[FL] PCM, 700r4 Speedo Kit, bushing kit
06-09-2016, 10:16 PM
#1
Junior Member
Thread Starter
iTrader: (6)
Join Date: Feb 2008
Location: Florida
Posts: 87
Likes: 0
Received 4 Likes
on
4 Posts
Car: 1989 Chevorolet Iroc-z convertible
Engine: 383, holley terminator efi
Transmission: T-56
Axle/Gears: stock 10 bolt w/ 3.73
PCM, 700r4 Speedo Kit, bushing kit
700r4 recalibration kit - SOLD
ECM Serial # 01227165, Memcal AUJN - $49 Shipped OBO
Memcal code is "AUJN 1615 0502" is from a 1989, automatic, 3.27 gear ratio, F-body. Table for TPI Memcal codes http://chevythunder.com/prom_bcc_1989.htm
Also it comes with the plastic bracket and the one cover screw is stripped, doesn't affect anything.
https://imgur.com/Z5vTJMePolyurethane Track/Panhard bushing kit &
Rear lower control arm polyurethane bushings - Both for $45 Shipped OBO
https://imgur.com/1xATEZz
https://imgur.com/knwwFPB
ECM Serial # 01227165, Memcal AUJN - $49 Shipped OBO
Memcal code is "AUJN 1615 0502" is from a 1989, automatic, 3.27 gear ratio, F-body. Table for TPI Memcal codes http://chevythunder.com/prom_bcc_1989.htm
Also it comes with the plastic bracket and the one cover screw is stripped, doesn't affect anything.
https://imgur.com/Z5vTJMePolyurethane Track/Panhard bushing kit &
Rear lower control arm polyurethane bushings - Both for $45 Shipped OBO
https://imgur.com/1xATEZz
https://imgur.com/knwwFPB
Last edited by IROCUDREW; 07-05-2016 at 12:35 PM.
06-13-2016, 03:02 PM
#2
06-15-2016, 04:28 PM
#3
Junior Member
Join Date: Dec 2014
Location: Leicester NC
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Iroc,
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: 327
Re: PCM, 700r4 Speedo Kit, bushing kit
what year model did the ecm come from and is the prom in it?
06-26-2016, 10:58 PM
#4
Junior Member
Thread Starter
iTrader: (6)
Join Date: Feb 2008
Location: Florida
Posts: 87
Likes: 0
Received 4 Likes
on
4 Posts
Car: 1989 Chevorolet Iroc-z convertible
Engine: 383, holley terminator efi
Transmission: T-56
Axle/Gears: stock 10 bolt w/ 3.73
Re: PCM, 700r4 Speedo Kit, bushing kit
Yes, the prom is in it and I am not 100% on the year for the ecm as it came out of my camaro that had a corvette 350 installed before I purchased it. The car ran great with the ecm installed and have no doubt it is a 350. However I do not know how to verify if it is from a 350 or a 305.
07-05-2016, 12:24 PM
#6
Junior Member
Thread Starter
iTrader: (6)
Join Date: Feb 2008
Location: Florida
Posts: 87
Likes: 0
Received 4 Likes
on
4 Posts
Car: 1989 Chevorolet Iroc-z convertible
Engine: 383, holley terminator efi
Transmission: T-56
Axle/Gears: stock 10 bolt w/ 3.73
Re: PCM, 700r4 Speedo Kit, bushing kit
I opened up the pcm to check the memcal code. The code is "AUJN 1615 0502". I found a table on chevy thunder that has a list of prom codes. From what I read there it seems that the prom is from a 1989, automatic, 3.27 gear ratio from a F body. I'm not sure what the second and third set of numbers stand for. Here's the website I found it from http://chevythunder.com/prom_bcc_1989.htm
If anyone has insight on the other numbers please let me know.
If anyone has insight on the other numbers please let me know.
Thread
Thread Starter
Forum
Replies
Last Post
1Aauto
Sponsored Vendors
7
06-21-2017 12:59 PM
1Aauto
Sponsored Vendors
4
02-16-2017 02:38 PM
1Aauto
Sponsored Vendors
1
07-27-2016 01:25 PM
1Aauto
Sponsored Vendors
1
06-14-2016 11:54 AM
1Aauto
Sponsored Vendors
3
06-03-2016 04:50 PM