Measurements of 1LE caliper bracket
#1
Junior Member
Thread Starter
Join Date: Feb 2001
Location: Sulphur Springs, IN
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Measurements of 1LE caliper bracket
Can anyone measure their caliper bracket, 18016034, for me? I need the distance between the holes, center to center.
Thanks,
Todd
Thanks,
Todd
#3
Supreme Member
iTrader: (7)
Join Date: Mar 2001
Location: Fort Mill, SC, USA
Posts: 6,420
Likes: 0
Received 4 Likes
on
4 Posts
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
I may have a pic of one somewhere, I'll have to look. Mine are installed or I'd just measure the thing.
Which distance do you need? The outer holes or the inner holes? If it's the outer holes, just measure the distance between the mounting holes on the spindle. If it's the inner holes, measure the distance between the holes on the caliper cradles.
Ed
Which distance do you need? The outer holes or the inner holes? If it's the outer holes, just measure the distance between the mounting holes on the spindle. If it's the inner holes, measure the distance between the holes on the caliper cradles.
Ed
#4
Junior Member
Thread Starter
Join Date: Feb 2001
Location: Sulphur Springs, IN
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
I don't have the caliper cradles. I am going to put C5 brakes on the car. I was going to see if the bracket 1LE bracket might work, but I doubt that it will since the C5 rotors are bigger anyway. I'll probably make some brackets and go from there.
Thanks,
Todd
Thanks,
Todd
#5
Junior Member
Thread Starter
Join Date: Feb 2001
Location: Sulphur Springs, IN
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
I have a picture of the bracket. I suppose I could measure my spindle, compare that to the picture and figure out the distance that way. I didn't think about that until Ed's post though.
Thanks,
Todd
Thanks,
Todd
#6
Supreme Member
iTrader: (7)
Join Date: Mar 2001
Location: Fort Mill, SC, USA
Posts: 6,420
Likes: 0
Received 4 Likes
on
4 Posts
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Interesting mod. Keep us posted with your progress.
Ed
Ed
#7
Supreme Member
Join Date: Apr 2000
Location: Stillwater, OK
Posts: 1,154
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Formula
Engine: 355 DFI Superram w/ R-Trim
Transmission: Probuilt 700r4
I'm sure you have already been to this page, but I want to add it to this thread for those who havent...
http://home.earthlink.net/~kiszka/C5_brake_upgrade.htm
http://home.earthlink.net/~kiszka/C5_brake_upgrade.htm
Thread
Thread Starter
Forum
Replies
Last Post