bad_to_the_bone

hey guys i picked up a set of competition engeneering weld in connectors that the front bolt in were the trans cross member bolts in in addition to this what should i add to stiffen up the body/ chassis as im running a healthy big block 425 whp is what the car run on the dyno b4 i purchased the motor and was in an auto car as mine is manual haha and had the car on the road 1 1/2 months and the doors are getting hard to close should i put the car on a frame jig and put the conectors in it or should i ge another set of connectors and have 2 sets in the car ? as i dont want to cage the thing as its mainly a street car what would you guys suggest?

//<86TA>\\

iTrader: (14)

you seem to have lost some periods and commas, so i will provide you with some to use free of charge. .........,,,,,,,,,!?!?. . tossed in a few extras for you.

if your doors are getting hung up i would ge the car straightened before welding in the frames. they should provide the support you need. No need for the cage unless you are racing the car.

bad_to_the_bone

alright thanks.