for a guy who wont take a sticker within 15 feet of his car, count me in!! thats a sweet idea, especially the member names. could do the lay out like www.thirdgen.org on the top of the frame and the membername at the bottom. i bet it would get other 3rdgen owners on the board too.

------------------
1979 L-82 Beefed up Corvette. Bright-orange with orange pearl.
end of summer: NOS!! im thinkin 250 shot. (already have a full race engine.)
god i love this car.

1985 WS6 Trans AM T-tops
bone stock sloth of an engine on its last leg(LG4 w/ 172,000mi)
T-5 tranny. thank god, i couldnt stand an LG4 auto.
Plans for an LT-1,
dual flowmaster exaust,
& a pounding stereo.
but its gotta wait for my Vette to be a badarse before it will be.

 

I am not too keen on the stickers but i would put one on the toolbox too,but not on my ride,no way.

------------------
www.rearman.com/camarokid.htm

 

I would take at least one of everything so far. I would have to get at least 2 beer mugs though cause I hate to drink my homemade beer alone . I like the idea of the plate frame that we can put our SN's on, but I would put the stickers on the tool box instead of the car.

Mark

------------------
1986 IROC LG4 "Bone Stock" (for now)

[This message has been edited by wiggy'sIROC (edited May 17, 2001).]

 

i just wanted to put this back at the top,i hope Dirk makes us happy,i could use those beer mugs.

 

Homemade beer huh? Sounds pretty sweet. I have been putting my stickers that I get from my summit orders on the side of my computer monitor. I figure if the rice boys can put them on and add 10HP I might be able to get a few MHz out of them too



------------------
Jay

black 85 Z28, t-tops, 4bbl carb, flowmaster 80 series muffler w/ custom tips (hollowed out cat), edelbrock chrome air cleaner, B&M Megashifter Infinity 4" 2 way front speakers and Infinity 3 way 6x9s, Alpine CDA-7863 head unit. MacEwan motorsports white gauge overlays, blue Xenon bulbs. many more mods planned (350 4 bolt main w/ holley 4160 and edelbrock performer RPM intake coming very soon)
Jay's webpage

 

Maybe I will start doing that with my stickers at work cause my computer is butt slow. I really do think that all of the ideas for plate frames and beer mugs and stuff are great and worth the effort for the pride of the THIRDGEN.ORG!

------------------
1986 IROC LG4 "Bone Stock" (for now)

[This message has been edited by wiggy'sIROC (edited May 23, 2001).]

 

count me in for license plate frames...still a bit young fo rthe beer mug(16)....maybe a small window sticker for the curve in the rear window behind the door.. iw ouldnt get a big banner thing, wouldn't get a bumper sticker either...definetly a t-shirt and a plate frame...

------------------
1991 RS LO3
mods: 14" chrome air cleaner, straight-piped after cat exhaust with one chrome dual tip on the left side.
future mods: headers, removing smog equipment, and as many cheap mods as i can find
aol s/n: budman8503

GONE MUSTANG HUNTING.......
BACK IN 10 SECONDS

 

I think windshield visor strips saying Thirdgen.org in some sweet style of writing would be cool,and in different colors too to match our cars would be nice,or is that too *****?,click on the link to my car and look at the front windshield to see my lettering strip,i think thirdgen.org strips like that would be really cool and cheap to make.

------------------
www.rearman.com/camarokid.htm

If it aint a V-8 that $hit aint fast!,unless its a GN,lol!

305 tpi,700r-4 with shift kit,My mods are minimal
MOOG 2 inch drop
k&ns
airfoil
chip and 160 thermostat
flowmaster and hi flow cat
ram air soon to come
anyone know where to get underdrive pulleys for a v-belt set up?

 

this one is going to have to get locked before it will go away!

------------------
I WOULD RATHER PUSH A CAMARO THAN DRIVE AN IMPORT

1983Z28 350w/ edelbrock performer RPM power package , dynomax shorty headers, 700R-4 with shift kit, 750cfm carb, edelbrock 3" exhaust system, ASCD SS hood, 16" IROC rims.

future mods:
completely done over suspension, black paint with flames, Hurst shifter, dakota digital gauge package, procharger supercharger.

 

maybe the webmasters at this sit should just make a merchendising branch. i bet it would help pay for space and beer.

------------------
1979 L-82 Beefed up Corvette. Bright-orange with orange pearl.
end of summer: NOS!! im thinkin 250 shot. (already have a full race engine.)
god i love this car.

1985 WS6 Trans AM T-tops
bone stock sloth of an engine on its last leg(LG4 w/ 172,000mi)
T-5 tranny. thank god, i couldnt stand an LG4 auto.
Plans for an LT-1,
dual flowmaster exaust,
& a pounding stereo.
but its gotta wait for my Vette to be a badarse before it will be.

 

How about one of those folding sun shades, you know, the foil kind with the logo and a place for your sig. I also would go for everything else(l-plate,hats,stickers,shirts,etc.)

 

I'll buy! T-shirt's good. Plate frame. I'll take a couple of beer mugs if I can drink Jaeger or Scotch out of'em. Gotta love gettin' liquored up after a nice hard drive!

------------------
You don't have to wear a tuxedo to sport a bowtie!

 

I like the idea of a sticker for the windshield. It doesn't have to be made specifically for the windshield though. Something with the letters in the same style as the liscense plate frames that could be put on top of the windshield or on a rear hatch glass. It needs to be large enough to read but not too large and no crazy letters that would be unreadable from any distance.

 

Count me in on the license frame and a t-shirt, so come on, when can we buy them, it looks like there are plenty of people to buy this stuff.

------------------
'86 IROC
T-TOPS, TINTED WINDOWS, BRAKE LIGHT BLACKOUTS
GM GOODWRENCH 350
EDELBROCK TES HEADERS
FLOWMASTER
EDELBROCK 600CFM CARB.
KN AIRFILTER
ACCEL HEI DISTRIBUTOR
2:73 GEARS
Rebuilt 700R4, with manual valve body
Soon to be installed B&M Megashifter
and Exhaust Cut-Out

 

i would definently by a license plate cover, a key chain, and if hats are made i'll take one as long as its red. i've been wearing red hats for four years everyday,so it has to be red.

 

I'll buy one or more of anything made, and I especially like the license plate frame idea, that should be made if nothing else.

 

TTT, any progress on this?

------------------
Jay

black 85 Z28, t-tops, 4bbl carb, flowmaster 80 series muffler w/ custom tips (hollowed out cat), edelbrock chrome air cleaner, B&M Megashifter Infinity 4" 2 way front speakers and Infinity 3 way 6x9s, Alpine CDA-7863 head unit. MacEwan motorsports white gauge overlays, blue Xenon bulbs. many more mods planned (350 4 bolt main w/ holley 4160 and edelbrock performer RPM intake coming very soon)
Jay's webpage
No car with 4 doors is a sports car! this goes back to my friend comparing his Maxima to a Camaro

 

They would probably not be able to make profit off of merchandise like that to stay thirdgen.ORG but this shouldn't be that big of problem, I mean it would be major advertisement. Or someone outside the site could sell them maybe (fake site).

Count me in for a frame and a shirt 2.
If some stuff does get made the shirts need to go up to XXL at least

how about floor mats?

 

floor mats, great idea.

------------------
1982 Camaro SC-Z

 

Maybe thirdgen.org should come up with a logo so the sticker didn't have to say thirdgen.org, but you could still tell who are our brethren thirdgenners on the board when driving by? Maybe someone who is artisic(or has photoshop) could put something together. Just an idea. Either way, count me in!

 

I didn't read the whole topic since it's so long. How about the thirdgen.org license plate with your screen name on it? Of course, that would cost extra.. (unless it's already set in stone)

------------------
--Steve S--
1984 Trans Am 305 LG4, 5 speed Daily Driver, Flowmaster 80 Series
Holley 600 cfm & vacuum advance
Soon: Edlebrock Intake & TES

 

I'm game for all this stuff! ThirdGen.Org merch would RULE!

------------------
91 TA 5.7 TPI Automatic.
w/WS6 and 3.23 rear.
K&N Air Filter,Hypertech Coil,Moroso Blue Max Wires, Bosch Platinum plugs gapped at .050,
JET fan switch,JET air foil,Dual cats with Flowmaster 3" exhaust (Headers coming soon),
Complete PST components on front suspension, Spohn LCAs/Panhard bar.
It's not much, but it's a start and I have a Summit catalog! :-)

 

I'd go for the frame as long as it doesn't fall apart in a month or two. Keychain too.

 

I think everyone here would get some sort of Thirdgen.org merchandise if it were available. Any ideas if and/or when production on these items will be done?

 

Count me in on a frame, t-shirt, or keychain!
I am not a big fan of stickers, though.

 

Plate frame would be sweet count me in!!!

------------------
89 GTA 350TPI Bone Stock or as I like to call it All Original,
no mods .......... YET!!!

 

i would buy almost anything that had thirdgen.org on it.. You guys should go out on your own and find a place that makes them. Usually theres a little stand in your local mall or something. They make the ones you see on minivans " this is my grandpa drive safe" type of stuff. It may look ugly but hey its a start.

 

Why would we want to put something ugly on our cars just to advertise? There are a TON of good idea here and I know I am not the only one who is looking for something good looking, high quality, and promoting the site. Sorry dude but maybe you should have taken the time to read the whole thread(I know its long but you will hear all the ideas)



------------------
Jay

black 85 Z28, t-tops, 4bbl carb, flowmaster 80 series muffler w/ custom tips (hollowed out cat), edelbrock chrome air cleaner, B&M Megashifter Infinity 4" 2 way front speakers and Infinity 3 way 6x9s, Alpine CDA-7863 head unit. MacEwan motorsports white gauge overlays, blue Xenon bulbs. many more mods planned (350 4 bolt main w/ holley 4160 and edelbrock performer RPM intake coming very soon)
Jay's webpage
No car with 4 doors is a sports car! this goes back to my friend comparing his Maxima to a Camaro

 

Count me in on those ideas Thirdgenners!

 

Thought i'd bring this back to the top. Any info if these ideas are gonna be used?

 

instead of everyone just saying to put their names in, cam and admin please post somethin to tell everyone

------------------
1992 z28 25th Anniversary
All black w/ z28 wing
Flowmaster Exhaust
350 TPI

 

ill buy anything that has thirdgen.org on it.

 

how many blingin posts we need?!!

 

sounds like a plan. I'd buy some

 

C'mon Dirk,hook it up so we can all promote this site,get cool stuff,and make you some money,how can you lose?,i am sure alot of people would mail you the money and when you got a group purchase of say 50 shirts then you could go have them made up and ship them out,if you made $5 a shirt which i am sure you would then thats $250 in the pocket,you wouldn't be getting rich but it would be worth your while and also promote the site,i bet in the first year you would walk away with a grand or 2 profit if not more, something to consider i guess.

------------------
www.rearman.com/camarokid.htm

If it aint a V-8 that $hit aint fast!,unless its a GN,lol!

305 tpi,700r-4 with shift kit,16 by 9 American Racing cross laced wheels,My mods are minimal,just a bunch of little $hit.Anyone know where to get underdrive pulleys for a v-belt set up?

 

I would get a licence plate frame.

 

i would get one and the sticker too, something small to put in the lower righthand corner and does not stand out too much.

 

Count me in for a plate frame, windsheild sticker and t-shirt!!!

 

id go for a sticker and plate cover...even might custom paint my bra

 

DAMMIT.
WHERES MY MERCHENDISING???? im tired of buying starbucks, i need thirdgen stuff....

AAHHHHH>.....

now.... back to the license plate frame. i had a couple of ladies. was ok till friend went over them with clothes with a sharpie...

thirdgen.org

hehe. and im poor, i waaannnnnnnttt it.
need puppy eyes?


------------------
91 FireBird 305 V-8
Edelbrock Catback, Fourth Gen Console. i have six cupholders. all for starbucks!
ghetto rigged cold air intake,
"My G/f Once Wanted To Break Up Because Of Competition With The Car."
GheTTo Riggers INC.
We Make Mcgyver look Like Crap
God Created The Earth, And Then Turned Up The Bass

 

HECK id get one of everything and if the stuff didnt look right on my car id still get it and put it in my garage or room to show that im a proud third gen f-body owner that is a member or thirdgen.org. and wouldnt that stuff b so awesome at car shows. you could spot your fellow thirgen.org members!!!!!!!!!!! lastly id juss like to say that this site is the best of the best. anything you ever want to know you can fond out here i love all of you guys and gals that have helped me!!!!!!!
IDEAS:
bumper sticker
key chain
lisense plate frame
tshirt (sweat shirt)
actual lisence plate (for the front if your state doesnt require)
coffee mug
and mouse pad!!!!!!!!!!!!!!!

------------------
Benji

WANT- 88-92 RS, IROC-Z, Z28 Black 305 or 350 Tint Cowl Induction Hood White Gauges Cool Blue Lights 16" 5 Spoke Rims 50 Series Tires Flowmaster Chip K & N Filter
DREAM CAR!!!!

 

I'd go for the plate holder, sticker (for my toolbox) T-shirts mugs keychains whatever
I'd also like to see maybe a thirdgen.org window banner available in various colours i think that could look pretty mean

 

I'd definently buy a license plate frame. I'd buy a mouse pad too. My friend has a bad@$$ '88 Firebird that I'm gonna put on here soon so everyone can see. He would buy a license plate frame too and some other stuff. Let's get this thing going!!!!! I'm ready to buy!!!!

 

Got another idea to go with my beer mug idea. Beer dispensing hats. Whatcha think? Man I love beer.

------------------
86' IROC-Z
5.0L TPI
Spohn panhard bar and LCA's

 

Just tryin 2 keep this post up at the top of the board. I really would like to get a license plate frame though. Also a mouse pad or keychain.

------------------
Cody

'91 Camaro RS (in readers rides)
Dark Metallic Blue
V6, Sony Xplod CD Player and Sony Xplod 6x9's. Soon to come, Sony Xplod 4x6's or Kick Panels, 4th Gen Seats, New Rims, Tires, Carpet, Floor Mats, Paint Job, Interior Color Change.
E-mail me for any questions or comments.
AdidasPredator15@jam.rr.com
http://geocities.com/adidaspredator21/index.html

 

i'm in....i'll look for a manufacturer..ok...cool
peace

------------------
"Work like you don't need the money, love like you've never been hurt, and dance like you do when nobody's watching."

 

I would be in for the liscense plate and the banner for the windshield, i think that would look cool and hell.

------------------
87Camaro RS
305 carb.
K&N air filter
HyperTech Stage II chip
160 Thermostat
Autolite wires and NGK plugs

 

not gonna let die....


hmm... Pewter/silver Keychains....

------------------
91 FireBird 305 V-8
Edelbrock Catback, Fourth Gen Console. i have six cupholders. all for starbucks!
ghetto rigged cold air intake,
GheTTo Riggers INC.
We Make Mcgyver look Like Crap
God Created The Earth, And Then Turned Up The Bass
F-Body Meeting, Naperville IL, Chicago Ave and Washington. July 27, 8:00ish.

Part Search, I NEED A Harness For A Radiator fan, THANX

 

ok heres my reply ill buy it all and like others no sticker on my ride. it would go on the tool box. as for the beer, well i hate beer but ice tea or crown and sprite would be good.


------------------
92 z28 170,000 miles 14.20 on goodyear eagles before exhaust only mods k&n and slp 13/4 headers and dual 2 1/2 exhaust
87 trans am 12.20 on motor too many mods to list

 

I CAN MAKE THE STICKERS!!!!!

my sister just bought a decal cutter, were already talking about small stickers that say thirdgen.org with a pontiac and chevy symbol on it (like the one on the first page of this site). She can make them in just about any size you want, and in any color, as long as it's white, red silver or black. prices are $2 plus shipping for a small one, and $10 plus shipping for a window banner. i already made a banner for myself, there is some crappy pics of it HERE

As long as we can get enough DEFINATE interest on it, and the Admins. dont have a problem with it, we are gonna do it.

Anyone who DEFINATELY wants one, email me, and if we get enough (like 10-15 people) i'll email the admins, and see if we can get this rolling.

Eric

------------------
My 1986 Z28
GM350, T-5, 3.23's, lots of go fast goodies, 4th gen Firebird interior etc...
85 IROC w/ 1364 miles!

You'll always find what you've lost in the last place you look

R.I.P Dale Earnhardt