[IL] *NEW* COMP Cams Pro Magnum Roller Rocker Arms 1302-16 for SBC
#1
Senior Member
Thread Starter
*NEW* COMP Cams Pro Magnum Roller Rocker Arms 1302-16 for SBC
These rockers were bought a while back as part of an engine build that never happened. I cut the plastic wrapper of the top tray of rockers to inspect one. They are brand new and never installed.
Asking $285 Shipped OBO
Rocker Arms, Stud Mount, Full Roller, Steel, 1.6 Ratio, Fits 3/8 in. Stud, Chevy, Small Block, Set of 16
COMP Cams Pro Magnum roller rocker arms combine the strength of 8650 chromoly steel and the weight savings of aluminum rockers. COMP Cams took advantage of computer design to simulate the stresses that affect rockers under various operating loads. This allowed the engineers to lessen the rockers' mass at non-critical areas, and strengthen the areas that take the most punishment. The results were rocker arms that are strong where they need to be, and actually weigh 5 percent less at the valve than comparable aluminum rockers.
The newer version of these are more than $50 more and they hardly changed anything. So, save yourself a few dollars with these!
Asking $285 Shipped OBO
Rocker Arms, Stud Mount, Full Roller, Steel, 1.6 Ratio, Fits 3/8 in. Stud, Chevy, Small Block, Set of 16
COMP Cams Pro Magnum roller rocker arms combine the strength of 8650 chromoly steel and the weight savings of aluminum rockers. COMP Cams took advantage of computer design to simulate the stresses that affect rockers under various operating loads. This allowed the engineers to lessen the rockers' mass at non-critical areas, and strengthen the areas that take the most punishment. The results were rocker arms that are strong where they need to be, and actually weigh 5 percent less at the valve than comparable aluminum rockers.
The newer version of these are more than $50 more and they hardly changed anything. So, save yourself a few dollars with these!
#2
Senior Member
Thread Starter
Re: *NEW* COMP Cams Pro Magnum Roller Rocker Arms 1302-16 for SBC
I'm in Lake Zurich Illinois BTW. $275 OBO for local sale.
#3
TGO Supporter/Moderator
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,731
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Re: *NEW* COMP Cams Pro Magnum Roller Rocker Arms 1302-16 for SBC
$225 ?
-- Joe
-- Joe
#4
Senior Member
Thread Starter
#5
Senior Member
Thread Starter
Re: *NEW* COMP Cams Pro Magnum Roller Rocker Arms 1302-16 for SBC
Still available...
#6
Senior Member
Thread Starter
Re: *NEW* COMP Cams Pro Magnum Roller Rocker Arms 1302-16 for SBC
Possible trade pending...
#7
Senior Member
Thread Starter
Re: *NEW* COMP Cams Pro Magnum Roller Rocker Arms 1302-16 for SBC
These have sold...