Ok, i rear ended a guy a couple of months ago and I finally got my bumper and stuff from GM. The front piece that holds the top of the nose to the main section of the car is somewhat out of whack. (the piece is the one that has the long metal slats hold the plastic down..) Anyone know how much this POS costs, or have one lying around that will fit an 87 GTA for cheap? thanks...
ben

------------------
87 5.7 gta - ASCD Ram Air II hood, all the ghetto mods, cam, rockers, chip, exhaust, functional ram air, blah blah, all that stuff. best et: 13.96 @ 99.21mph r/t .601

 

Ben, if you need the long single piece that lays flat behind the nose panel..... that piece from GM will cost you well over $100.00, if memory serves correctly. You might try looking at some parts yards that deal with older F-bodies......

Used and in good shape, it should go for somewhere around $50-75.....

If you just need the short metal pieces (about 12" long) that tack on the backside lip of the rubber bumper cover, all three are around $10 each new from GM, I think.

Good luck!

------------------
Frankie Rider, 2
The GTA Source Page
-----------------------
1988 GTA Red 5.7L Hatchback
1988 GTA Black 5.7L Notchback
1988 GTA Gunmetal Metallic 5.0L Hatchback

[This message has been edited by FrankieRider2 (edited September 13, 2000).]

 

I have 3 of them I want to get rid of. One of them IS from an 87 GTA. I would like $74 shipped if you want to buy mine. Email me if you are interested.

James

------------------
If the women don't find you handsome they should at least find you handy. Red Green

[This message has been edited by scooter (edited September 13, 2000).]