I just purchased a set of 17 x 9.5 56mm offset wheels for my 86 trans am.

I know I need spacers, heres what people area saying:
1.25" rear and 2.25" front.

these wheels are a direct bolt on for fourth genners. So heres my question:

is that the minimum? I have seen some pics of these cars and the wheels stick out too far for my liking. I was hoping to err on the short side and maybe use a disc spacer for fine tuning.

Anybody got an pics or advice?

thanks in advance

 

I dont know the exact offset of the camaro ss wheels I have but if they are the same offset as your wheels then 1.25" and 2.25" spacers would be fine. My rear wheels, the outer edges of the tires line up with the inner edge of the wheel well lip so they dont stick out at all.

------------------

1987 Iroc 350
GTS headlight/tail light covers
Camaro SS Wheels w/Sumitomo HTR ZII 275 rear, 255's in front
K&N filters
Adjustable Borla cat back
Large tube runners
ported plenum
Holley afpr
SLP 1 3/4" headders (not installed yet)
FUTURE GOAL:
To go really F'in fast!!!

Some pics of it at
http://albums.photopoint.com/j/Album...949&Auth=false

 

I have the ws6 wheels on my 91 formula, i have the 2.25 " in the front and the 1.25" in the rear they , sit allmost in the same spot as the original wheels , Ill have pics up soon

------------------
Pino
91'Formula
LB9 305 TPI 5-speed
http://www.geocities.com/MotorCity/Garage/5654/mur91.jpg