Bowtie Performance Headquarters
Thread Starter
Member
Joined: Dec 2000
Posts: 271
Likes: 0
From: Valley, AL
Bowtie Performance Headquarters
HOME
www.bowtieperformance.com
ONLINE CATALOG
http://www.parts123.com/PartFrame.as...erformance.com
Most of the posts I see on this forum are bad reports on many vendors, but I would like to suggest one that I have purchased many parts from, and have been completely satisified. Their not as big of a company as Summit, Jegs and similiar companies, which is maybe why they seem to strive to satisfy the customer. Their site is not as advanced as most, but with a request, they will send a free catalog which covers most of their products. One product in particular they sell that is not well-known in most places except the Southeast is Alabama Convertor Corporation (ACC). I know over a dozen guys here locally running thoses convertors, and have only seen one failure and that was one in a low-10 sec NOS'ed Big block transbrake car. The beauty is the price of the convertors, they sell for several hundred less than B&M, TCI, or ANY other convertor companies I know of. I have a ACC 4000 stall in my 82 Z28 that has over 150 passes on it and still working perfectly and I bought it for $285
from BPH, WELL worth the money!! They also have some really good deals on short/longblock crate engines. Most of their products are priced competively or better than the bigger mail-order parts warehouses. Just thought I would pass along the info.
------------------
82 Z28 350, Ported #882 Heads, Performer RPM cam and intake, hedman headers,650 Demon carb,
Trans: Turbo 350 w/ 4000 stall -- Rearend 7.5 w/ Richmond 4.10's, Auburn Minispool
Best ET: 12.52@107.2
Future plans: Dart headed, Roller cammed 383 in early '01
89 RS, L03 305, Hypertech Chip,cat delete, Dynomax exhaust,K&N open element Filter,160 stat, MSD coil --Trans:700R4 Corvette Servo -- Rearend: 7.5 GM 3.42 w/ posi-lock
New Best ET: 14.91 @92.9
Bassett Racing
Mid Atlantic F Body -82 Z28 Page
R.I.P. Dale Earnhardt #3
[This message has been edited by Basett Racing (edited April 24, 2001).]
www.bowtieperformance.com
ONLINE CATALOG
http://www.parts123.com/PartFrame.as...erformance.com
Most of the posts I see on this forum are bad reports on many vendors, but I would like to suggest one that I have purchased many parts from, and have been completely satisified. Their not as big of a company as Summit, Jegs and similiar companies, which is maybe why they seem to strive to satisfy the customer. Their site is not as advanced as most, but with a request, they will send a free catalog which covers most of their products. One product in particular they sell that is not well-known in most places except the Southeast is Alabama Convertor Corporation (ACC). I know over a dozen guys here locally running thoses convertors, and have only seen one failure and that was one in a low-10 sec NOS'ed Big block transbrake car. The beauty is the price of the convertors, they sell for several hundred less than B&M, TCI, or ANY other convertor companies I know of. I have a ACC 4000 stall in my 82 Z28 that has over 150 passes on it and still working perfectly and I bought it for $285
from BPH, WELL worth the money!! They also have some really good deals on short/longblock crate engines. Most of their products are priced competively or better than the bigger mail-order parts warehouses. Just thought I would pass along the info.
------------------
82 Z28 350, Ported #882 Heads, Performer RPM cam and intake, hedman headers,650 Demon carb,
Trans: Turbo 350 w/ 4000 stall -- Rearend 7.5 w/ Richmond 4.10's, Auburn Minispool
Best ET: 12.52@107.2
Future plans: Dart headed, Roller cammed 383 in early '01
89 RS, L03 305, Hypertech Chip,cat delete, Dynomax exhaust,K&N open element Filter,160 stat, MSD coil --Trans:700R4 Corvette Servo -- Rearend: 7.5 GM 3.42 w/ posi-lock
New Best ET: 14.91 @92.9
Bassett Racing
Mid Atlantic F Body -82 Z28 Page
R.I.P. Dale Earnhardt #3
[This message has been edited by Basett Racing (edited April 24, 2001).]
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
May 17, 2020 10:44 AM
