[OH] SBC Chevy parts
#1
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2004
Location: medina, ohio
Posts: 236
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 GTA
Engine: 383 HSR Procharged
Transmission: TKO600
Axle/Gears: Moser 9", 35 spline Wavetrac 3.89's
SBC Chevy parts
350 +.060 flattop motor for sale. Assembled with a couple thousand miles on it. Block ID 14010207. 4-bolt mains. New iron rings. New bearings. No heads(look below). Forged crank. ARP head bolts. Has Edelbrock Performer RPM cam installed. True roller double roller timing chain. HV oil pump. Very slight surface rust in a couple cylinders from sitting in the garage. Most of it cleans up with you finger. Comes together with the waterpump,balancer,pulleys,brackets,flexplate. No starter. Made 415hp with 215cc runner Dart's on it and a 750 carb. $500obo
Edelbrock Performer RPM manifold. 4 Center bolt holes elongated to accomodate '87up center bolt heads. Works on pre-87 heads as well. Nice shape. Used 1 month. Tested on my '87 TPI motor and ran great with a 750carb. $100
Valve springs, 16. Single with damper and steel retainers. 1.52" O.D. good for upto .520" lift. Used 1 month. $40
Roller Rockers. Summit # G6905. 1.5 ratio. Includes posi locks. Used 1 month. $125
Used stock heads. 462624 . Originally off the block listed above. 76cc with the 1.94 valves. Ran good but need rebuilt.
Interesting trades considered. (ie.4 wheeler)
Call for questions. Chris 330-204-4199 or c_lehman67@hotmail.com. Thanks.
Edelbrock Performer RPM manifold. 4 Center bolt holes elongated to accomodate '87up center bolt heads. Works on pre-87 heads as well. Nice shape. Used 1 month. Tested on my '87 TPI motor and ran great with a 750carb. $100
Valve springs, 16. Single with damper and steel retainers. 1.52" O.D. good for upto .520" lift. Used 1 month. $40
Roller Rockers. Summit # G6905. 1.5 ratio. Includes posi locks. Used 1 month. $125
Used stock heads. 462624 . Originally off the block listed above. 76cc with the 1.94 valves. Ran good but need rebuilt.
Interesting trades considered. (ie.4 wheeler)
Call for questions. Chris 330-204-4199 or c_lehman67@hotmail.com. Thanks.
#5
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2004
Location: medina, ohio
Posts: 236
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 GTA
Engine: 383 HSR Procharged
Transmission: TKO600
Axle/Gears: Moser 9", 35 spline Wavetrac 3.89's
Re: SBC Chevy parts
I can, but last time I checked shipping companies here, to crate it and ship was around $500 or so, maybe a little less. That was about a year ago. If you want I can get a more current quote. Let me know.
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
11-14-2015 12:02 AM
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
7
08-20-2015 09:36 PM