Electronics Need help wiring something up? Thinking of adding an electrical component to your car? Need help troubleshooting that wiring glitch?

HELP PLEASE

Thread Tools
 
Search this Thread
 
Old 06-25-2008, 02:39 PM
  #1  
Member
Thread Starter
 
xsupermann69x's Avatar
 
Join Date: Nov 2006
Location: Wilmington, NC
Posts: 130
Likes: 0
Received 0 Likes on 0 Posts
Car: 1991 Chevy Camaro RS
Engine: V6 3.1L
Transmission: automatic
HELP PLEASE

Alright so heres my car.
1991 camaro rs 3.1 v6

just got it back from paint shop and have been having problems sense
drove it 100 miles and now it will crank and fire/start then stall right away sometime is with just crank and never start.
what is the problem?
i have a python 2 way alarm system have had that tested to see if that is cutting it off or not. that all checks out.
new fuel pump put in cost me 400 for all that. now im having to trailer it everywhere i go which is 50 per day so this is becoming very expensive. please help me. im not exactly sure if this is where it goes but if its not please move it to where it does go. thanks Kurt
Old 06-26-2008, 02:06 PM
  #2  
Junior Member
 
Crazydave2005's Avatar
 
Join Date: Jun 2008
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Re: HELP PLEASE

Is your check engine light on?
Old 06-28-2008, 01:03 AM
  #3  
Supreme Member

iTrader: (7)
 
Firebat's Avatar
 
Join Date: May 2005
Posts: 3,786
Likes: 0
Received 2 Likes on 2 Posts
Re: HELP PLEASE

Check fuel pressure yet? If thats bad then start with replacing the fuel filter, even if you just replaced it recently.
Old 06-29-2008, 05:15 PM
  #4  
Member
Thread Starter
 
xsupermann69x's Avatar
 
Join Date: Nov 2006
Location: Wilmington, NC
Posts: 130
Likes: 0
Received 0 Likes on 0 Posts
Car: 1991 Chevy Camaro RS
Engine: V6 3.1L
Transmission: automatic
Re: HELP PLEASE

Originally Posted by Firebat
Check fuel pressure yet? If thats bad then start with replacing the fuel filter, even if you just replaced it recently.

yeah we did it was at 40psi




All times are GMT -5. The time now is 10:39 AM.