When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If I do have a grey belt,.. it's gonna' be crap. The buckle would probably work, but I know that the plastic sheath will be cracked and broken. I did have a couple as described, but I don't know if I tossed them or not. If you need one so that your safe I'll go digging,....... but if you want to buy one in good condition ------> I don't have it.
$200---->NO SHIPPING. Not perfect,... but pretty dam good. There are a couple of minor cracks along each side,... they are not going to be visible when installed. There's a couple of small indentations along the windshield edge; this is just from the way they were stored and will not be an issue when the pad gets installed. Pad hasn't been exposed to the sun ( till this afternoon ) , elements, or freezing temps in over a decade, if not longer.
SERIOUS inquiries only please.
Last edited by John in RI; 09-07-2020 at 06:56 PM.
Reason: Price drop
I do have a few of the small parts for the later style Firebird door panels,... but not all of them. Is this the only one you need or are ther others ??
$155 + shipping: 86-91 Hatch Power Pull Down Assembly. pulled from a 91 and it has the small power plug. All 4 guides are completely intact so the PPD assembly doesn't "rattle" like they do when the guides are bad. This unit is fully functional & includes the optional hatch release solenoid ( also tested and working ).
( SOLD ) AutoMeter Auto Gauge RPM Tachometer, Used and working when removed, been on my garage shelf for several years and was not re-tested. $40 + shipping.
SunPro 3-set ( Temp / Volt / OIL Pressure) gauge pack. Gauges were removed in working condition and have been on a shelf for several years. I did not re-connect them for testing. The "shield" around the temp sensor wire is broken in 1 area, but the heavy gauge wire is OK. ( Blue Circle in pic ). The finish isn't perfect anymore, some bubbles in the finish. (Set-up includes an extra Oil Pressure line and a spare Temp Sensor/wiring from a gauge set that I tossed due to cosmetic flaws.) $25 + shipping.
SunPro Temp Gauge/Bezel. Fairly sure it's new, I have never installed this gauge, $25 + Shipping.
Last edited by John in RI; 02-15-2021 at 11:26 AM.
Yup,... dozens of Em'. These things are usually rusty so I'll check & see if I can find any that still have full factory coating on them.
Need just a pair just for the floor,..... or for the rear hatch 'wall' too ?? ( IIRC PPD cars used a pair that was "deeper" on the body than the earlier cars; the ones on the floor were all the same.)
Yup,..... I read both of your questions and will be writing you a PM later this evening. Just wanted to post now so you know that I've seen your messages.
I am looking for a rear wiper switch, rear defroster switch, and their pigtail connectors. This would be for the center console of a 1986 Camaro Berlinetta. Thank you.
I am looking for the Owner’s Manual portfolio package for a 1986 Trans Am. I believe the same package may have been used for all 1986 Pontiac Firebird models.
would you have one of these packages? I already have the Owner’s Manual - just looking for all the other documents.
I have attached a picture of a complete set from a Camaro as reference.
I am looking for a rear wiper switch, rear defroster switch, and their pigtail connectors. This would be for the center console of a 1986 Camaro Berlinetta. Thank you.
Package Shipped !
Originally Posted by 86 Bandit TA
I am looking for the Owner’s Manual portfolio package for a 1986 Trans Am. I believe the same package may have been used for all 1986 Pontiac Firebird models.
would you have one of these packages? I already have the Owner’s Manual - just looking for all the other documents.
I have attached a picture of a complete set from a Camaro as reference.
Sorry, but I don't have the info packet that your looking for. Used to find these things in all the cards I parted and every Thirdgen in the bone-yards when I was a younger man,........ Sure wish I would have considered these things 'worthy' of grabbing back then !! If I get lucky and find anything like this in the near future I'll be sure to let you know !
I did not ?? I seem to recall your name in regards to something (not the recent speaker question about adding a resistor ) but don't remember what it was . Just looked PM's for the last 2 months ( 3 full pages ) and didn't see a PM from you. Sorry ----> But I missed it !
EDIT EDIT 94954 ..........................I see what you mean, John. I can;'t find my post, must have been elsewhere.
How much for the "L" shaped, interior trim piece that starts at the driver's side door sill, and goes up the body, to the top of the 1/4 panel. It covers the metal edges, of the door opening, at the rear of the opening....
I am looking for a lighter/defrost switch bezel plate for a 83-89 Camaro in mint condition, with bright, unfaded, intact white lettering. I don't need the lighter or defroster switch.
Mike: I'm just not sure exactly what trim panel your asking for; Is it possible to send a pic ? The visor is ALMOST self explanatory; Hardtop or T-Top ??
**************************
Matt: I had seen your PM, but didn't answer it before another member had contacted you. I do have a few Bezels and will inspect them and re-post later tonight. Just so I'm sure what to look for: It needs to be a Rear Defroster style with clean "ON / "OFF" printing, but you don't need the Defroster button, Lighter, or Lighter Socket ??
* You are NOT looking for the early style that says "LIGHTER" across the top ----> Right ??
That is correct. No LIGHTER print and I do not need the lighter, lighter socket, or defrost switch. Just a really mint condition bezel with bright and fully intact ON/OFF print.
Mike: I'm just not sure exactly what trim panel your asking for; Is it possible to send a pic ? The visor is ALMOST self explanatory; Hardtop or T-Top ??
**************************
Matt: I had seen your PM, but didn't answer it before another member had contacted you. I do have a few Bezels and will inspect them and re-post later tonight. Just so I'm sure what to look for: It needs to be a Rear Defroster style with clean "ON / "OFF" printing, but you don't need the Defroster button, Lighter, or Lighter Socket ??
* You are NOT looking for the early style that says "LIGHTER" across the top ----> Right ??
HI John. The visor and "Pinch Weld Trim" (my name) are for a 1989 IROC Vert. With the left door open, look at the sill plate, follow it w/ your eyes back to the rear of the car. Said trim begins a few inches before the sill meets the door striker mounting panel, Trim then turns up 90* and rises up the door opening, covering the sheet metal edges, at the rear, of the door opening. Prefer black color but any will do. I can get a photo in a couple days. I took a photo for another TGO seller,but could not get it to load on TGO. Thanks!
Matt, Here's a pic: LEFT-to-RIGHT = $25, $20, $15 + shipping. ( Kitten not included ! )
Mike, I've got NO convertible parts at all. No black visors available either. ( I *THINK* the convertible used T-Top type visors. ) Sorry I can't help !
Drivers side is missing 1 of 4 mounting holes to the cowl area. The cable is included,.. but missing the handle.
Passenger side is missing small plastic "tab" with screw hole. The 2 clips at the rear of the vent hold the vent up,... but I'd drill another screw hole in the front so it does't rattle/move. The cable is included but the handle is missing.
Send me a PM with your ZIP code for a shipping quote and more info if your interested.
I don't think I've got any spares. If I have many more than the 2 bezels that I need for my 88,.... I'll be sure to let you know. Give me a day or 2 to check thru some of my hardware and trim stuff and I'll W/B to let you know.
Hi John,
Do you by chance have any of the following(for an 85 T/A):
- either an external tach that can be mounted to steering column or a properly working in dash tach
- the plastic bezel piece that fits around the stereo/heater controls
- head light retainer ring(drive side)
- top rear quarter panel/corner cut out (pic below)
- front fog lamps
- weather stripping for door jam and T-top
- driver door handle and rod
- torque converter cover for 700r4
The only rear quarters I've got are Camaro quarters so I can't help there. I also don't think I've got any Trans Am fog lights to offer but I should have most of the other parts on your list. I can't provide you with pics and details tonight ( son gets on a Plane in the morning ) but I will write back with an update as soon as I can get details about the parts your looking for. A couple questions for you:
What's your ZIP ??
T-Top weather stripping; Do you mean the 'drip edge' on the T-Top, the rubber seal on the T-Top itself, or the T-Roof - to - body seal ??
The only rear quarters I've got are Camaro quarters so I can't help there. I also don't think I've got any Trans Am fog lights to offer but I should have most of the other parts on your list. I can't provide you with pics and details tonight ( son gets on a Plane in the morning ) but I will write back with an update as soon as I can get details about the parts your looking for. A couple questions for you:
What's your ZIP ??
T-Top weather stripping; Do you mean the 'drip edge' on the T-Top, the rubber seal on the T-Top itself, or the T-Roof - to - body seal ??
LMK !
Thanks John! No rush. T-top weather stripping that goes around the roof/perimeter of the t-top AND the center t-bar piece that the glass slips under in the middle.
I am also looking for the rubber strip that goes around the doors.
91916
Yup,... I do; more than I could possibly list. If you need anything just send me a PM and I'll do what I can to dig thru my stuff and try to find what you need.
FYI: I plan to be away from my PC for at least a full week starting on Saturday. That means while I can spend some time writing tomorrow, I will not be able to search for parts or provide you you with any significant details/info till I return to my PC on about the 20th.
Coming back to an old thread to see if certain parts are available:
Wanting the following brackets on both sides for a 85-90 Camaro:
1. Upper & Lower Bumper Cover to Fender Brackets 2. Spoiler to Fender Brackets. They have to be for the 85-90 style. GM changed the spoiler brackets in 91 when they changed to the "Aero" style GFX.
3. Hatch Pulldown Assembly for 89 style mounting
4. Retainer "clips" for the side marker lights (4 in total)
And do you have any Blue Interior pieces>
Last edited by DontBlnkBadWolf; 09-14-2023 at 11:49 AM.
10-30-2019, 08:56 PM
