Lakewood shocks, slick, turbo400 driveshaft, and more
04-05-2008, 07:38 PM
#1
Member
Thread Starter
iTrader: (6)
Join Date: Jul 2003
Location: Milwaukee, WI
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 z28
Engine: BBC
Transmission: TH400
Lakewood shocks, slick, turbo400 driveshaft, and more
2 x 82-92 lakewood 50/50 shocks $50
Holley 750 double pumper rebuilt with about 800 miles on it. Milled off choke and has a idle adjuster **** on the throttle. Works great, just it's not ideal for my car. Looking for $225
1 x 28x10.5/15 ET drag slick 80% tread left $60
Custom turbo400 driveshaft built to handle horsepower $250
Distributor with proform 50k volt coil kit - $35
30% reduction crank pulley short water pump aluminum - $20
Standard sbc starter straight bolt pattern - 300 miles - $30
82-92 radiator, used for 50 miles, lifetime warranty from autozone - $40
Mark William 3" chromoly driveshaft center tube, no yokes or end pieces, about 48" long - $30
Weiand Stealth sbc intake manifold - one thermostat bolt stripped out - 100 miles on it - $30
Holley 750 double pumper rebuilt with about 800 miles on it. Milled off choke and has a idle adjuster **** on the throttle. Works great, just it's not ideal for my car. Looking for $225
1 x 28x10.5/15 ET drag slick 80% tread left $60
Custom turbo400 driveshaft built to handle horsepower $250
Distributor with proform 50k volt coil kit - $35
30% reduction crank pulley short water pump aluminum - $20
Standard sbc starter straight bolt pattern - 300 miles - $30
82-92 radiator, used for 50 miles, lifetime warranty from autozone - $40
Mark William 3" chromoly driveshaft center tube, no yokes or end pieces, about 48" long - $30
Weiand Stealth sbc intake manifold - one thermostat bolt stripped out - 100 miles on it - $30
04-05-2008, 07:55 PM
#2
Senior Member
iTrader: (1)
Join Date: Dec 2006
Location: Bedford Tx
Posts: 998
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Z28 1LE
Engine: 370CID GenIII
Transmission: 4l60e
Axle/Gears: 4.33 Moser 9inch
Re: Lakewood shocks, slick, turbo400 driveshaft, and more
how much for the shocks shipped to 76705
04-05-2008, 08:50 PM
#4
Member
iTrader: (4)
Join Date: Jun 2007
Location: Rock Falls, Illinois
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 and 91 Camaro RS
Engine: 350ci TPI and 305ci TBI
Transmission: 700R4
Axle/Gears: 2.73 One-wheel wonder
Re: Lakewood shocks, slick, turbo400 driveshaft, and more
Will the intake manifold fit 87 and up heads?
04-05-2008, 09:01 PM
#6
Senior Member
iTrader: (1)
Join Date: Dec 2006
Location: Bedford Tx
Posts: 998
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Z28 1LE
Engine: 370CID GenIII
Transmission: 4l60e
Axle/Gears: 4.33 Moser 9inch
Re: Lakewood shocks, slick, turbo400 driveshaft, and more
hey man im gonna pass on those shocks, they are a good deal though sorry for the troubles....
04-06-2008, 02:58 PM
#7
Junior Member
iTrader: (10)
Join Date: Nov 2005
Location: delavan wiscons
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Engine: 350
Transmission: t-5
Re: Lakewood shocks, slick, turbo400 driveshaft, and more
want some info on the turbo 400 drive shaft. what kind of shape is int in? What size u joints? 1350?
Trending Topics
04-06-2008, 03:11 PM
#8
Member
Thread Starter
iTrader: (6)
Join Date: Jul 2003
Location: Milwaukee, WI
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 z28
Engine: BBC
Transmission: TH400
Re: Lakewood shocks, slick, turbo400 driveshaft, and more
It's almost brand new, used for less than 100 miles. Not sure on u joints, it bolted up to my 9" so it's probably a 1350.
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
7
10-08-2015 08:34 PM
