sfeeney

iTrader: (1)

okokokokok

i have a good all power drivers side door.

i have that cable for the mirror and i also have power mirrors available

lots of trim and nick nacks

just PM me and tell me what you need

We are about to get another car soon so i will have another set of parts

sfeeney

iTrader: (1)

i have the hood pop assembly including cable..

i have that fuse panel your looking for and mirror cable

i have drivers door and lots other stuff pm with what you need

i am getting another iroc tonight prolly so i will have another set of parts..

IROCFAST

iTrader: (3)

I need an automatic brake pedal assy and a pass IROC taillight

I have a rust free, all power drivers door for sale

I have a mint dash pad for sale also, but I would need your junker to cover the hole.

Arizona IROC

iTrader: (4)

I have the brake pedal assembly $10 No extra tail lens

mecham84

iTrader: (1)

Lookin' for RH and LH fenders for a 82-84 Trans am with air vents. Let me know what you have. e-mail @ mecham84@earthlink.net

TheScaryOne

iTrader: (3)

I need the AIR tube from a 305/350 passenger manifold from 88 or later. If you can't get the AIR tube out, I'll take the manifold too. This is a bit more high priority than my other wants. Thanks in advance!

AZ406TPI

iTrader: (2)

i have a rear hatch/good glass from an 86 iroc. FREE, just come get the damn thing

Arizona IROC

iTrader: (4)

I have a nice one. I was gonna put it on ebay but shipping it would be iffy

$50 ?

drknow90rs_ss@y

iTrader: (3)

That looks like a nice one! If burnout88 does not want it, then I will buy it. burnout88 is first though, because he asked first!

burnout88

I can't believe this. I looked for months for this console and could not find one anywhere that was not in terrible condition. Now one shows up after I just bought a new GM one for $300 bucks. I just freakin bought it last week!!

drknow90rs_ss, thank you for the first crack at it. But since I have a new one now it's all yours!!

Arizona IROC

iTrader: (4)

Oh really,, OK $250!!! j/k

Seriously, I can't believe they still sell those. Sorry I didn't get back to you sooner but I didn't realize this one was so nice because the rest of the interior is trashed. Typical AZ car.

drknow90rs_ss@y

iTrader: (3)

Lol, Ill take it! I hate that when I buy a new part, only to find a really nice used one a week later... pm sent, Arizona IROC.

sfeeney

iTrader: (1)

OK EVERYONE WE JSUT PICKED UP A 87 IROC CAMARO COMPLETE

IT HAS ALL THE GOODIES INCLUDING 145mph dash pad is bad,
THe REST IS ALL THERE
PM ME WITH WHAT YOU NEED

andresinibus

Im looking for two tires for my ride the size its 275-60-15 the cheapest new ones i found are $80 each just wondering if anybody is got a couple of them that are not in bad shape and well cheap thanks

GIJason91

I need a full exhaust including a Y pipe to fit up to my flow tech shorty headers or if you got headers on the exhuast already you wanna get rid of let me know looking for performance exhaust but will take something stock if its cheap. im in tucson AZ

drknow90rs_ss@y

iTrader: (3)

You never got back to me on weather you wanted it or not.... Did you get the video msg/ sound clip?

GIJason91

never got a video clip if it needs to be shipped thats probly why sorry i didnt get back to you it just about doubles the cost just to ship it id like to find something local. i had a buncha people showing me different set ups sorry i didnt get back to you.

drknow90rs_ss@y

iTrader: (3)

Thats ok, I checked on the setup; Muffler is made by thrush and intermediate pipe is 3"...

hart7631

need: trans am parts.

• wrap around spoiler in good condition

drknow90rs_ss@y

iTrader: (3)

I have a 4thgen T/A wraparound. It's maroon and includes the third brakelight. (This is the highrise) It will take some modding to make it fit. There are some threads in the body section on making these fit.... I also have a 4thgen T/A 6 spd center console in black, but I think I'm using this one.. I paid too much for it anyways...

TonyC

iTrader: (1)

I have a console out of a 95 Firebird, the shift plate is for an automatic though. $30 if you want it

sfeeney

iTrader: (1)

how much did you pay jason????
for that console..

i found one for 75

drknow90rs_ss@y

iTrader: (3)

LOL, a lot more than 75! Its almost immaculate, car was crashed with only 9000 mi on clock. 75 is a good deal if its in really nice cond.

ChainHartMachin

I need the following (as of right now)

One 16" x 8" grey formula (salad shooter) style wheel. Oh yeah it needs to be a front wheel.

A dual electric cooling fan upper radiator support bracket.

A black firebird front bumper skin that is some style other than the 92 "banshee" style.

An 90's firebird steering wheel w/ airbag module.

ChainHartMachin

I need a passenger side header from the hedman 68460 part # (full length) headers (mine's broken by the crash).

fryer1979

sfeeney, I need the panel that covers the hatch hinges above the drivers seat, and the panel that covers the tail light assemblies and hatch latch if you still have yours and they are in good condition. I also need sunvisors if you have them. Color is not a huge issue, I have black dye. Let me know if you still have them and price plus shipping to nor-cal and we will go from there. PM is fine if you prefer, thank you.

sfeeney

iTrader: (1)

i have both those pieces in real black i believe and i also have a set of nice
black sun visors so ya i have what you got..

call me 520 490 1726 and lets talk ..

ffemtm70

I need new seats...black preferably

dash pad in good condition

new rims/tires

hatch and hood struts that work

window switches

that pull down motor thingy for the back deck

front nose............

EVERYTHING!!! lol

ChainHartMachin

I've got some black rear seats and a pretty good front passenger seat. I can send pics in a day or two

Twin_Turbo

iTrader: (25)

I need black console carpet in good condition

ffemtm70

sorry i am just getting back to you....but do you still have the seats? If so can I get some pics. You can post them here or you can email them to me at jjketchie@yahoo.com

BluFBdy

iTrader: (1)

hey sean im lookin for a motor, i figured id see what you have just basic 350 tpi with the harness and ecm if possible preferrably running

let me know got $400 back from my financial aid and im ready to blow it lol

ffemtm70

I need 2 inch adaptors for my rims....I am getting rid of the stock 15's and going with a set of C5 rims.

old Phart

iTrader: (1)

I need a perfect, no dents at all, 89 IROC hood, with or without louvers. My original hood has many "unfixable' little dents in hard to get areas. Even "Dent Pro" couldn't get 'em out! Drives me crazy looking at them when I clean my car.

TheScaryOne

iTrader: (3)

I've got 4 C5 Wheels for sale with tires. They're all 18 x 9.5", and the fronts are 245/40/18, and the rears are 275/35/18. They come with three new Fuzion ZRi's ($400 without shipping). Both of the mounted front tires are BRAND NEW, and it comes with one extra front tire. Both of the rears are at the treadwear bars, and need to be replaced. The IROC went from DD to Project, and I decided I don't want to put the C5's on it.

They've got a bit of curbrash all around the outside of three of the four wheels, and the fourth has a little curbrash. They're chrome, which makes this a giant PITA, but most sand blasting shops should be able to blast off the chrome (dunno if it's trilayer or not) and then you can re-chrome or powdercoat. I was going to put them on an unfinished car, so the curb rash didn't bother me. Just decided against the style.

I will entertain any reasonable offer. Even lowballs. They're sitting in my storage unit right now, but I can take pictures.

toms84ss

iTrader: (1)

I need a 91 TPI cruise control cable.

Got one,thanks guys.

JP92RS

I need a 91-92 TPI fuel rail with injectors, a "350" prom for my computer from a 90 vette and a 91-92 TPI wiring harness.

GIJason91

im looking for a 80's iroc front end with the ground effects no cracks pls. lemme know what you got.

GIJason91

i have a black one with louvers its got a little rust though but no dents. PM me

ffemtm70

I am looking for a front nose complete with headlight bar......my front nose has a lot of little pits in it and i have tried to repair it with epoxy but it doesn't seem to work. My headlight bar is missing the drivers side mounting stuff so it sits a little crooked. I don't necessarily need a brand new one just one that is in decent shape that i can sand and prime. Thanks in advance.

Oh also the hood latch bracket....mine is all bent up and no longer will attach at the bottom. Once again thanks in advance.

batman-matt

standard lug nut lock key that came with 92 z28

89FRMLA350

I come back to Tucson every now and then and I have an overhead console without the plastic light cover and a set of T-Tops from an 85 Camaro without keys. Let me know if anyone needs any of this stuff. Thanks

ChainHartMachin

I need V8 transmission cooler lines that are in good condition, no kinks etc.

GIJason91

lookin for black camaro door panels power windows and locks. also looking for C6 vette rims.

Z28GEN3

Have a Camaro Airbag, anyone want it?
Have an old school Speedo Cable.

I've got a manual pedal assembly. Has a clutch switch on it.


Also have a wiring harness for power door locks and windows, got a few switches too. http://img6.imageshack.us/img6/3993/img5082o.jpg http://img6.imageshack.us/img6/8609/img5081v.jpg http://img6.imageshack.us/img6/6550/img5080f.jpg http://img6.imageshack.us/img6/9955/img5079t.jpg

I don't want anything for this stuff. I can ship it for ya if you pick up the shipping, pretty sure I can get it in a flat rate box, even it means taking something apart to make it happen.


I need the locking bracket for the rear seat belts the thing that is spot welded to the body (I have rear shoulder belts from a 4th gen), has to be cut off a donor car.
Also Could use the brackets for the rear roll up cover-also from a donor car.

I need grey front seat belts with latch hasps, can trade off my red ones if after the grey replacements are found.

lschweit

I need a front bumper cover for a 91 bird with ground effects. Preferably with no holes drilled for license plate covers or tears in it.......but beggars cannot be choosers so if anyone has anything let me know!!!

godreject

iTrader: (1)

looking for a newly rebuilt or recently rebuilt 700r4 for my 91, im in Cali but willing to take a roadtrip for the right part/price. let me know if anyone has one thanks

91ZRocker!

looking for new back hatch glass... the one i have has alot of dicked up tint and i just wanna replace it.

GIJason91

now on top of my previous post i need black trunk carpet, brake pedal sensor, and a aftermarket starter. let me know!

Arizona IROC

iTrader: (4)

What style? Small fin? Big wing? Inboard cyclops? defroster?

Let me Know, I have several nice ones for $40 each