no spark -please help
10-25-2011, 08:17 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2011
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Camaro
Engine: V6 2.8 MPFI
no spark -please help
Ok I have an 89 Camaro 2.8 v6. I'm not getting any spark. I have replaced wires, plugs, distributor cap and rotor as well as get my ICM tested and it was good. I'm getting spark/fire from the the wire that goes onto the middle of the distributor cap but that's it. Please help I'm not sure what to do.
10-26-2011, 12:47 AM
#2
Member
iTrader: (1)
Join Date: Dec 2010
Location: AK
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 camaro RS
Engine: Vortec 355,262/268 cam,670holley
Transmission: 5speed
Re: no spark -please help
i would pull the cap off and look at the dist. and make sure your dizzy isnt all corroded and everything. your coil is putting out spark so that eliminates that.
10-26-2011, 11:30 AM
#3
Junior Member
Thread Starter
Join Date: Jan 2011
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Camaro
Engine: V6 2.8 MPFI
Re: no spark -please help
My dizzy doesn't look that bad I don't see any corrosion. What about my pick up coil, could that be doing it?
Thread
Thread Starter
Forum
Replies
Last Post
RedLeader289
Tech / General Engine
10
05-28-2019 01:47 PM
HoosierinWA
Tech / General Engine
5
10-07-2015 10:15 AM
