chevy1500z71

i recently purchased a used motor from a circle trac car and have a few left over parts i will not need. only a few races on these parts then they sat for quite a while untill i purchased the motor. heres the list, i will add pictures this weekend, maybe ill get some time after work during the week. right now my descriptions are basic on a few parts, will get more info when io get a chance to go through the parts more.

aluminum anodized black main and waterpump pulleys, pulleys will run 2 v-belts, will get sizes later.

-delco hei distributer, coil on cap and i have a receipt for it here from performance distributes for a "racing hei coil kit" and a "dyna-moodule" whatever that is, comes with it.

-circle trac valve covers, fair shape, no dents, just dirty with a little surface rust.

-mechanical fan, flex-a-lite 18.25"

-2 barrel carburetor, dont know a whole lot about it other than its 500cfm and must be considered a racing carb being that it has no choke. comes with whatever fittings are on it, youl see in pictures soon. comes with adapter for use with a standard spread bore manifold.

-mechanical fuel pump.


------------------------------------------------

other parts i have to sell

(stock parts form 95 chevy pickup w/350 tbi)
-stock oil pan
-stock valve covers
-stock exhaust manifolds
-flowmaster 40 series, single 3" in, duel 2.5" out
-cast iron water pump
-tbi stock heads, complete came from running motor.
-brand new flowmaster super 44, used only for a week until we all realized it was too loud for my moms car and switched to a 50 series. 3" in/out, center inlet, offset out.
-obs chevy front hood visor



i also may be selling my set of #992 gm heads with stainless valves and isky dual springs, no cracks.


make me an offer on anything, heres the only picture i have for now, has all of the parts listed in the first section layed out in the garage, the flowmaster 10 series in the picture was traded to my buddy for his 40 series as listed for sale above.


those heads are the 992s, not the tbi stockers. if you buy the distributer or anything, you can have those red taylor wires, they should be good, i dont need em.

RayRay1519

iTrader: (2)

What is the cast number on the stock heads?

bradley23150

iTrader: (10)

Heads are "14019926" I presume? Are these considered "Vortecs"? Whats the valve sizes? Thanks.

How much do you want on either set of heads? They'll work with a performer intake and rochester, correct?

chevy1500z71

the tbi heads have the angled holes for a few bolts on the intake, the 992s will work with your standard older style intake manifold as they have strait holes for the intake. both should have 1.9something intake and 1.50 exhaust valves. the tbi heads are smaller chambers, the 992s are 75cc chambers. i dont know a whole lot about the tbi heads becasue they are on my semi-running truck right now. i know anything you need to know about the 992s. the full part # is 3998993.

the 992s are great heads, they have isky double springs, arp screw in studs, stainless valves, all accessory holes, no cracks, ready to bolt on and run. i am asking 225 for them.

as for the tbi heads, they come bone stock complete down to the rocker studs, make an offer, im not expecting to get a fortune for these.

bradley23150

iTrader: (10)

225 shipped? Interested than. lol

chevy1500z71

shipping is normally like $90, how bout 300 shipped.