Does anyone have the ram air 2 hood with the "ram air" stick on the sides. ive seen a few pics but it was someone else postin there pics. but if its possible can any of you guys possibly measure how far back from the nostrole on the hood and how far up on the side? if so that would be great. i just got done paintin my friends hood (even though he blew the motor and is now 99% sure sellin the car with the hood) and i got the ram air stickers and dont know how far to put them back on there. if you guys can post some measurements that would be cool or some pics big enuff for me to get a good estimate on how far back. thanx

 

On mine they are 6 inches back from the top of the nostrole. They look farther back in this pic, but you can move them around a little after you first put it on if you dont get it perfect on the first try.

 

I know you said ram air 2 but this may help anyways.

Mine are placed 3 inches back.

 

I just measured mine. Its 5 1/2 inches from the front middle portion of the nostril.

<img src="http://elite-fraggers.org/sonarun/candysonar/01020045%20(Medium).JPG">

it looks about perfect to me.

 

USE SOAPY water to help u get them in place then it dreies and they r where u want em JUst a lil trick I picked up along the way

 

Sonar_un thats just perfect pic and thats great info. i put them on in like 5 mins one is off by about less then 1/4'' i can notice but some people dont. heres a pic of them

 

believe me, no one will notice..

it looks good!

 

yeah, agreed. dont even worry about it. very nice.

 

thanx guys