what are your takes on this wing?
Thread Starter
Member
Joined: Apr 2004
Posts: 145
Likes: 0
From: Naples, Maine
Car: 1987 Pontiac Firebird
Engine: 350 sbc
Transmission: T-56
what are your takes on this wing?
saw this ad in Chevy High Performance. looks like the Daytona Charger wing. what im wondering is what it would look like on our cars, and how many inches it is tall and specs. like that. does anyone know of someone with this on thier car? now i know im gonna get major 3 degree burns for this but i was thinking it would look good to even out my car when i get the 3 inch cowl hood. (gets ready to duck under the crossfire)
Supreme Member

Joined: Mar 2001
Posts: 5,144
Likes: 2
From: CC, TX
Car: 1999 Yamaha Banshee
Engine: 379cc twin cyl 2-stroke stroker
Transmission: 6 spd manual
Axle/Gears: 14/41 tooth
You are going to have to duck 6' deep in this forum prolly. I don't like it and wouldn't put it on my car if I was getting paid to do so.
that wing looks bad. It doesnt match anything. maybe, and i mean maybe , if you did something to your car to set if off u may pull it off , but i dont think so . I think it wil look bad no matter what you do , but prove me wrong, get it and make it look good.
Member
Joined: Aug 2002
Posts: 357
Likes: 0
From: Knoxville, TN
Car: 1987 Pontiac Trans Am GTA, 1992 Chevrolet Camaro RS
Engine: Custom 350, 3.1 V6
Transmission: 700R4, 700R4
I don't like it in that picture, but I'd like to see a different picture of it in color.
Trending Topics
Thread Starter
Member
Joined: Apr 2004
Posts: 145
Likes: 0
From: Naples, Maine
Car: 1987 Pontiac Firebird
Engine: 350 sbc
Transmission: T-56
yea thats what im wondering is how tall it is. they dont have a website and they only have a # to call to order no questions and a email to order a catolog. im only interested in it because with a 3'' cowl it'll bring a alot of attention to the front but with something eye catching (not sure it would be GOOD eye catching according to the replys so far) but it would even out the appearence from front to back with out one particular piece standing out. like flynlow's camaro, with a larger hood like that it would draw alot of attention to the front but with that wing it levels out the appearence. edit again: yea it is a bit pricey i would hate to pay $500 just to end up not likeing it so im trying to get the specs to make something that will look like it so i can look at it first without buying
Last edited by 87DeathBird; May 10, 2004 at 03:54 PM.
Member
iTrader: (1)
Joined: Aug 2002
Posts: 389
Likes: 1
From: Vancouver, B.C.
Car: 1991 Z28 1LE
Engine: 355 CID HSR
Transmission: T56
Axle/Gears: 3.23 for now
I think we should leave it for the Mustang boys!!! That thing would do wonders for the performance and looks of their rides
Senior Member
iTrader: (10)
Joined: Oct 2003
Posts: 666
Likes: 0
From: IL
Car: 91RS_92Z28
Engine: 5.0_5.7
Transmission: WCT5_WCT5
Axle/Gears: 3.08_3.42
I saw one of those installed a Camaro driving on the highway awhile back.
I almost crashed I was laughing so hard. seriously.
Things like this give third gens a bad name.
To each his own, I guess.
I almost crashed I was laughing so hard. seriously.
Things like this give third gens a bad name.
To each his own, I guess.
Joined: Dec 2000
Posts: 2,361
Likes: 2
From: Buffalo, NY
Car: 1984 Trans Am
Engine: LT1
Transmission: T56
Axle/Gears: 10 bolt w/ 4.10 gears
that wing does look too tall. What about using a Camaro Highrise spoiler? Another member, Deadbird, had one on his car for a while and it looked sweet. It'd definitely match well with the 3" cowl hood. Kinda fitting... Deathbird may get an idea from Deadbird.
Member
Joined: Apr 2004
Posts: 109
Likes: 0
From: Vermillion, South Dakota
Car: 2002 Camaro SS
Engine: LS1 350 V8
Transmission: Automatic 4 Speed
Well if you were driving a import burner it would probably impress other import boys considering they seem to love the extremley big wings but your driving a 3rd gen... it would catch a lot of looks but not good ones.
It wouldnt let me say the R word I guess, although I wouldnt have meant anying racial about it, I dont think its right to call cars with wings like that imports because most people who drive imports dont make their cars look dumb its just the people who do insane things to their cars who deserve the name.
But im still a domestic man!!!
It wouldnt let me say the R word I guess, although I wouldnt have meant anying racial about it, I dont think its right to call cars with wings like that imports because most people who drive imports dont make their cars look dumb its just the people who do insane things to their cars who deserve the name.
But im still a domestic man!!!
Last edited by Outlaw87; May 11, 2004 at 02:56 AM.
Supreme Member
Joined: Oct 2002
Posts: 1,259
Likes: 0
From: Los Angeles, Ca.
Car: Base Firebird
Engine: TPI 350
Transmission: T56
Axle/Gears: D44
Things like this give third gens a bad name.
it seems pretty tasteless to me... in order for that wing's design to be cohesive with the rest of the car, you'd have to have one of those ferarri-emulating bodies on it; not saying that would look good either, just saying that the wings design would stick out like a sore thumb on all but the most drasticly modified thirdgens, and such cars probably won't be too aestheticly appealing...
Member
Joined: Jun 2003
Posts: 180
Likes: 0
From: Aurora Colorado
Car: 1989 camaro
Engine: 305c.i.d...... FOR NOW
Transmission: 700R4.....FOR NOW
Axle/Gears: 3.42 moser posi
Re: what are your takes on this wing?
Originally posted by 87DeathBird
saw this ad in Chevy High Performance. looks like the Daytona Charger wing. what im wondering is what it would look like on our cars, and how many inches it is tall and specs. like that. does anyone know of someone with this on thier car? now i know im gonna get major 3 degree burns for this but i was thinking it would look good to even out my car when i get the 3 inch cowl hood. (gets ready to duck under the crossfire)
saw this ad in Chevy High Performance. looks like the Daytona Charger wing. what im wondering is what it would look like on our cars, and how many inches it is tall and specs. like that. does anyone know of someone with this on thier car? now i know im gonna get major 3 degree burns for this but i was thinking it would look good to even out my car when i get the 3 inch cowl hood. (gets ready to duck under the crossfire)
Maybe oldbluezz will be kind enough to snap a pic of his wing. It looks like that one and he has a LED third brakelight in it. I've seen it in person and it looks awesome.
Junior Member
Joined: Jan 2004
Posts: 81
Likes: 0
From: Houston, TX
Car: 91' Z28
Engine: 350 TPI
Transmission: 700r-4
it looks kinda like the wing used on that prototype camaro, just bigger
you know, this camaro
http://www.camaroz28.com/articles/wi...n/index.shtml#
you know, this camaro
http://www.camaroz28.com/articles/wi...n/index.shtml#
TGO Supporter
iTrader: (1)
Joined: May 2002
Posts: 2,480
Likes: 2
From: El Paso, Texas
Car: 1987 IROC Z
Engine: 350 TPI L98 block
Transmission: 700R4
I'd sport that if it were legal to mount armaments on the wing. I'd do it up like that "MASK" camaro from the 80's
Supreme Member
Joined: Jun 2003
Posts: 1,054
Likes: 0
From: Ft. Branch, In.
Car: 88 formula WS6
Engine: 305 Lo3
Transmission: 700-R4
Evidently he does! Why else would he be looking for other's oppinions? Who want's to look stupid in the eye's of their peers?
I've seen a triple winged third gen. in Beaver creek Oh. and man, it looks soooo stupid I couldn't help but LMAO. I believe he's trying to avoid that oppinion from other third gen. owners.
Some camaro's have that tall wing and it doesn't look any better on it than it did on the 70 Charger Daytona!
I've seen a triple winged third gen. in Beaver creek Oh. and man, it looks soooo stupid I couldn't help but LMAO. I believe he's trying to avoid that oppinion from other third gen. owners.
Some camaro's have that tall wing and it doesn't look any better on it than it did on the 70 Charger Daytona!
Senior Member
Joined: Oct 2000
Posts: 637
Likes: 0
From: Littleton, CO
Car: 85 Z28
Engine: 305 TPI (dead) -> building 355
Transmission: 27 spline 700R4 (another one died) -> T5 goin in next
Dude, if you want an F40 wing, don't get on SOOO freakin tall. No offence, but the Wings West (the import guys) F-40 wing looks MUCH better cuz it's a lot lower. That's the one I found sitting in the back seat. The cowl hood does set off the wing like you were thinking, but I don't think the hideous one you posted would be able to be set off very well. Oh yeah, I think the WW is only $400, not 5. Sorry to be so rude and cruel, but that one is really that bad.
This looks much better:


and my favorite shot:

http://www.oldbluez.cz28.com or http://photos.yahoo.com/j_hougnon if you can't see em.
later,
Jesse
This looks much better:


and my favorite shot:

http://www.oldbluez.cz28.com or http://photos.yahoo.com/j_hougnon if you can't see em.
later,
Jesse
Thread Starter
Member
Joined: Apr 2004
Posts: 145
Likes: 0
From: Naples, Maine
Car: 1987 Pontiac Firebird
Engine: 350 sbc
Transmission: T-56
wow your maro looks pretty bad a$$ with that wing. i think you changed my mind i think im gonna get that wing. does the place you bought it have a website?
Senior Member
Joined: Oct 2000
Posts: 637
Likes: 0
From: Littleton, CO
Car: 85 Z28
Engine: 305 TPI (dead) -> building 355
Transmission: 27 spline 700R4 (another one died) -> T5 goin in next
Thanks.
Yeah,
I believe it's http://www.wingswest.com It's the universal F40 wing. That's the closest thing that anyone has found so far. I was not the one who bought it, but it seems to be right. It even has the LED option (for third brake light).
The best thing to do would be to measure the rear deck and call them to figure out if you need the 51 or 53 inch. I just don't know where they measure from for that and it could be either one (IIRC).
Try that and see if it works.
Don't forget the hood to set it off. I don't know what it'd look like without one, but I don't think it'd look right, and I dunno what it'll look like on a bird.
-Jesse
Yeah,
I believe it's http://www.wingswest.com It's the universal F40 wing. That's the closest thing that anyone has found so far. I was not the one who bought it, but it seems to be right. It even has the LED option (for third brake light).
The best thing to do would be to measure the rear deck and call them to figure out if you need the 51 or 53 inch. I just don't know where they measure from for that and it could be either one (IIRC).
Try that and see if it works.
Don't forget the hood to set it off. I don't know what it'd look like without one, but I don't think it'd look right, and I dunno what it'll look like on a bird.
-Jesse
Supreme Member
Joined: Apr 2003
Posts: 3,563
Likes: 1
Car: 1991 RS Camaro (Jet Black)
Engine: 95 383 CI (6.3) LT1
Transmission: 95 T-56
Personally, I don't like that wing, my brother in law had on on his fourthgen and it looked like you could hang the camaro on a coat rack. To each his own.
Member
Joined: Mar 2004
Posts: 161
Likes: 0
From: San Rafael, California
Car: 92 Camaro RS
Engine: 305
Transmission: 700R4
Pic of something a little familiar (lot smaller) for a reference
http://cgi.ebay.com/ebaymotors/ws/eB...&category=6161
http://cgi.ebay.com/ebaymotors/ws/eB...&category=6161
Supreme Member
Joined: Dec 1999
Posts: 1,563
Likes: 0
From: Where the heck am I !..Oh yeah,in Lousy-ana.
Car: 1991 Z28
Engine: 350 TPI
Transmission: 4L60 automatic
here's one for sale with that wing....
hideous paint job toohttp://www.dealsonwheels.com/search/...-200310-000008
Member
Joined: Mar 2004
Posts: 161
Likes: 0
From: San Rafael, California
Car: 92 Camaro RS
Engine: 305
Transmission: 700R4
More Pictures of that wing painted on a nice car...
http://cgi.ebay.com/ebaymotors/ws/eB...479063816&rd=1
and i just noiced the tail light covers, somthing a lil different...
http://cgi.ebay.com/ebaymotors/ws/eB...479063816&rd=1
and i just noiced the tail light covers, somthing a lil different...
Joined: Aug 1999
Posts: 492
Likes: 0
From: Aurora, ON, Canada
Car: 1989 Iroc-Z
Engine: 5.7L TPI
Transmission: 4 Spd Auto
Call me crazy but I dont think it looks too horrid I kinda like it with the louvers. Cant say Id consider getting one but Ive seen much worse.
Supreme Member
Joined: Nov 2001
Posts: 1,160
Likes: 0
From: So. California
Car: 91 Camaro RS
Engine: 305 TBI
Transmission: Pro-Built Automatic/Vigilante 2800
Car is straight from TJ!! Members should be automatically banned for even considering such mods!! :nono:
Supreme Member
Joined: Dec 2000
Posts: 2,375
Likes: 0
From: Tucson, AZ, USA
Car: '99 Trans Am, '86 Camaro
Engine: LS1, Scrap
Transmission: T56, T5
Axle/Gears: 3.42 Stock ZT, 3.42 Open
That's a custom setup.. kinda hard to exactly duplicate.
And yes, mechamwingedta, many of us wish we had MRMSE wings
And yes, mechamwingedta, many of us wish we had MRMSE wings




