vernw

Wanna Baby LT1 real cheap? LOL

aldixie

Wanted

Set of headers with A.I.R and Y pipe. Trying to get a pair for this weekend to do the TPI swap on my dead car.

Anyone have any in the Houston area?

Thanks,

Alex

edman87k5

Selling or parting out a 86 z28. Body is nice, no rust! 1 scrape on pass door, otherwise minty body. I do plan on swapping the drivers door with a dented 1. All ground effects good except under-door on pass side. Was a 305tpi auto car. No motor or trans, I do have the 305 shortblock minus cam with good bores and no ridge. Complete tpi setup avail. - wiring, comp, intake etc. Interior is mostly apart. No taillights, grill or wheels- going to put somthing back on to roll around yard. I will also be swapping the disc rear with a drum rear. Great for body swap from your wreck or rusty car. Clear LA title. Located above baton rouge, LA. Will sell complete or part out. Pm me for any wants.

aldixie

Hi Guy's

Have the following parts left over from a conversion that I have just done.

92 Z28 speed density harness with computer from 305 with T5 transmission. Harness is perfect. SOLD
91 RS TBI inlet manifold with TBI unit, Remanufactured ECM from AC DELCO fitted with superchip for 305 TBI/ 700R4. $150

Pair of headers for Camaro, no air tubes or T pipe, can't see a make on them. $50

91 305 Longblock, has blown head gasket, ideal for rebuild. $200.

Phone 281 478 6199 or 281 382 0025 Cell.

Parts are in Deer Park.

aldixie

Gone

Rainman

i finished swaping in my moser 12 bolt and now i have a broke 9 bolt layin around. here is the scoop:

Borg Warner 9 Bolt. 3.27 gears. no brakes. has one and a half control arms on it plus a panhard bar.

somehow i broke the bolts that hold the ring gear to the posi unit. if anyone is interested ill take 40 bucks for it. i will even trow in a couple trash bags so you dont get your car dirty!

RSInstaller

I've got a Pontiac Dash Pad in great condition. I just re-wrapped the speaker grills with new grill cloth. There are two small cracks in the defroster vent that face away from the driver (can only be seen when looking in through the windshield). Also there is a small piece of vinyl missing from the passenger side, but is hidden by the windshield once installed. I'm asking $80 which is exactly what I paid for it. Pictures are attached below.

Other items:

Rear seat belt assemblies (black, driver and pass. side, lap belts, no receivers) $10

Driver and Passenger glass T-Tops (they are not the same size or design and I'm not sure what year/make/model third gen they will fit). $25 each

Items for sale from my 91 Camaro RS:

Complete set of rear seats (red, bottoms and split backs). They are in excellent condition with little to no fading. $40

Front and rear seat belt assemblies (red, rear shoulder harnesses, driver and pass. side, no receivers). $20

Complete carpet set (red, passenger and cargo area). Needs to be cleaned, but is in restorable condition. $60

I'm located in Denton County off of FM407. PM me for pictures and/or pickup details if you're interested in anything above. I think I've priced everything fairly, but feel free to negotiate or offer a trade. Thanks! -Darren

Attached Images

	100_2405.JPG (630.7 KB, 42 views)
	100_2406.JPG (787.4 KB, 32 views)
	100_2407.JPG (655.9 KB, 25 views)

3.1EyeCandy

No longer available.

LilHot

Parts for Sale:

AJE tubalur K-member NEVER INSTALLED (new)- $400
Flowmaster Y- Collector PT#FLO-Y250300 2-1/2" Pri, 3" Collector (new, never installed)- $35
L98 Stock roller cam and springs, not sure on the specs (used)- $30
86 Iroc hood NO inserts, decent shape need paint $50 obo.
A set of long tube Hedman headers $85. SOLD

I live in Rosenberg but work in Houston (Springbranch Area). PM me if you need pictures or if you have questions.

3.1EyeCandy

Looking to sell a 4th gen console with manual top plate modified for use with a thirdgen firebird. 4th gen console is in 8/10 shape. PM Me. Houston sale only. See pics:

Red92RS

...

slo86z

do u still have the hood?

blackgold84

i live in richardson
send a p.m.

for sale

-1984 10 bolt, 3.23, open diff, drums, 26 spline axles will part out, come get it for free
-1984 10 bolt, 3.73 richmounds, zexel torsen take out unit, 28 spline, relocate brakets, lpw cover, welded tubes, new seals, alum drums, 4k miles, still has ebrake cables on it (make offer)can shipped dont want to tho...
-spohn rear sway bar, chromoley, 1", with hardware for 10 bolt tubes, good condition (100$ shipped)
-bmr? stb 4th gen (75$ shipped)
-red tubular lcas, grasable poly bushings, most likely bmr? (85$ shipped)
-infinity reference, 12", svc, 4ohm, good used condition (50$ shipped)
-mdf, unfinished sub box for the 12" sub above, with wires to amp, 1 cubic ft +\- speaker, cube (35$ shipped)
-polk momo, 12", svc, 4 ohm, 4 mo. used (75$ shipped)
-carpeted, mdf, 12", slant face box, with wires to amp, +\- 1.2cubic ft (45$ shipped)


got no cash want to trade, i've got a list of parts ill take

-good t56 clutch amd presure plate
-t56 bellhousing
-4.10 gears & 31 spline posi\locker for my 9", has a 3.73 and spool in it, can trade off
-3" aluminum driveshaft
-nice pair of lighty used or new 6x9s
-t56 swap crossmember
-slicks, for 16" irocs
-new or almost new, 4th gen clutch hydrolics, early style
-cowl hood, i have an '84

Ricco

I have a set of 16" 91-92 Z28 rims that i want to swap for the late style 16" IROC rims.. Let me know what you have got.

Cheers,
Richard.

Lucid

On good idea on swapmeet

Items Wanted:
- 700R4 or 4L60 Transmission (later model preferred)
-Passenger side fender with no dings
-Black Door Panels


Items selling:
-Original 15x7 Z28 wheels grey with BF Goodrich Euro T/A tires and new center caps - $250 OBO

1fas92

parts & a V1-S TRIM FOR SALE

--------------------------------------------------------------------------------

I am looking at selling my Vortech v1 s-trim as a kit. It has a everything BUT the msd 6al btm box. I would like to sell the complete bracket with the alternator, power steering, and supercharger as one piece in exchange for your stock bracket. it also has a custom air intake for the supercharger with a 10 inch k&n filter,& the fmu.. Also i have a 18 x 12 x 3 inter cooler, 3 in 3 out, as part of the kit, But not all of the plumbing for that part(intercooler).
$2000.00 or best offer.......................... LOCAL SALE, i will help with the install if necessary.........................for the same price for the selling price that we agree on................

THE SUPERCHARGER HAS ONLY 1000-1500 MILES ON IT SINCE IT WENT TO VORTECH TO HAVE NEW BEARINGS & TO TO BE CHECK OUT BEFORE I PUT IT ON THE NEW MOTOR.........................

Long tube headers Super comp 2210's $300.00 or best offer............
the are not powder coated or anything, i painted them with high temp paint, BUT it didn't last long.................


I CAN'T/WON'T SELL THE HEADERS UNTIL THE SUPERCHARGER SELLS.....................



I AM GOING TO PUT A TURBO ON THE CAMARO................



Thanks,
Robbie Sheffield
1fas92
robbiesheffield@yahoo.com

ZONES89RS

Trade, looking for a hard top, 82 TA 305 CFI, looking for a 85-90 TA, needing work ok. 82 needs paint and minor cosmetics.

Traded for 85 TA

DONE DEAL

__________________

Built Not Bought

www.fquick.com/zones89rs

yevgenievich

3.1EyeCandy,
is the 4th gen console still available? is it going to work with 700r4? is it pretty much a direct swap?

Selling:
used TPS sensor, worked fine when took it off $20 OBO

Lucid

Anyone selling a headliner near san antonio?

Also looking for a 700r4 shifter cable if anyone has an extra one.

Stephen

What color headliner? My Beechwood Tan one from the 89 GTA is still available, as well as LOTS of parts from it.

__________________

17"x9" ROH Snypers (with the correct 3rd gen backspacing, no spacers needed), 275 front/285 rear, no rear seats, 4th gen front seats, OEM 2001 TA rear wing, OEM 1997 TA side mirrors

Home of the STS (Sequential Turn Signal) mod
Photobucket of 1989 Pontiac Trans Am GTA-parting out
GOD Bless America

Lucid

I really wanted a red or black one to match the interior that it has.

How much are you asking for the tan headliner? Pictures?

Stephen

$20? I need it outta the way really. I'd prefer not to ship, but I could meet you in S. Austin with it.

No pic, but I can try to get one today. I'll actually be near Kyle today, and could bring it, but I'm heading out at 8am (a hour from now) so the chances of you seeing this, deciding, and responding in time are pretty low.

__________________

17"x9" ROH Snypers (with the correct 3rd gen backspacing, no spacers needed), 275 front/285 rear, no rear seats, 4th gen front seats, OEM 2001 TA rear wing, OEM 1997 TA side mirrors

Home of the STS (Sequential Turn Signal) mod
Photobucket of 1989 Pontiac Trans Am GTA-parting out
GOD Bless America

Lucid

PM Sent

Lucid

Anyone looking for a front bumper assembly?

Includes the headlights and brackets, parking lamps, front bumper and lower valance, and the front bumper itself. I can add the front crash bumper for a little more.

Asking $150 obo

Pictures:

bowtienick

i tried to edit my other post , but couldn't
here is a list of parts i have for sale, decided to build up a 6.0 ls1 instead,

-350 4 bolt mains, .060 over , 9.010 deck, $500
-350 steel crank 3.5 stroke, $450
-scat 6.0 inch rods, $250
-probe pistons,4.060 bore, 6.0 rods, 9.8cc dish, $400
-milodon oil pan and pick up, melling oil pump, windage tray, all $200
-crower pro street cam #00321, 242/248 dur., .482/.504 lift,
complete kit, $150
- 1 head, zz4, $250
again interested parties can reach me at 281-970-6558, or email bowtienick@yahoo.com

Lucid

For sale:

Also for sale is a complete interior plastics set in grey taken out of an IROC camaro
I was going to swap interior pieces but I want to keep the original red IROC interior.
The door panels, headliner, and speaker sail panels are not included.

Includes: rear hatch motor cover, two side rear side panels, two front kick panels (not pictured), door sill trim, headliner retainer, some other panel and anything in the picture that i dont know the name of. These panels could use a good cleaning. One of the kick panels was painted black but can be paint thinnered back to grey.

Pictures:






Asking $120 for ALL pieces together

BadAz_Iroc

I am in the process of coverting to manual i would like that pedal & hydrualics assy. I am located in houston, hit me back if you still have it.
1.An almost perfect dual-snorkel air-cleaner set-up,$150
2. everything from the manual trans (hydraulics) and pedal assy. $100.00
3.stock fuel line cooler,$25
5.K&N 7" air cleaner, 5$
4.3 sets of grey door jamb covers, $30.set
5. brand new Edelbrock Performer Vortec manifold (us