[OR] 350 TBI Fuel Injection with Carb adapter - $150
#1
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Oregon
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Camaro RS
Engine: 5.7L Vortec TBI
Transmission: Built 700R4 2800 stall
350 TBI Fuel Injection with Carb adapter - $150
This system was running in a 90 Camaro with a 300hp Vortec 350 running a 4 barrel intake.
Comes with a computer from a 1989 Caprice Cop Car(performance tune), all sensors except a 350 knock sensor, wiring harness, 350 TBI unit, distributor, coil, spark plug wires, air cleaner assembly, & a TBI to 4 barrel adapter(paid $46 for it).
Engine not included. Picture is to show what the setup looked like in my Son's 90 Camaro.
Here's my Craigslist ad:
http://portland.craigslist.org/wsc/pts/1814723590.html
Shipping will be actual cost.
Comes with a computer from a 1989 Caprice Cop Car(performance tune), all sensors except a 350 knock sensor, wiring harness, 350 TBI unit, distributor, coil, spark plug wires, air cleaner assembly, & a TBI to 4 barrel adapter(paid $46 for it).
Engine not included. Picture is to show what the setup looked like in my Son's 90 Camaro.
Here's my Craigslist ad:
http://portland.craigslist.org/wsc/pts/1814723590.html
Shipping will be actual cost.
Last edited by Heslekrants; 06-29-2010 at 08:54 AM.
#2
Senior Member
iTrader: (8)
Join Date: Jul 2006
Location: Davisburg, MI
Posts: 683
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Evoluzione, 84 TransAm, 05 GTO
Engine: LT1, L98, LS2
Transmission: (2) T56 & (1) 700R4
Axle/Gears: Moser 12-bolt w/3.73 & Stock
Re: 350 TBI Fuel Injection with Carb adapter - $150
Is the adapter for a Rochester style intake?
#3
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Oregon
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Camaro RS
Engine: 5.7L Vortec TBI
Transmission: Built 700R4 2800 stall
Re: 350 TBI Fuel Injection with Carb adapter - $150
This is the adapter I have. It should fit most 4 barrel intakes.
Trans-Dapt Performance Products 2210 TBI Adapter -Trans-Dapt Performance throttle body to carburetor adapters allow you to mount a OEM or Holley TBI unit on most any manifold, saving you the expense of buying a different manifold. Made from high-quality cast aluminum, these adapters provide a smooth transition from the throttle body to the intake manifold for trouble-free operation.
Trans-Dapt Performance Products 2210 TBI Adapter -Trans-Dapt Performance throttle body to carburetor adapters allow you to mount a OEM or Holley TBI unit on most any manifold, saving you the expense of buying a different manifold. Made from high-quality cast aluminum, these adapters provide a smooth transition from the throttle body to the intake manifold for trouble-free operation.
#4
Senior Member
iTrader: (8)
Join Date: Jul 2006
Location: Davisburg, MI
Posts: 683
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Evoluzione, 84 TransAm, 05 GTO
Engine: LT1, L98, LS2
Transmission: (2) T56 & (1) 700R4
Axle/Gears: Moser 12-bolt w/3.73 & Stock
Re: 350 TBI Fuel Injection with Carb adapter - $150
It appears I would need the 2011 adapter for my car. The 2210 is listed for square bore holley intakes. Good deal though, good luck.
Thread
Thread Starter
Forum
Replies
Last Post
84z96L31vortec
Tech / General Engine
7
08-20-2017 12:16 AM
84z96L31vortec
North East Region
1
08-10-2015 08:27 PM