Members CamarosPost pictures and information about your Third Gen Sport Coupe, Berlinetta, LT, RS, Z28, and IROC-Z28 Camaros!
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Ok so im about to finally buy some new door panels for my car from 1A and i didnt know there were so many choices. So tell me what yall think are the best looking door panels to put in a camaro.
My interior is Grey headliner and sail panels.
Carpet is going to be grey also
Seats are going to be black
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
__________________
383ci w/ hyper pistons 10:1, Eagle cast crank, PM rods with ARP bolts, Aluminum heads with 190cc intake runners, 3 angle valve job, 2.02/1.6 valves, Edelbrock 7102 Performer RPM Camshaft & Lifters .488/.510 - 234/244 - 117, Edelbrock 7101 Intake with holley 750 DP street HP Carb, Complete MSD ignition 85551 Distributor, 6430 box, blaster coil and 8.5mm wires.
Sponsored Links
Registered users do not see this ad. Click here to register for free!
That's cool you're getting new stuff.I got my door panels @ the JY from a Firebird.They are in exellent condition!
I didn't know about TGO back then LOL..
Black & grey go together.My interior is opp of yours--black carpet//grey seats.
Did you see the thread a member posted w//photos of his new seat covers awhile back?..Silver-grey seats w// black sides--fantastic looking!!
I forget the poster's name but he got them @ 1A also.
Last edited by t-top havoc; 10-20-2009 at 06:48 PM.
Reason: typo
I found these in a junkyard, practically mint in a mid 80s Berlinetta. I added the 1st gen badging myself, they are available on eBay for about $20. Somewhere on TGO there is a thread on how I did it. There is also a thread somewhere by me showing how I restored my door top plastics.
Keep in mind, if you have power windows and you get manual window door panels, you can use the plastic "buttons" that go in the seatbelt casings that cover the seatbelt bolts to plug the manual window holes in the door panels! As you can see this is what I did. Looks factory.
Hey there is nothing wrong with getting interior stuff from Junk Yards. You never know what kind of goodies you can find in a Junk Yard. Its my favorite place to shop, cause i always save a ton of money.
__________________ "Speed has never killed anyone, suddenly becoming stationary... that’s what gets you.”-Jeremy Clarkson ,TopGear
I found these in a junkyard, practically mint in a mid 80s Berlinetta. I added the 1st gen badging myself, they are available on eBay for about $20. Somewhere on TGO there is a thread on how I did it. There is also a thread somewhere by me showing how I restored my door top plastics.
Keep in mind, if you have power windows and you get manual window door panels, you can use the plastic "buttons" that go in the seatbelt casings that cover the seatbelt bolts to plug the manual window holes in the door panels! As you can see this is what I did. Looks factory.
I hope these give you some ideas or inspiration.
WOW is all i can say. UR stuff looks amazing. Can you get thoes door panels reproduction, like from 1Aauto.com? And what seats are thoes? Your stuff goes together great!
I believe they used the original panels as a template. Everything but the plastic bit on top of the door panel was re-done. It's kind of har to remember since I had the discussion. Basically, everyting in the interior was replaced but a few pieces on the dash and rear area pieces.
I hope this helps.
Tommy
__________________
'89 IROC-Z, full resto, 5.7TPI, BorgWarner 5 speed
'06 Z06 600hp Katech race prepped
'01 C5 Coupe show car
