Other traction mods
#1
Member
Thread Starter
Join Date: Oct 2001
Location: Marion, Indiana, USA
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro
Engine: 350 Carbed
Transmission: Stock 700r4
Other traction mods
Here is what I already have done for traction..
Boxed lower control arms
Relocation brackets (85% done)
V6 springs in the rear
Removed the front sway bar
SFC are going in Tues. or Wed.
Boxing the torque arm Tues.
I am racing on Wed. night for test and tune. I am stuck with G60 bias plys
I am wondering if there is anything I can box or fab up for traction. buying anything is out of the question. I am wanting free mods. I also have some of my used slicks from last year I may try to reuse. I am more then likely mounting the battery in the hatch.
Also are there any tips or tricks for the bias ply tires? Like air pressures, long or short burnouts, etc...
Thanks for all the help guys. You all freakin ROCK!
-Terry-
Boxed lower control arms
Relocation brackets (85% done)
V6 springs in the rear
Removed the front sway bar
SFC are going in Tues. or Wed.
Boxing the torque arm Tues.
I am racing on Wed. night for test and tune. I am stuck with G60 bias plys
I am wondering if there is anything I can box or fab up for traction. buying anything is out of the question. I am wanting free mods. I also have some of my used slicks from last year I may try to reuse. I am more then likely mounting the battery in the hatch.
Also are there any tips or tricks for the bias ply tires? Like air pressures, long or short burnouts, etc...
Thanks for all the help guys. You all freakin ROCK!
-Terry-
Thread
Thread Starter
Forum
Replies
Last Post