CAMp3RO

i have an 89 rs with a 700r4. i pulled my engine and tranny beacuse i got a new motor going in (sbc 400) and i am rebuilding the tranny. i noticed i have two harnesses that go to the tranny; one square one with 4 wires (i know where this goes) and one with only 2 wires. i cannot figure out where this one goes though. it doesnt look like it was even hooked up to anything. next question. do all 3rd gen fbodies have a cable driven speedo? if not, what year did they change. the more i look at my car, the more i seem to think there were some changes made to it that werent noted (may have been in an accident, may have a different motor, may have a different tranny, etc). thanks.

CAMp3RO

ttt

Tom91Bird

iTrader: (5)

The two wire connector that you cant find goes to the VSS sensor which is on the driver's side of the tailshaft.

CAMp3RO

thats what i thought. i might be blind, but i cant seem to find the plug on the tranny. where in relation to the speedo plug is it? front/back, etc. thanks

Tom91Bird

iTrader: (5)

Driver's side of the tailshaft.

CAMp3RO

crap, i dont see it there. did the older trannys come without it? i'm starting to think more and more that this isnt the original trans

Randy82WS7

sound slike is older model,

older ones before about 92 had cable style speedo and after that were electronic units, go here and look around theres some pics of them: http://www.geocities.com/crosley_az/700spd.htm