Does anyone have any experience with the Edelbrock Pro Flo 2?
I'm currently trying to tune a 355 small block with Brodix Race Rite 200 heads and a XR276HR cam with 112 LSA. ICL is 108.
Static compression is 10.1:1. The cam is installed straight up.
What am I missing with regards to arriving at a suitable tune?
I use the hand held module and also am using the Edelbrock Pro Flo 2 software via my laptop.
Presently the engine is a dog and can't get out of it's own way. Maybe a 13 second ride. The previous incarnation (before Edelbrock supplied an upgrade) ran a best of 13.5 sec in a 3600lb chassis. Far below expectations.
For the record, our ability with carbed vehicles is quite succesful. We seem to be missing some fundamentals with respect to tuning via the fuel injection.

Thanks in advance.
Kevin.