onebinky

iTrader: (1)

Well, with working 60+ hours a week, and student loans, mortgage, wedding, etc to save for, I don't really have the time or money to play with my car anymore. I sat down and started to think about all I have into it, and it seems that it's worth more in parts than it is whole. So I'm going to start pulling easy parts off over the next week, and if weather is nice next weekend I'm gonna tear the whole thing down to the skeleton. Here's a list of the performance parts I can think of off the top of my head. I'm sure I'll think of more as time goes by. I'll put up seperate threads for interior, exterior, and suspension.

SOLD-walbro 255gph in tank pump $50

SOLD-hooker 3" catback exhaust, with pipe in cat's place $110

SOLD-hedman 2 5/8" shorty headers with ball flanges $80

SOLD-hedman y-pipe with ball flanges and o2 bung $40

SOLD-T5 conversion package, includes: WC T5 rebuilt 40,000 miles ago, centerforce dual friction clutch (6000 miles old), pedals, hydraulics, resurfaced flywheel when clutch was installed $500

-edelbrock vic jr converted to port fuel injection $150

-holley 2bbl TB with shaved injector pods $50

-Edelbrock fuel rails, 9/16" ID $50

SOLD-summit 8mm plug wires, custom length for hedman shorties $20

SOLD-small cap HEI distributor $10
-aluminum plug wire looms $20

SOLD-Holley annihilator ignition box $100

SOLD-Holley annihilator ignition coil $30

SOLD-accel cap and rotor, 4000 miles old $10

-comp cams grind 08-300-8: specs at .050" lift
intake lift at valve .450"
exhaust lift at valve .480"
LSA 112
intake duration 206 deg
exhaust duration 210 deg
no advance or retard ground in to cam $100

-engine bottom end, very recent rebuilt 305 .040" over
speed pro hypereutectic pistons, good for about 9.1:1 compression
clevite main and rod bearings
blueprinted
stock rods machined and pressed on pistons by machine shop
clevite cam bearings
oil pan from 2002 pickup with vortec 350
speedpro rings
I realize the 305 isn't a popular engine, so I'm not asking a lot for it. $350

SOLD-cast aluminum timing chain cover $20

SOLD-cast aluminum chevrolet valve covers, regular height $80

SOLD-World Products SR Torquer 305 heads, full port on intake side, exhaust side full port and polish, lunati stainless valves 1.94 intake, 1.50 exhaust, comp cams springs good for over 6000 RPM (don't remember exact spring PSI), comp cams spring retainers, threaded rocker studs, 3 angle valve job $350

SOLD-Billet dipstick

SOLD-March Billet underdrive pulleys for waterpump, crank, and alternator. Got em used, they fit with my 87 IROC bracketry. should fit others. $75

-mallory AFPR 0-100psi $70

-LS1 fuel injectors, purchased new last summer $75

SOLD-GM 10 bolt limited slip diff, 7.5" ring gear, 3.23 gears, set up for disk brakes. Rebuilt 5000 miles ago with new carrier bearings, axle bearings, axle seals, and pinion seals. Inspected carrier assy and clutches, and checked wear pattern. I had 4.10 gears in it for a short while, but they were to much for the street. Bearings and seals are all Timken. IIRC, I used castrol 80w90 oil with GM limited slip additive. Stamped steel diff cover from 2002 trans am. This rear is silent and leak free. $150

EDIT:
-7730 PCM modified for chip burning $50

SOLD-four at29c256 EEPROMS $20

SOLD-7730 engine harness modified and cleaned up. All emissions plugs removed, very clean. Any wires that were modified were soldered and heat shrinked, or soldered and wrapped with high quality 3m tape. All new black wire loom. $100

SOLD-Pocket programmer II, two years old. $50

-Dell 2ghz laptop. 128meg ram, 60gb hard drive. 3 USB ports. 3 months old. $500

I also have a few feet of braided stainless -8an and -6an, as well as an assortment of fittings. Swivel and fixed. Let me know what you need, they are all reusable fittings.

-New Bosch water pump. Installed about a month ago. $20

-I rebuilt the stock alternator last fall with new rectifier, diode trio, regulator, and bearings. $20

SOLD-Newer starter, for 1992 305 with the manual trans. It has a smaller body than the automatic one. $20.

In case there is a demand for certain items, please post here to get in line for them instead of just sending email or PM. It'll keep things much less complicated.

I have pics of everything.

86Z

iTrader: (4)

i want the pocket programmer, let me know shipping to vernon, ct 06066

also what is modified on the 7730 ecm? does it include a memcal? if so what one?

onebinky

iTrader: (1)

Just the Memcal is modified. It was a 6cyl memcal originally. It has since been removed and a ZIF socket soldered in it's place. Memcal is included. I have 4 or 5 atmel at29c256 EEPROMS that go with it as well. I'll have shipping quote shortly.

onebinky

iTrader: (1)

$9.27 shipped UPS ground. I have paypal, or I can take money order.

dakleenupman

You have any -4AN to 1/8 male NPT fittings?

onebinky

iTrader: (1)

Nothing that small, sorry. Depending on where you are in illinois, there is a small performance shop in downtown Joliet by the name of Winner's Circle. They carry a huge stock of plumbing supplies.

dakleenupman

Thanks, is that where you are at?

onebinky

iTrader: (1)

I'm in a small town just south of Joliet. Channahon, if you're familiar with the area.

86Z

iTrader: (4)

i'll just take the pocket programmer, whats your paypal address?

dakleenupman

No but I am sure I can find it.

onebinky

iTrader: (1)

quiktrp@cbcast.com

Thanks

TheBandit

the hooker exhaust.. what would be shipping to 08859?

onebinky

iTrader: (1)

It looks like if I seperate it into 3 pieces, it would be $43.82. The I-pipe, the muffler and tailpipes, and the over-axle section.

young82z28

I will take the exhaust if not yet takin. I live in the chicago suburbs and could pick it up. Darrell

onebinky

iTrader: (1)

For something of that size, I would much rather do local pickup than ship. I'll wait and see what thebandit wants to do though so I don't snub him

deadhead1882

ill take the headers and ypipe, shipping to 85364

*edit*
ill possibly take the heads also if there not already spoken for
2nd edit
ill be stingy and take that pocket programmer aswell if youve still got it

brewer

how much shipped to 41230 for the

headers

justlearning

if the pocket programmer deal falls through i will deff. take it if u have the book for it pm me and let me know

justlearning

subframe conntectors, lca, strut tower for tbi???thanks
john
spanky00185@yahoo.com

onebinky

iTrader: (1)

You're next in line for the headers and Y-pipe, nobody has mentioned the heads yet so you have dibs on those. I shipped a set of iron heads out west a couple years ago, and shipping was $95 for the pair. If you want the heads for sure, let me know and I will mark them as "sale pending".

Pocket programmer is gone already

onebinky

iTrader: (1)

No SFC's, no STB, but I do have the front LCA's.

deadhead1882

pm sent

*edit*

do the headers have the air tubes

onebinky

iTrader: (1)

No air tubes on the headers. We are one of the remaining counties in Illinois that doesn't have to worry about emissions (yet).
_______________________
Also, the response I have been getting on these threads is incredible. I will do my best to keep it on a first come, first served basis. It seems like it's going to be difficult with the amount of replies, PM's, and emails I have been getting.

If you want something, please do like some of the folks have been doing and make a solid offer on price and inquire on shipping. If it's something I can guess shipping on, I'll take payment and ship it as soon as it's off the car. If it's to large or bulky to guess size and weight, it will have to wait until it's off the car.

Thanks ahead of time guys

Also, I wanted to mention that I have a very solid EBay feedback rarting under user ID "quiktrp", and also have a 100% satisfaction rating with paypal. I have also done quite a bit of buisness on the boards here. There will be no worries

deadhead1882

pm sent

onebinky

iTrader: (1)

here's the best pic I could find of the headers. I'll dig for a Y-pipe shot.

batman40oz

is your car tbi? if so, how much for the intake manifold? also is your rear end posi?

onebinky

iTrader: (1)

It's port fuel injection. The rear end is 3.23 limited slip (posi)

Steve86sportcoupe

what condition are your rear springs and shocks in ?

price shipped to 98373?

onebinky

iTrader: (1)

Excellent as far as I can tell. Keep in mind though that the IROC rides about 1" lower than a standard camaro if I remember right. May want to search on it, and if it turns out to be true you'd need the front springs too.

Shipping is $35.

plathegame

does the car have an ignition box by any chance?

onebinky

iTrader: (1)

Yes, it's a holley annihilator ignition box, which is a capacitive discharge type. I have it listed above, along with some other ignition parts.

Steve86sportcoupe

ok so springs front and rear price shipped

onebinky

iTrader: (1)

front/rear springs $30
rear bilstein shocks $50
shipping $39
total $119

If you want all of it I can do $105 shipped.

robert1

iTrader: (3)

Can I get a pic of the starter, offset or inline holes, and a pic of the timing cover? Thanks

onebinky

iTrader: (1)

Those are going to be hard ones to get pics of until I get them off the car. All the pics I have the cover is shrouded by the waterpump.

It's this one though:

The starter's intended app is 92 chevrolet camaro TBI 305 with the T5 manual trans. The block it is currently on is a 96 305 truck block with 2 bolt mains. I'd say they were inline bolts, but I'd be guessing.

plathegame

sorry i looked right past it on the list ... my fault

robert1

iTrader: (3)

Do you have about 6 - 8 feet of the 6 AN? How about two 6 AN 45 degree fittings also? Thanks

92ss wagon

any chance the Walbro would fit a Caprice?? Thanks

justlearning

is that your car in the pic w/ the open element if so i know u had to have a cowl hood or somethin for clearance if so how much for it if its for sale

TheBandit

umm i hope your not waitin on me for the exhuast.. i was just curious to see the shipping.. seems liek too much of a hassle.. if you havent already sold it i dont want you to hold it for me whens theres people who want it

crewguy

still have the valve covers?

onebinky

iTrader: (1)

Yep, you want them?

AutoX86Z28

can i get some pics of the rear end?

if they need to be emailed, brown3333@sbcglobal.net

onebinky

iTrader: (1)

Thanks for letting me know bandit. Young 82Z28, the exhaust is yours if you want it.

onebinky

iTrader: (1)

It's a monsterous cobra II style scoop on a stock steel hood.

I have another thread going with all the exterior and interior listed. I have the price listed in there as well as the rest of those kinda parts. Let me know if you want it.

Matt

olong_us

Still got the timing cover if so ill take it. Thanks Alex

onebinky

iTrader: (1)

I couldn't tell you that one. I do know that GM used a common pump for alot of the 80's cars. Maybe you'll get lucky

onebinky

iTrader: (1)

You got it. What's your zipcode? I'll get you a shipping quote on it.

Camarothatcould

iTrader: (3)

What pound are the injectors? I need 24's for my 350 TPI

onebinky

iTrader: (1)

They are rated by gm as 28lb injectors, but that is at nearly 60psi. At 38-42 psi they are in the 24-26psi range.