parts for sale
11-23-2011, 07:55 AM
#1
Junior Member
Thread Starter
Join Date: Jul 2006
Location: Amarillo,Tx
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro RS
Engine: turbo 5.3
Transmission: th400 with 3500 stall
Axle/Gears: 3.42
parts for sale
i have some parts i am tryin to sell off my old engine , there is nothing wrong with them but i am swappin to lsx ,
i have 650 dbl pumper 150 obo
350 vortec heads 200 obo
edlebrock intake for vortec 100 obo
oil pan for sbc with oil pump and pickup 100 obo (high volume oil pump)
1.52 self aligin roller rocker arms 150 obo
roller cam and lifters 300 obo , cam is
Basic Operating RPM Range 1,500-5,500
Intake Duration at 050 inch Lift 218
Exhaust Duration at 050 inch Lift 224
Duration at 050 inch Lift 218 int./224 exh.
Advertised Intake Duration 269
Advertised Exhaust Duration 276
Advertised Duration 269 int./276 exh.
Intake Valve Lift with Factory Rocker Arm Ratio 0.495 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio 0.503 in.
Valve Lift with Factory Rocker Arm Ratio 0.495 int./0.503 exh.
Lobe Separation (degrees) 112
Computer-Controlled Compatible No
Grind Number CS XR269HR-12
i have 650 dbl pumper 150 obo
350 vortec heads 200 obo
edlebrock intake for vortec 100 obo
oil pan for sbc with oil pump and pickup 100 obo (high volume oil pump)
1.52 self aligin roller rocker arms 150 obo
roller cam and lifters 300 obo , cam is
Basic Operating RPM Range 1,500-5,500
Intake Duration at 050 inch Lift 218
Exhaust Duration at 050 inch Lift 224
Duration at 050 inch Lift 218 int./224 exh.
Advertised Intake Duration 269
Advertised Exhaust Duration 276
Advertised Duration 269 int./276 exh.
Intake Valve Lift with Factory Rocker Arm Ratio 0.495 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio 0.503 in.
Valve Lift with Factory Rocker Arm Ratio 0.495 int./0.503 exh.
Lobe Separation (degrees) 112
Computer-Controlled Compatible No
Grind Number CS XR269HR-12
Thread
Thread Starter
Forum
Replies
Last Post