, 02:40 AM
#109
Member
Join Date: May 2005
Location: California
Posts: 238
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Z28 Camaro
Engine: 5.7L V8
Transmission: auto
Re: Universal Seqqential Turn Signals - Round 3
Just stumbled across this thread, so let me get this straight...
I have a 91 Camaro so 1) I paint the amber turn signal red, 2) I change the wiring as per the article in the link, 3) buy and install the kit and I have sequential tail lights like the Murcury Cougars of the 1970's? COOL!
I have a 91 Camaro so 1) I paint the amber turn signal red, 2) I change the wiring as per the article in the link, 3) buy and install the kit and I have sequential tail lights like the Murcury Cougars of the 1970's? COOL!
03-19-2008, 02:49 AM
#110
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Universal Seqqential Turn Signals - Round 3
Just stumbled across this thread, so let me get this straight...
I have a 91 Camaro so 1) I paint the amber turn signal red, 2) I change the wiring as per the article in the link, 3) buy and install the kit and I have sequential tail lights like the Murcury Cougars of the 1970's? COOL!
I have a 91 Camaro so 1) I paint the amber turn signal red, 2) I change the wiring as per the article in the link, 3) buy and install the kit and I have sequential tail lights like the Murcury Cougars of the 1970's? COOL!
Although at this time, NO orders will be accepted this week. I don't wanna take Paypal payments, then have M.O.s show up in the mail, but have nothing to ship.
These are not simply bought at wholesale, then me reselling them. They are a custom designed circuit board, then hand assembled/soldered, one by one.
Not even certain if a Round 4 would happen, short of 20 pre-pays....the circuit boards are built in batches of 20.
03-19-2008, 05:29 PM
#113
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Universal Seqqential Turn Signals - Round 3
I'll give the M.O.s a week to arrive. That should be enough time, as the last one I was told was on it's way, but late last week
No show? And I'll take Paypals. Wouldn't be first M.O. that never showed.
No show? And I'll take Paypals. Wouldn't be first M.O. that never showed.
03-24-2008, 12:33 PM
#114
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Universal Seqqential Turn Signals - Round 3
Last Wed. I said a week, but ZERO PMs have arrived, and only 1 M.O. (came in Sat.).
So...Anybody wanna Paypal, I've got 3 left...
Paypal $50, including shipping, to SteveCranford@Austin.rr.com
Payments received bu 4:30pm today, will ship today.
I'll update this page as payments come in.
Credit Card funded Paypal payments will only be accepted, due the high transaction cost, for the extra $5 fee. For $55, I will accept Credit Card funded transactions.
So...Anybody wanna Paypal, I've got 3 left...
Paypal $50, including shipping, to SteveCranford@Austin.rr.com
Payments received bu 4:30pm today, will ship today.
I'll update this page as payments come in.
Credit Card funded Paypal payments will only be accepted, due the high transaction cost, for the extra $5 fee. For $55, I will accept Credit Card funded transactions.
Last edited by Stephen; 03-24-2008 at 04:42 PM.
03-25-2008, 12:19 PM
#115
Senior Member
Join Date: Oct 2007
Posts: 641
Likes: 0
Received 1 Like
on
1 Post
Car: 91 RS
Engine: 350 TPI
Transmission: T5
Axle/Gears: 3.45
Re: Universal Seqqential Turn Signals - Round 3
Last Wed. I said a week, but ZERO PMs have arrived, and only 1 M.O. (came in Sat.).
So...Anybody wanna Paypal, I've got 3 left...
Paypal $50, including shipping, to SteveCranford@Austin.rr.com
Payments received bu 4:30pm today, will ship today.
I'll update this page as payments come in.
Credit Card funded Paypal payments will only be accepted, due the high transaction cost, for the extra $5 fee. For $55, I will accept Credit Card funded transactions.
So...Anybody wanna Paypal, I've got 3 left...
Paypal $50, including shipping, to SteveCranford@Austin.rr.com
Payments received bu 4:30pm today, will ship today.
I'll update this page as payments come in.
Credit Card funded Paypal payments will only be accepted, due the high transaction cost, for the extra $5 fee. For $55, I will accept Credit Card funded transactions.
03-25-2008, 12:23 PM
#116
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Universal Seqqential Turn Signals - Round 3
can i just wire you 50 bucks? ill sned you the money today if i can get off work! so when you hit the brakes, do these flash once and then stay red? or do they keep flashing over and over as you have the brake pedal pressed in? thanks for the info and let me kno! how you want this money received. let me know i have money to throw 24/7 so i wont BS you. late.
Only 3 left, so Paypal only now.
03-27-2008, 09:58 AM
#117
03-30-2008, 10:25 AM
#120
Supreme Member
iTrader: (3)
Join Date: Jul 2004
Posts: 2,989
Likes: 0
Received 5 Likes
on
4 Posts
Car: '91 Z28 convertible
Engine: TPI
Transmission: T5
Axle/Gears: 3.27 posi disc
Re: Universal Seqqential Turn Signals - Round 3
SamYouAre 
just want to make sure that you realize that this is for tail lights with multiple red bulbs per side. Our Camaros are not set up for this from factory, you'll have to modify your tail lights and wiring.
I wouldn't want you to spend $50 on the unit and then find out later that it won't work for your car.
But if you are planning on modifying the tail lights and wiring, you'd be the first person with an STS on a Camaro and I want to see pictures and video!!
Lou
just want to make sure that you realize that this is for tail lights with multiple red bulbs per side. Our Camaros are not set up for this from factory, you'll have to modify your tail lights and wiring.
I wouldn't want you to spend $50 on the unit and then find out later that it won't work for your car.
But if you are planning on modifying the tail lights and wiring, you'd be the first person with an STS on a Camaro and I want to see pictures and video!!
Lou
03-30-2008, 10:43 AM
#121
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Universal Seqqential Turn Signals - Round 3
Well.....I've had a couple of others say they were doing the amber to red conversion, and sold the STS units to Camaro owners, but have yet to see videos of a Camaro with STS. Lots of triple red Camaro tail light conversions, but no videos of a triple red Camaro with STS.
03-30-2008, 10:52 AM
#122
Supreme Member
iTrader: (3)
Join Date: Jul 2004
Posts: 2,989
Likes: 0
Received 5 Likes
on
4 Posts
Car: '91 Z28 convertible
Engine: TPI
Transmission: T5
Axle/Gears: 3.27 posi disc
Re: Universal Seqqential Turn Signals - Round 3
Heck, I might even do it one day.
I sure want to do the amber-to-red conversion but am still not convinced I want STS. But if you bug me enough, I might do it.
Lou
I sure want to do the amber-to-red conversion but am still not convinced I want STS. But if you bug me enough, I might do it.
Lou
03-30-2008, 04:38 PM
#125
Senior Member
Join Date: Oct 2007
Posts: 641
Likes: 0
Received 1 Like
on
1 Post
Car: 91 RS
Engine: 350 TPI
Transmission: T5
Axle/Gears: 3.45
Re: Universal Seqqential Turn Signals - Round 3
SamYouAre
just want to make sure that you realize that this is for tail lights with multiple red bulbs per side. Our Camaros are not set up for this from factory, you'll have to modify your tail lights and wiring.
I wouldn't want you to spend $50 on the unit and then find out later that it won't work for your car.
But if you are planning on modifying the tail lights and wiring, you'd be the first person with an STS on a Camaro and I want to see pictures and video!!
Lou
just want to make sure that you realize that this is for tail lights with multiple red bulbs per side. Our Camaros are not set up for this from factory, you'll have to modify your tail lights and wiring.
I wouldn't want you to spend $50 on the unit and then find out later that it won't work for your car.
But if you are planning on modifying the tail lights and wiring, you'd be the first person with an STS on a Camaro and I want to see pictures and video!!
Lou
03-30-2008, 04:50 PM
#126
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Universal Seqqential Turn Signals - Round 3
91/92 Firebird instructions are included, and the 91/92 'birds were switched over to the Camaro style wiring, for the separate tail & brake wires, since the 4th gens were fixing to come out.
I gave 2 left, but only 1 of them is ready to ship right now. Gotta finish the last one. Moving & unpacking has kept me busy. Besides, the last few orders have been SLOW coming in.
----------
Kevin,
Yours is packed & ready to ship tomorrow!
I gave 2 left, but only 1 of them is ready to ship right now. Gotta finish the last one. Moving & unpacking has kept me busy. Besides, the last few orders have been SLOW coming in.
----------
Kevin,
Yours is packed & ready to ship tomorrow!
Last edited by Stephen; 03-30-2008 at 04:52 PM. Reason: Automerged Doublepost
04-09-2008, 08:44 AM
#129
Junior Member
iTrader: (2)
Join Date: Oct 2006
Location: Jefferson, GA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Re: Universal Seqqential Turn Signals - Round 3
Hey Stephen, are these gone? Please say there is one left, ready to send paypal now, lol. I'm dying to hook this up!
04-09-2008, 01:29 PM
#130
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Universal Seqqential Turn Signals - Round 3
By Paypal deposited funds only, not credit credit or debit card funded. If funded by cards, add $5 to cover the Paypal transaction fee they charge, for $55 total. That includes shipping in the 48 states
Paypal to SteveCranford@Austin.rr.com
Last edited by Stephen; 04-09-2008 at 02:30 PM.
04-10-2008, 12:29 AM
#131
Junior Member
Join Date: Aug 2007
Location: Gulfport, Florida
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Car: Toyota Slowica
Engine: 2.2 liters of raw muscle
Transmission: 5 speed stick
Re: Universal Seqqential Turn Signals - Round 3
wow... I just got around to checking this thread again, been busy with work, trying to afford lawyers, ect... if you still have it in two weeks I'm in. all my cash before then is going to a project firebird, and gas.
04-10-2008, 12:52 AM
#132
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Universal Seqqential Turn Signals - Round 3
I'll post when the last one sells. No current plans for another batch, except for a vendor possibly picking them to sell retail.
04-10-2008, 04:37 PM
#133
Senior Member
Join Date: Sep 2007
Location: Chicagoland Area
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 GTA/'86 TA/98 TA
Engine: 350/350/LS1
Transmission: R4/T5/4L60E
Axle/Gears: 3.23/2.77/3.73
Re: Universal Seqqential Turn Signals - Round 3
I installed the unit on Sunday night. I will get a video soon if it ever stops raining
04-11-2008, 03:38 PM
#134
Senior Member
iTrader: (1)
Join Date: Apr 2007
Location: Palm Coast, FL
Posts: 668
Likes: 0
Received 3 Likes
on
2 Posts
Car: 86 T/A & 88 GTA
Engine: 305 LB9 TPI & 350 LO5 TPI
Transmission: Jasper 4L60 x2
Axle/Gears: 2.77/posi LSD & 2.73/posi LSD
Re: Universal Seqqential Turn Signals - Round 3
come on lou!!! you need to do the conversion too. cant let the rest of us have all the fun. i want to see a maro with this too!!!
04-12-2008, 12:12 PM
#135
Junior Member
Join Date: Sep 2007
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Re: Universal Seqqential Turn Signals - Round 3
RE: STS on an 88 bird.
Heyo! Can you fire me a pic of your installation of the turn signal wiring for the 88 firebird? I picked up an STS module from stephen, but lost the instructions to wire it up!
Cheers,
Gabe
Heyo! Can you fire me a pic of your installation of the turn signal wiring for the 88 firebird? I picked up an STS module from stephen, but lost the instructions to wire it up!
Cheers,
Gabe
04-12-2008, 02:46 PM
#136
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Universal Seqqential Turn Signals - Round 3
Instructions emailed!
I have 1 module left...No plans to build more, any time soon.
I have 1 module left...No plans to build more, any time soon.
04-12-2008, 04:30 PM
#137
04-12-2008, 05:00 PM
#138
Senior Member
Join Date: Sep 2007
Location: Chicagoland Area
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 GTA/'86 TA/98 TA
Engine: 350/350/LS1
Transmission: R4/T5/4L60E
Axle/Gears: 3.23/2.77/3.73
Re: Universal Seqqential Turn Signals - Round 3
Whooo Hoooo
video time let see them guys post them up.
Still raining here in Chicagoland Its been 3 days and it sucks.
video time let see them guys post them up.
Still raining here in Chicagoland Its been 3 days and it sucks.
04-15-2008, 01:37 PM
#139
Junior Member
Join Date: Sep 2006
Location: Philly, PA
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Trans Am
Engine: 305 Crossfire
Transmission: TH200 automatic
Re: Universal Seqqential Turn Signals - Round 3
Got my STS unit a few weeks ago and finally got it in. Over all it was pretty easy to wire up. They do seem to flash fast so I’ll have to see if I can find a slower flasher. Anyone have any ideas?
I have a video, but it’s a large file. Maybe I can get my hubby to make it a little smaller. The only problem I have is the two new sockets aren’t lighting up quite like I expected. They are dim and many times don’t light up at all, especially on the left side. Does anyone have any ideas? Could it be the way I wired it up?
http://80sknight.homedns.org:8080/JennTail/
Even with that minor problem I still like them. Thanks guys for putting them together.
deardreamer82
I have a video, but it’s a large file. Maybe I can get my hubby to make it a little smaller. The only problem I have is the two new sockets aren’t lighting up quite like I expected. They are dim and many times don’t light up at all, especially on the left side. Does anyone have any ideas? Could it be the way I wired it up?
http://80sknight.homedns.org:8080/JennTail/
Even with that minor problem I still like them. Thanks guys for putting them together.
deardreamer82
04-15-2008, 02:02 PM
#140
Supreme Member
iTrader: (3)
Join Date: Jul 2004
Posts: 2,989
Likes: 0
Received 5 Likes
on
4 Posts
Car: '91 Z28 convertible
Engine: TPI
Transmission: T5
Axle/Gears: 3.27 posi disc
Re: Universal Seqqential Turn Signals - Round 3
Yes, the flashers on some cars are slightly faster which doesn't allow the outermost lightbulbs to turn on fully and they look dim.
Slowing down the flasher is the solution. You can buy 5 flashers and 5 of them will be faster than your current one. Or you can buy 5 flashers and 5 of them will be slower than your current one. It's hit-or-miss. Hard to tell, they're not calibrated.
You can also install one of the aftermarket adjustable flashers. I've seen them for $12 or so.
Hope this helps.
Lou
Slowing down the flasher is the solution. You can buy 5 flashers and 5 of them will be faster than your current one. Or you can buy 5 flashers and 5 of them will be slower than your current one. It's hit-or-miss. Hard to tell, they're not calibrated.
You can also install one of the aftermarket adjustable flashers. I've seen them for $12 or so.
Hope this helps.
Lou
04-15-2008, 02:22 PM
#141
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Universal Seqqential Turn Signals - Round 3
Got my STS unit a few weeks ago and finally got it in. Over all it was pretty easy to wire up. They do seem to flash fast so I’ll have to see if I can find a slower flasher. Anyone have any ideas?
I have a video, but it’s a large file. Maybe I can get my hubby to make it a little smaller. The only problem I have is the two new sockets aren’t lighting up quite like I expected. They are dim and many times don’t light up at all, especially on the left side. Does anyone have any ideas? Could it be the way I wired it up?
http://80sknight.homedns.org:8080/JennTail/
Even with that minor problem I still like them. Thanks guys for putting them together.
deardreamer82
I have a video, but it’s a large file. Maybe I can get my hubby to make it a little smaller. The only problem I have is the two new sockets aren’t lighting up quite like I expected. They are dim and many times don’t light up at all, especially on the left side. Does anyone have any ideas? Could it be the way I wired it up?
http://80sknight.homedns.org:8080/JennTail/
Even with that minor problem I still like them. Thanks guys for putting them together.
deardreamer82
----------
You know....Outta 60 units sold, I think that is video #3! Several said they were going on Camaros, but no Camaro video yet.
Last edited by Stephen; 04-15-2008 at 02:27 PM. Reason: Automerged Doublepost
04-15-2008, 02:30 PM
#142
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Universal Seqqential Turn Signals - Round 3
I'm considering LED bulbs since they turn on/off MUCH faster, & the 3rd bulbs should light before the flasher turns off.
04-15-2008, 06:01 PM
#143
Junior Member
Join Date: Sep 2006
Location: Philly, PA
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Trans Am
Engine: 305 Crossfire
Transmission: TH200 automatic
Re: Universal Seqqential Turn Signals - Round 3
Hi guys. Thanks for responding so fast.
Hey Lou, do you have any links to the adjustable flashers? I like that idea, and it might be the best way to slow them down.
I wondered the same thing about the bulbs. I went through the wiring twice checking all of the connections and making sure they were tight. Maybe I missed something. I even reconnected each wire to the STS box, just to make sure that was good. Oh, we also chucked one bulb, put in a new one and changed bulbs around to make sure the bulbs were all good.
Steve, I have been thinking about doing the LED's too. I really like the idea and I've been watching the other thread about it. I think the STS will look really nice with them... and you can control more of the resistance.
I just did a search for wiring. I've tried a few different ways and I was wondering which way Lou did his wiring. Maybe going over the wiring again will help correct the problem.
Thanks again guys.
deardreamer82
Hey Lou, do you have any links to the adjustable flashers? I like that idea, and it might be the best way to slow them down.
I wondered the same thing about the bulbs. I went through the wiring twice checking all of the connections and making sure they were tight. Maybe I missed something. I even reconnected each wire to the STS box, just to make sure that was good. Oh, we also chucked one bulb, put in a new one and changed bulbs around to make sure the bulbs were all good.
Steve, I have been thinking about doing the LED's too. I really like the idea and I've been watching the other thread about it. I think the STS will look really nice with them... and you can control more of the resistance.
I just did a search for wiring. I've tried a few different ways and I was wondering which way Lou did his wiring. Maybe going over the wiring again will help correct the problem.
Thanks again guys.
deardreamer82
04-15-2008, 06:44 PM
#144
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Universal Seqqential Turn Signals - Round 3
He seems to think housing needs (fixes/upgrades/improvements) are more important than modding his car!
Last edited by Stephen; 04-15-2008 at 08:22 PM.
04-16-2008, 09:58 AM
#145
TGO Supporter
Join Date: Mar 2001
Location: Fort Wayne,In
Posts: 146
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 Formula 350
Engine: 355 HSR
Transmission: Rossler 700R4
Axle/Gears: 9 bolt/3.27
Re: Universal Seqqential Turn Signals - Round 3
I cannot believe I missed this article till today. Of course, two days after you sell out!!!!Very nice work.
IF you EVER do another run I AM IN!!!!! Money waiting!!
IF you EVER do another run I AM IN!!!!! Money waiting!!
04-16-2008, 12:58 PM
#146
Junior Member
iTrader: (2)
Join Date: Oct 2006
Location: Jefferson, GA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Re: Universal Seqqential Turn Signals - Round 3
D***it I missed it, stupid thread notification!@#$! Count me as number 2 in line for the next round! Please ppl, if you want and WILL buy these speak up and maybe we can get ONE MORE batch!!!
Adam
Adam
04-16-2008, 01:15 PM
#147
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Universal Seqqential Turn Signals - Round 3
Got ya'll down as #2 & #3. Had a PM yesterday for #1.
04-16-2008, 01:21 PM
#148
Supreme Member
iTrader: (3)
Join Date: Jul 2004
Posts: 2,989
Likes: 0
Received 5 Likes
on
4 Posts
Car: '91 Z28 convertible
Engine: TPI
Transmission: T5
Axle/Gears: 3.27 posi disc
Re: Universal Seqqential Turn Signals - Round 3
Well, we need to find a decent board manufacturer first (anybody know any companies in Mexiko?).
And if we get lucky, round #4 might happen. But as with batch #3, some pre-pays would be required.
So no promises right now.
Lou
And if we get lucky, round #4 might happen. But as with batch #3, some pre-pays would be required.
So no promises right now.
Lou
Last edited by BigBadLou; 04-16-2008 at 01:34 PM.
04-16-2008, 05:56 PM
#149
Junior Member
iTrader: (2)
Join Date: Oct 2006
Location: Jefferson, GA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Re: Universal Seqqential Turn Signals - Round 3
I am more than happy to pre-pay. Stephen, can I pm you my personal email addy so that I don't miss out on the next opportunity?
Adam
Adam
04-16-2008, 06:03 PM
#150
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Universal Seqqential Turn Signals - Round 3
I've already started a list, based on screen names, but can easily put the email address in too. Got you in at #3.