I've been gone for a while, anyway, i saw and dowloaded the movie"THE FAST AND THE FURIOUS" I cant seem to get past the imports, the way they modified them. U could say rice rice rice, all u want, doesnt really affect me. But im sort of tired of the boring original 92' camaro front bumper, The only thing i could think of was installing 92' Z28 spoiler and Zr1 rims, To be honest i want somthing extoic done to the body, besides cowl hood, something exotic, a head turner. I mean i have a 305 tpi pushing 400 horses, but i want the car, to look, sick, anyone know of a website,that has body fabrications for 92' camaros, Just so u know im on a budget, so i dont need anything to change the whole body, just something to change the front bumper, Fenders, anything,

------------------
92' camaro
New 305 block TPI conversion, Flat top pistons,Bore over .30 Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads, accel cam,52mm throttle bodie, SLP runners Home aid cold air induction, Air foil,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods MSD 8.5 mm wires, bosch plattinum plugs, hypertech cap & rotor and coil, Edelbrock TES headers, free flowing catalytic converter and a 3 inch force II flowmaster exhaust system, and a 3 inch cutout,Zoom multi friction clutch, T-5 tranny,billenstien shocks&struts.
Soon to come!!!
Procharger system 12lbs o boost.
New paint job(hawaiin orchid purple)Cast alluminum ZR1 rims w/ 275 tires.
Favorite quote: "where ever u go, there u are"

Other car;
1971 plymouth Duster
Mods:340,edelbrock victor jr. intake, 650 4 barrel holley, heddman headers,40 series dual flowmasters, cold air intake,4:10 gears, just got a new paint job and cragar rims with 315 tires in the back.
:Yeah its not a chevy but damn how many 71' dusters have u seen in the streets.

 

Dude, u can have a car that will get attention without going to "rice" to get it or changing your bumpers to something ridiculous. Look at some custom cars to get ideas, like the MYZ. Camaros that look muscular and like they want to kick a** is the way to go. I like some of them stock better than modified (Some Third Gens look better stock) but the RS's and SC's can use something.

------------------
89 RS

STILL Looking For:
87 IROC-Z28 350 TPI



[This message has been edited by IROCZTWENTYGR8 (edited July 09, 2001).]

 

I hear you. GM did make something close to what you're talking about. I really like the way some of the C4 Vettes look with the real low ground effects and the big spoiler in the back. I'd like a front facia for my car the is low to the ground and wraps around the front with a big opening in the front. I also want side skirts and a rear bumper to match. Something like they run in Trans-AM would be really cool.

------------------
'87 Bird 350 .060 over 700R4 + Lots more

 

it only costs about $6000, but i bet you'd be the only with it

------------------
My 1986 Z28
GM350, T-5, 3.23's, lots of go fast goodies, 4th gen Firebird interior etc...
85 IROC w/ 1364 miles!

You'll always find what you've lost in the last place you look

R.I.P Dale Earnhardt

 

..i was looking around my dad's shop and i came across the fromt bumper to a new grand prix, i think, what i wanted to do was incorporate the fog lamp sockets into my car so the fog lights are at the corners of the bumper instead of in the middle, like the newer 4th gens... i think that plus a straight f. bumper instead of how our gfx comes to a point in the front would look cool. also our SQUARE sealed beam headlights could go, someone needs to find a good replacement. but good luck taking a car designed in the 80's and making it look exotic..

 

Its obvious, I want something done to the body of my 92' camaro. I love the 3rd gen, dont get me wrong, but i feel its time for something new, i saw that body kit for $6,000 before, and im not really interested, Looks nice, but i dont have that kind of money with me, i just want something, for the front bumper, ground effects, and maybe something for the fenders, i dont want any drastic changes.

 

LOL, i just went through a huge post like this, fast and the furious and all, everyone that sees this movie wants to go *****. I am not going into it tho.

 

Hmm,,, exotic,,, lemme see,,,,

ah Ha!





"The Chevrolet Camaro Stiletto

1983 Chevrolet Camaro ITD Stilletto, One of five factory built prototypes",,, oddly with the hefty v-6 in there too.

woo-ha lol

------------------

• My Firebird

The mind is like a parachute, it only works when its open

[This message has been edited by deadbird (edited July 10, 2001).]

 

Tell me this isn't cool




------------------
'87 Bird 350 .060 over 700R4 + Lots more

 

I think it would look better like this IMO

 

Dead bird got it right, Hey deadbird can u do me a favor, could u possibly add a camaros front bumper on the redfirebird that u did, and put Zr1 rims pleazzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz

 

All I need to do now is find out where that kit came from. Could you shave the door handles while you're at it?

------------------
'87 Bird 350 .060 over 700R4 + Lots more

[This message has been edited by ATOMonkey (edited July 10, 2001).]

 

Heh,, I don't think I'm quite good enough to put a camaro front on there (no harm in trying tho I guess,,)

The kit is a Predator gfx kit made by Gobel (Kobel? maybe) I think/believe, JCWhitney used to carry them.

[This message has been edited by deadbird (edited July 10, 2001).]

 

I have to agree the smoothed out body kit looks much better. Still would have to loose the mini F40 wing on the back though.

------------------
'86 Camaro SC 2.8 V6, 5spd, T-Tops
Mods:

(Performance)
Flowmaster cat back exhaust

(Non-Performance)
Pioneer DEH-P4000 CD receiver head unit
Pioneer 6X9 Tri-Ax speakers
Jensen 8" dual voice coil sub
Blacked out tail lights and side markers (VHT
Nightshades spray tint)

3

 

I agree, it Ticks me off some times when you roll up next to a Honda or something and it is all Decked out with eye candy. Dont get me wrong. I love the way a camaro and firebird looks, it just gets on my nerves that they make things for imports. I wish some one would come out with some thing alittle flashy for the 3rd gen. Not to flashy were it gets called rice. Although I will get flamed prolly for sayin it. I just want a litte flashness. But who cares. Just my 2 cents ( tink tink)

------------------
89 RS Camaro
Hedman Headers, Highflow Cat, Flowmaster 80 Series
180 Degree Thermo
Open Air Element with K&N Air Filter
Custum Burned Chip

So Many Mods......so little time

www.rit.edu/~cjp8408

[This message has been edited by PopaPork (edited July 11, 2001).]

 

The firebird above has lost it's door handle now (I personally like the contrast doorhandles & body moulding add but, no one asked ).

This is a hack job, like most, (plus you'll really need to squint) on the camaro front request. I couldn't find any (big) pics of camaros at the angle the bird is sitting so,,, well,, here,,



It's not a great edit but, I'm nowhere near a pro at doing that.(also forgot to look for zr1 wheels,, u can use ur imagination )

As far as the back "f40" wing,, it appears to just be a 91-92 high rise camaro wing (not a half bad , and affordable, replacemet for the rotten factroy aerowing)

[This message has been edited by deadbird (edited July 10, 2001).]

 

It may be a Hack Job but its a pretty good one. Even though you have to squint. I seen pics of that firebird and liked it. Looks just as good as a Camaro also.

------------------
Third Gen Project
1989 305 tbi Camaro RS Red/Red
Ram Air II Hood
Centerline Champ 500 Rims
Edelbrock Open Element
MacEwen White Faced Guages

"Stock?! Theres nothing "stock" about a stock car."

 

deadbird...i think that was a damn good job on puttin the maro front end on there
i like the way those ground effects look moulded in.
heres a pic of what a 91-92 TA might look fully shaved, body dropped, chopped top, and with the bumper removed and a "roll pan" type of thing moulded in ....
kinda looks like a vette rear end from the side

 

Man, that is a great job deadbird! I am glad you did that because now I like the Ram Air hood on a Camaro. I think everything looks nice and smooth on it. It is nice to see some new ideas so keep up the good work

 

Consider a 4th gen styled fiberglass hood to give it a new wild look and lower it with ebiach springs..

 

This isn't cool.



------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
"I didn't know a bored out Ford could go so slow" -Shenandoah

 

Hey guys thanks alot, guess I'm just a bit more critical.

Jim85,,,,, LMAO (I did my best from saying that)

 

Where did you find that hideous thing?

 

Among all the cars on this site,,

http://www.pebblenet.com/conceptcarz

That ,um,,, :cough:exotic:cough: camaro,, was in there with them,,,

 

Hey deadbird,
Or anyone for that matter, anyone know of a place where i can get that syle ram air hood, thats on the red firbird, I need that hood for a 92' camaro, if u possibly know the place, can u tell me the price as well. that hood would be perfect for me>>

 

They don't make that style RA hood for a Camaro . The only Firebird style hood for the Camaro's is the RA II ...which looks hideous on a Camaro . But I do agree , from that photoshop pic , the 93-97 RA style would probably look really good on a camaro .


------------------
Derek 90 IROC 5.7
Mods: All the usual bolt ons siamesed base , 2500 stall , 373's , SS hood ,big and littles , lotta reduced weight. Stock heads/rockers , cam ,runners , chip and TB
Best Et: 13.12@101 ...1.701 60 ft.

 

That prototype Camaro is UGLY! Thank goodness they didn't make them like that! Kinda looks like a Daytona, or maybe my mind is just wandering around, and putting two completly unlike things together. Who knows....

 

The Fieromaro?

Dear god, is there no taste left?



------------------
Ryan MacEwen Pruyn
MacEwen Motorsports


1987 GTA 350 6spd, White OEM instruments, 17" Borbet Type A's, 275/40ZR17's, 255/45ZR17's, Koni Sport Adjustables, Eichbach Sport Springs, Poly U, everywhere, Guldstrand Engineering Panhard rod, LCA's, Baer Racing Tie Ends.