Parting out 355 twin turbo motor. Forged!
03-07-2014, 10:03 PM
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Dec 2006
Location: Detroit Mi
Posts: 52
Received 0 Likes
on
0 Posts
Car: 86 Z
Engine: 400 sbc
Transmission: t-56
Axle/Gears: 4.10
Parting out 355 twin turbo motor. Forged!
Parting out 355 SBC turbo motor. All parts have very little or no time on them. Selling as complete engine, complete top end, or complete bottom end for now.
Top End:
Brodix Race Rite aluminum heads. Rr180. 180cc runner. 67cc chamber. Heads look like they have more like minutes than hours of use on them. Look great. $1500+ from jegs.
-includes Comp Cams triple valve springs for included cam.
-comp cams 4808 guide plates
-arp 3/8 rocker studs.
Comp cams xr288 hr-10 hydraulic roller cam.
Comp cams hydraulic roller lifters.
Comp Cams 7.300 push rods.
Would run $2200+ from jegs.
Bottom End:
Eagle Forged 4340 crankshaft. 3.48 stroke. 1pc RMS. new in box.
Eagle forged h beam rods.
Speed Pro Forged Blower pistons.
Product Line: Speed-Pro Power Forged Pistons
Bore (in): 4.030 in.
Bore (mm): 102.362mm
Piston Material: Forged aluminum
Piston Style: Dish
Compression Distance (in): 1.560 in.
Piston Head Volume (cc): +21.10cc
Valve Reliefs: Trough
Wrist Pin Style: Press fit or floating
Pin Diameter (in): 0.927 in.
Top Ring Thickness: 5/64 in.
Second Ring Thickness: 5/64 in.
Oil Ring Thickness: 3/16 in.
Quantity: Sold individually.
Notes: D cup piston crown design.
Pistons are hung and balanced on rods.
Cat racing billet main caps. Mb-350sr. 350. 4 bolt mains. 1 pc rms. New in box.
350 SBC roller block. 1 PC RMS. Boiled and cleaned. Ready for machining!
1800 for the top end.
1300 for the bottom end.
Buy it all and I will include full med ignition system.
Consider trades for on center (center inlet) turbos for my 427 SBC project or 9" rear or center section. Locates 20 mins south of Detroit. Shipping available.
Top End:
Brodix Race Rite aluminum heads. Rr180. 180cc runner. 67cc chamber. Heads look like they have more like minutes than hours of use on them. Look great. $1500+ from jegs.
-includes Comp Cams triple valve springs for included cam.
-comp cams 4808 guide plates
-arp 3/8 rocker studs.
Comp cams xr288 hr-10 hydraulic roller cam.
Comp cams hydraulic roller lifters.
Comp Cams 7.300 push rods.
Would run $2200+ from jegs.
Bottom End:
Eagle Forged 4340 crankshaft. 3.48 stroke. 1pc RMS. new in box.
Eagle forged h beam rods.
Speed Pro Forged Blower pistons.
Product Line: Speed-Pro Power Forged Pistons
Bore (in): 4.030 in.
Bore (mm): 102.362mm
Piston Material: Forged aluminum
Piston Style: Dish
Compression Distance (in): 1.560 in.
Piston Head Volume (cc): +21.10cc
Valve Reliefs: Trough
Wrist Pin Style: Press fit or floating
Pin Diameter (in): 0.927 in.
Top Ring Thickness: 5/64 in.
Second Ring Thickness: 5/64 in.
Oil Ring Thickness: 3/16 in.
Quantity: Sold individually.
Notes: D cup piston crown design.
Pistons are hung and balanced on rods.
Cat racing billet main caps. Mb-350sr. 350. 4 bolt mains. 1 pc rms. New in box.
350 SBC roller block. 1 PC RMS. Boiled and cleaned. Ready for machining!
1800 for the top end.
1300 for the bottom end.
Buy it all and I will include full med ignition system.
Consider trades for on center (center inlet) turbos for my 427 SBC project or 9" rear or center section. Locates 20 mins south of Detroit. Shipping available.
03-30-2014, 09:57 PM
#2
Junior Member
Thread Starter
iTrader: (3)
Join Date: Dec 2006
Location: Detroit Mi
Posts: 52
Received 0 Likes
on
0 Posts
Car: 86 Z
Engine: 400 sbc
Transmission: t-56
Axle/Gears: 4.10
Re: Parting out 355 twin turbo motor. Forged!
Bump! Knock $100 off each price! Let's move these parts!
Thread
Thread Starter
Forum
Replies
Last Post
84z96L31vortec
Tech / General Engine
7
08-20-2017 12:16 AM
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
11-14-2015 12:02 AM