GM part number for TPI fuel pump
#1
GM part number for TPI fuel pump
What is the part number for the GM fuel pump? Are all years the same pump?
------------------
87 Formula 350 13.94@96.67
98 Z28 1LE 13.15@107.59
1LE Owners Association
------------------
87 Formula 350 13.94@96.67
98 Z28 1LE 13.15@107.59
1LE Owners Association
#2
Dont bother with a GM fuel pump... do a search here for Walbro pumps and get one. I just put mine in Saturday, when my AC-Delco couldnt keep the pressure up. I had just replaced it less than 2 years ago too.
------------------
Mike Metzler (Desert86Roc)[*] Check Out:SpeedWorldMotorplex.com[*] Check Out:Chevrolet F-Body Online Part & Illustration Manual[*] My 86 IROC 305 TPI Page (406 build in progress)
ET's @ 1250 ft[*] 14.28 @ 95.461 mph (uncorrected, NOS, no headers)[*] 15.362 @ 88.238 mph (uncorrected, headers, no NOS)
<><
[This message has been edited by Desert86Roc (edited September 24, 2001).]
------------------
Mike Metzler (Desert86Roc)[*] Check Out:SpeedWorldMotorplex.com[*] Check Out:Chevrolet F-Body Online Part & Illustration Manual[*] My 86 IROC 305 TPI Page (406 build in progress)
ET's @ 1250 ft[*] 14.28 @ 95.461 mph (uncorrected, NOS, no headers)[*] 15.362 @ 88.238 mph (uncorrected, headers, no NOS)
<><
[This message has been edited by Desert86Roc (edited September 24, 2001).]
#3
TGO Supporter
Join Date: Jul 1999
Location: Madison, AL, USA
Posts: 402
Likes: 0
Received 0 Likes
on
0 Posts
Here's some Delco #s for reference. I've gathered it from various places and cannot guarantee it's accuracy.
305 TPI, EP-241 - 24 GPH @ 50 psi
350 TPI, EP-242 - 28 GPH @ 50 psi
LT1, EP-271 - 33 GPH @ 51 psi
Syclone, EP-381 - 41 GPH @ 51 psi
I replaced my failing stock pump with the EP-381. It was a direct bolt-in. If I did it again today I'd probably go Walbro.
305 TPI, EP-241 - 24 GPH @ 50 psi
350 TPI, EP-242 - 28 GPH @ 50 psi
LT1, EP-271 - 33 GPH @ 51 psi
Syclone, EP-381 - 41 GPH @ 51 psi
I replaced my failing stock pump with the EP-381. It was a direct bolt-in. If I did it again today I'd probably go Walbro.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
beachrodder
Tech / General Engine
7
08-25-2015 08:05 AM