06-13-2007, 06:31 PM
|
#1 |
| Junior Member
Join Date: Jul 2005 Location: Arlington,TX
Posts: 28
Car: 1939 Chevy Coupe Engine: 383 TPI, Dart Pro1 180cc heads, etc Transmission: 700R4 Axle/Gears: 3.73 | Ignition Control Module Issue | I had a hard start problem meaning my noid light would not flash during cranking. With a small shot of ether, the car fires up and the noid light flashes. I replaced the ignition control module and the car starts right up on its own with no problem. After a few starts I run into the same problem. Something seems to be causing the modules to fail on the start circuit. Can anyone suggest what might be causing this? | | | |
| |