Copchaser

iTrader: (2)

That looks nice kiddo... That is gonna be sick in certain angles of sunlight. Nice choice!

TraviZ

iTrader: (2)

Thanks. I need all the confidence I can get. I hope the body comes out sharp now I have timed to learn how to adjust the guns and myself to using them. It is looking real good in person, the metallic really pops. I cant wait till its all dry and I cut it down real smooth like glass. The good thing about this metallic red is it hides blemishes real well, so its great for a beginner like myself!

enragedyouth85

Car is looking nice man! I like the red.

UnderCover89TBI

iTrader: (25)

Yup I dont blame ya Trav...a good paint job is expensive

OUTATIME GTA

iTrader: (2)

It won't be perfect, but you can say that you did it and that's quite an accomplishment! Lookin' fwd to seeing the final product.

EvilCartman

iTrader: (1)

I sure hope you don't get panels looking different since you're spraying it bit by bit. The metallic will lay different in different temperatures and gun settings.

TraviZ

iTrader: (2)

i did all the gfx and spoiler at my house along withthe hood. the while body of the car gets done this wednesday

UnderCover89TBI

iTrader: (25)

that is a good point Cartman..but it will look decent either way

STEWARDORNG

Good work Trav you are braver than I, I suck at painting!

UnderCover89TBI

iTrader: (25)

gotta use a different tip for the base coat and clear coat, then ya gotta wetsand, really should wetsand between base and clear, buff...its a job! I dont wanan do that ****!

vistageek92

iTrader: (2)

That is simply gorgeous. Proof that you don't always have to pay a shop to do it! Just take patience

Painted mine myself too. Welcome to the club!

UnderCover89TBI

iTrader: (25)

that looks pretty darn good. Mine is a 10 year old garage paint job, of course if you see it inperson the car looks worse, but its looks good from far, but far from good looking

TraviZ

iTrader: (2)

I have 2 guns, one for the primer, and one for base/clear. my paint cans suggested the same size tip for base/clear so im using same gun for that.

I did not buff or sand before the clear as it was advised against doing that by multiple research sites and manufacture-of-paint recommendations.

I will need to sand/buff the clear. Im afraid of that part, I hear 2k then 3k wet on the clear followed by a polishing compound on a buffer does the trick. anyone have more input on this?

TraviZ

iTrader: (2)

Here is today's progress.

TraviZ

iTrader: (2)

A couple more.

UnderCover89TBI

iTrader: (25)

what kind of primer did you use? does the car have any epoxy primer on it?

TraviZ

iTrader: (2)

it had some left over self etching rattle can on it that i scuffed up and i used i think its called 2k?

UnderCover89TBI

iTrader: (25)

? eh I dunno. It will come out good though.

vistageek92

iTrader: (2)

I started with 1k went to 1.5, then 2 then 3k. You'll understand why when you start trying to start off with 2k. It'll take forever. But that depend on how smooth you want it.

Now I had my car professionally buffed. I didn't want to try to do that. To much chance for error and ruining a good paint job. It was worth the $300 in my eyes.

vistageek92

iTrader: (2)

I've used 2k before. It's good.

EvilCartman

iTrader: (1)

Can't wetsand a metallic base, it'll look funky unless you dust on another coat to get everything looking even again. I've never had to do it, never have seen anyone else do it. The clear for the paint system I use is ready to go on about the time I have the gun cleaned, the clear mixed and ready to pour in the cup.

UnderCover89TBI

iTrader: (25)

yeah ive never used a metallic either

TraviZ

iTrader: (2)

That explains why it was recommended to NOT sand the base.

UnderCover89TBI

iTrader: (25)

Yes that does. good thing you follow directions

enragedyouth85

Want to paint my car for free? Well I guess I will buy you a case of beer...

OUTATIME GTA

iTrader: (2)

He's kidding, right?

Roughly how many hours of prep and how much were the materials/paint thus far Travis?

UnderCover89TBI

iTrader: (25)

Ray is joking! of course.

An old high school friend of mine runs a paint shop in Stockton now, I am going to see some of his work soon. That'll be my next paint source. (or maybe just rent his boothe) I will see

TraviZ

iTrader: (2)

UnderCover89TBI

iTrader: (25)

you better not have gotten any overspray on my rims man haha she looks good but pictures only tell so much! we will knitpick it at our next GTG

FSTFBDY

iTrader: (33)

looking good. Just the camera or do you have lots of orange peel on that fender o sand out and polish?

Im gonna miss the ol primer, red , black Car. Id say it looked like the typical MEAN BAD *** , sounding 3rdgen..

now its just a nice , quick 3rdgen..lol. either way looking good man.

TraviZ

iTrader: (2)

Lots of orangepeel, yes. I will have to learn to get that out. Paint jobs not perfect but its better then primer. My first coat had some runs in it which pissed me off, almost made me give up. I sanded them out the best I could then proceeded to paint. I did not have enough materials to go back to primer and start over.
In time, I will get around to ordering more paint and doing some touch up.
The hood needs to be redone, I will probably do that next week.

UnderCover89TBI

iTrader: (25)

is the orange peel in the base or in the clear?

TraviZ

iTrader: (2)

clear

enragedyouth85

Of course I'm kidding!

UnderCover89TBI

iTrader: (25)

im sure you'll be able to get a lot of it out. I mean worst case scenario. you have a car with some orange peel with a 383 stroker supercharged

EvilCartman

iTrader: (1)

If there's enough clear on it, he'll be able to get it all out and look like glass Kinda looks like mine did when I used the wrong hardener, was a hot freakin day and the clear didn't flow out. Cleared some other parts on a nice cool night and didn't even have to buff the parts out everything came out so nice.

dspencer24

iTrader: (3)

Looks great man!! Now you just need to cut and polish it .

UnderCover89TBI

iTrader: (25)

Then he has to beg the guy with the camera to take a still motion picture shot of him going down the track

TraviZ

iTrader: (2)

Oh yea, I need updated sig photos!

Duane's 91 Z/28

iTrader: (1)

Your car looks awesome Travis!! Great job. I hope that I'll be able to make my car as nice as yours.

TraviZ

iTrader: (2)

I am honored to be an inspiration to others out there, I did all this work myself, whether its perfect or not, I know its mine, it can be perfected upon, it only takes practice. you can do it to, it only takes motivation and inspiration to do it, the end result is so much more then handing over cash and seeing results. Watch "love the beast" and you will understand it even more.

OUTATIME GTA

iTrader: (2)

Nice job. That short stint in the body shop you did paid off. Not everyone's had that pleasure. I'll gladly hand over cash, haa.

I think the black ZR1 rims you had would've looked good with it too.

UnderCover89TBI

iTrader: (25)

That would have been awesome

TraviZ

iTrader: (2)

Give me a few to upload a finished pic with the gfx. the wheels look baller.

TraviZ

iTrader: (2)

With gfx, looks sharp.
Now I need to clean those wheels and black out that rubber.

TraviZ

iTrader: (2)

I am going to repaint the hood next week, it doesnt pop as well as the rest of the car. I messed up on the primer process. Now I know how to fix it the second time around.
Also in time I think I want to go back and re do the drivers door, and other various touch ups. In person you will see why.

OUTATIME GTA

iTrader: (2)

Much better with the FX. I'm sure from 20ft, the paint looks sweet.

Nix that tan interior for the black and it'll be even better.

Always nice to see your pride in the 3rd gen.

3rdBird

iTrader: (1)

Looks good. I had Maaco paint mine a couple months ago, it looks great, it has some orange peel on it too, but I say no one sees orange peel at 150.

SiCkRs

iTrader: (6)

I love how it came out im also thinking of painting mine myself but afraid ill get bad results cant you still wet sand it and make it look smooth?

UnderCover89TBI

iTrader: (25)

Yeah my paint job was never perfect either but for me a daily driver i never wanted a 5k paint job.

its look pretty good. I can see what your talking about in the photos. Still way better than primer.