KITT1983

iTrader: (3)

no you did not but please send it to me any way

89RS_82Z

iTrader: (2)

ill PM u

89454

i ordered mine off of ebay also. i only ordered 10, and i put 2 of them in my floor lights. i'm gonna order more cause i'm missing 3 from the dash, but you really cant

Guest

heres mine,

Firebirdstu

Bit of an update on mine since some time back dash has come out and new ones gone in

KITT1983

iTrader: (3)

I never got the pm

KITT1983

iTrader: (3)

whos season 3/4 dash is that ?

Firebirdstu

its one from the guys over at www.kirad.co.uk, uk based company, looks pretty good compared to what I had before

joshiers8605

neat

FryeDaddy

iTrader: (1)

Sick.. Blue Leds? How many does it take to change the whole cluster to led? Also wanna know if the same bulbs for the shift and ac control lights as well? I'm assuming this is a led bulb where u can plug n play instead of stock ones?

joshiers8605

I used whites one in this application and i ordered these leds off of ebay, a pack of 100, I used roughly 80 of them. These came with the free resistors. After I made the mounts, (heated up some thick plexiglass so i could bend it, and mounted that with some strong glue), i put the leds on the mounts, and then used a wall adapter to light them up to make sure i got the position of them just right before reassembly. You can use these same bulbs on the shifter, not sure about the hvac lights. The route most people take is the plug and play bulbs, but they are a lot more expensive, (my setup cost me roughly $6 for the whole thing, considering though I already had the glue). There is a lot of resources on this site to find the bulbs you need to plug and play. i believe a lot of people use the mini wedge bulbs from superbrightleds.com

coreys90iroc

iTrader: (1)

i just got the wled194 bulbs in red. I did my heater conrol and it works, did my shifter and it works and did my mirror and they work. I just tried on the guages and they do not work. Am i missing something? please help.

Chevy86 IROC-Z

iTrader: (17)

Turn your dimmer **** left and right. The LEDs won't dim but rather turn on and off. Try that.

coreys90iroc

iTrader: (1)

i did. all the other ones look great and turn on and off fine. i also tried them agian with the wires pulled from the bulbs and wrapped like they should be on the metal part of the socket. Its a 1990 BTW

coreys90iroc

iTrader: (1)

Got it, guess the cluster wasnt making good contact. idk works good and looks sooo much better now.!

looks pink but thats just the camera. wleds bulbs. I missed a bulb/removed it for the tach so i dont see that cuase the broken tech is annoying thing and doesnt do anything but redline anyways. lol

jchaussee

you should bring it to renton so I can check it out

coreys90iroc

iTrader: (1)

what do you mean? i live in renton. what did you wanna check out? lol

jchaussee

I thought you was in kent. I wanna see what the leds look like in person. never seen. only in pics

coreys90iroc

iTrader: (1)

well im like on the border went to KSD lol, if you want i can meet up tonight i gotta get gas anyways.

jchaussee

tonight would be cool, but I haven't even got home yet. but another day would b cool. I am kind of between fairwood and the highlands

coreys90iroc

iTrader: (1)

im right near fairwood. Im up pretty much all night ill inbox ya my number.

Steveh4263

iTrader: (1)

Anyone try the LED bulbs in a car with a digital dash? The orange or yellow speedometer on my GTA's digital dash is hard to read when the sun hits it. I wonder what a blue led would do back lighting it?

89RS_82Z

iTrader: (2)

digital? thats a LCD IIRC

Steveh4263

iTrader: (1)

Yeah your it is LCD. I wonder what LED bulbs would look like in a 87 GTA with a LCD Digital Dash? Anyone try this out? I'm thinking the outcome would be bad?

DBLTKE

iTrader: (1)

Um, that's not possible. LCD stands for Liquid Crystal Display. Which is how the numbers/letters are projected. LED stands for Light Emmiting Diode. And again, it is the source of light. You can't have both.

Steveh4263

iTrader: (1)

I meant changing the dash light bulbs to LED.

mickeypatches

i want to do this in mine, what color should i go with? i was planning on red bc the car is red, but my dad and brother said go with blue. what do yall think

Chevy86 IROC-Z

iTrader: (17)

I was thinking about switching my blue LEDs. They are nice. Not too bright and not too dim. I want to change to white, but there is no way to dim the light unless you purchase extra parts.

Dabesiv

iTrader: (1)

IMO id say red, i have red all over the car, the dome light isn't as bright as normal but the dash looks great in red, its easy on the eyes at night and yet still very visible

86_irocz-28

Mine dim im using wledx6's that replace 161 size bulbs from superbrightleds heres a pic of them turned up all the way up, only have one in at the moment

Swigbeast

If you don't mind, could you tell me which led's you bought? I'm assuming they're not the wedge type. Your dash looks great, simple and effective, so I was hoping to do a mod like that myself. I've read what you wrote, but I'm still a bit confused. Are they dimmable?
Thanks. I've got my dash out now and I'd give my left arm for them to look like that. :]

coreys90iroc

iTrader: (1)

http://www.youtube.com/watch?v=EWgGVwbIWvg

heres the lights in action lol

Swigbeast

Those look great. I cant wait to get mine in. I'm still bummed that they aren't dimmable, that would be great if they were.

tstak

Has anyone purchased white LEDS and re-used the orange slip covers? Well I ordered "WLED-x5: 5 LED T10 Wide Angle Wedge Base Bulb" in natural white and will do just that. If it all works well and looks like factory lighting with a bright, crisp boost I'll post pics with half the gauges LED and half stock bulb before I put it all back together. That should give a good comparison. Restored 100% of the interior from top to bottom this winter and hoping this will only give me a brighter "factory" look.

iosigma

what kind of leds and how many did you use in your 91 cluster?

Spaceboy1980

iTrader: (6)

I used these, four of them:

http://www.superbrightleds.com/morei...edge-base/206/

You also need the sockets for them:

http://www.superbrightleds.com/morei...ocket/704/962/

They are polarized, so check function before you button it all up. Just hold the cluster in place and turn on the parking lamps. I had to rotate half of them myself. Mine do not dim, but my headlight switch is questionable.

Here is what the cluster looks like with those bulbs in it:

Timmie

ofcours they dont dim. a led is either on or off.

Ruckusz28

iTrader: (3)

That looks great! Looks very modern.

G92Bill

Has anyone tried the 6 diode Led Mini wedge 194? I would like to know if its to much for the dash. Any opinions? And also what beam angle should I select if I do go with the 6 diode?

Dabesiv

iTrader: (1)

I have a 6 diode in my HVAC and Shift indicator, tempted to go for the rest of the cluster but honestly the 4 diode works perfectly so it's not really worth the few extra dollars to go up to 6.

Demonic13

iTrader: (-1)

I don't know if anyone answered this here or not. I know the cluster used T10 bulbs. What size are the 3 center bulbs? The 2 Turn signal bulbs and the 1 high beam bulb? Are they T5's? Thanks.

Demonic13

iTrader: (-1)

I am trying to change to LEDs I need to know what kind of bulb the turn signals and the high beam is. Are they T5 or lower like T4 etc? Thanks guys.

Dabesiv

iTrader: (1)

I've never heard of a T5 or T10 bulb, I only know of it as 194 and it should be that for all the bulbs.

Demonic13

iTrader: (-1)

I changed to LEDs and the T10 fit all the cluster sockets. But the Turn signals and high beam lights are very small. I need to know the size. Thank you.

Demonic13

iTrader: (-1)

The 194 are for all the lights in the cluster except the Turn signals and the high beam lights. The 194 can be changed to T10 LEDS. I need to knoe the size of the smaller top bulbs. The Turn signals and the high beam bulbs. What number are they? Thank you So much.

Richboll

I want to come back to this. I like the LED look but not sure if I want to stray from stock. I guess I need to re-read this.

amscova

Just replaced my whole dash, shifter, hvac and floor lights with red LED's. I'd post a picture but I don't have a good enough camera. I love it so much driving at night though, I just want to swap the overhead lights to LED's also. I'm not sure what kind I need. Can anyone give me a link to the best ones or just tell me what size I need?

Demonic13

iTrader: (-1)

I used these: 2 x White 41mm 16 LED SMD SMT Car Festoon Dome Interior Map Light Bulbs Lamp New

See if you can find red.

Dabesiv

iTrader: (1)

Try this for turn signals and high beam, its the same for all 3 and you have a few options. Called a 74, similar wedge base bulb like a 194 but smaller.
http://www.superbrightleds.com/cat/l...11-322--96435/

Demonic13

iTrader: (-1)

Thank you soo much man I placed an order.