BBC 454 for sale or trade (again)
#1
Junior Member
Thread Starter
iTrader: (4)
Join Date: Sep 2008
Location: Indiana
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28
Engine: 355ci
Transmission: WC T-5 (untill it breaks)
Axle/Gears: 3.73 Posi
BBC 454 for sale or trade (again)
well i thought this was sold but the guy that was going to buy it never came through with the cash, so here we are again!
the engine is out of mine and my brothers pulling truck, we took it out to install a diesel engine, to try an run with the BIG DOGS we will find out next season. But anyway here is a list of some of the stuff that is in it and was done to it.
BLOCK:
-bored and honed w.torgue plate to .030 over
-magnafluxed and pressure checked
-new cam bearings and freeze plugs installed
HEADS:
-large oval port, open chambers
-new valves,guides,seats,and seals
-machined out to 2.19intake 1.88exhaust valve sizes
-roller tip steel rockers
-new 3/8 pusrod guid plates/and studes
INTERNALS:
-Forged Steel GM Crank .010/.010 under
-Forged scat I-beam rods w/7/16 arp bolts
-Forged mahul aluminum pistons w/small dome/ with current heads 10.5/1 compression
-comp cam hyd flat tappet(230 int./230 exh-0.520 int./0.520 exh. lift)
-all fel-pro gaskets and seals
-cloyes true double roller timing set
-melling oiling system
- 3/8 hardend pushrods
This is a very strong engine, and would not be to radical for a street machine, but could swap out to a smaller cam to make for better street maners. its in long block form already sold the intake and carb and the distributor that was on it but do have others available if the buyer would need them.
ASKING PRICE $2000.00 OBO
TRADE FOR TPI camaro
please le me know if there is any questions or if you would like to see any pics and I will load them up!!!!!!!!
thanks!
the engine is out of mine and my brothers pulling truck, we took it out to install a diesel engine, to try an run with the BIG DOGS we will find out next season. But anyway here is a list of some of the stuff that is in it and was done to it.
BLOCK:
-bored and honed w.torgue plate to .030 over
-magnafluxed and pressure checked
-new cam bearings and freeze plugs installed
HEADS:
-large oval port, open chambers
-new valves,guides,seats,and seals
-machined out to 2.19intake 1.88exhaust valve sizes
-roller tip steel rockers
-new 3/8 pusrod guid plates/and studes
INTERNALS:
-Forged Steel GM Crank .010/.010 under
-Forged scat I-beam rods w/7/16 arp bolts
-Forged mahul aluminum pistons w/small dome/ with current heads 10.5/1 compression
-comp cam hyd flat tappet(230 int./230 exh-0.520 int./0.520 exh. lift)
-all fel-pro gaskets and seals
-cloyes true double roller timing set
-melling oiling system
- 3/8 hardend pushrods
This is a very strong engine, and would not be to radical for a street machine, but could swap out to a smaller cam to make for better street maners. its in long block form already sold the intake and carb and the distributor that was on it but do have others available if the buyer would need them.
ASKING PRICE $2000.00 OBO
TRADE FOR TPI camaro
please le me know if there is any questions or if you would like to see any pics and I will load them up!!!!!!!!
thanks!
#4
Junior Member
Thread Starter
iTrader: (4)
Join Date: Sep 2008
Location: Indiana
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28
Engine: 355ci
Transmission: WC T-5 (untill it breaks)
Axle/Gears: 3.73 Posi
Re: BBC 454 for sale or trade (again)
any reasonable offer will be considered, (tired of triping over it in my garage) needs to go to a good home! I will leave this on here till next week then its off to e-bay I guess.
thanks
thanks
#7
Junior Member
Thread Starter
iTrader: (4)
Join Date: Sep 2008
Location: Indiana
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28
Engine: 355ci
Transmission: WC T-5 (untill it breaks)
Axle/Gears: 3.73 Posi
Re: BBC 454 for sale or trade (again)
engine sold over the weekend(cash in hand this time)
Thread
Thread Starter
Forum
Replies
Last Post
dimented24x7
Tech / General Engine
4
09-06-2015 03:51 PM