Rims from an Impala SS
Thread Starter
Junior Member
Joined: Apr 2001
Posts: 83
Likes: 0
From: Blacklick, Ohio, USA
Car: '91 RS
Engine: 5.7 tbi
Transmission: 700r4
Rims from an Impala SS
Would rims from a 94 to 96 LT1 Impala SS fit a third gen? They are 17x8.5 with a 6.00 mm offset and 5" bolt center. Would I need spacers or a different size front and rear?
Thanks in advance,
GC
:lala: What the hell is this?
Thanks in advance,
GC
:lala: What the hell is this?
Supreme Member
Joined: Aug 1999
Posts: 3,534
Likes: 0
From: Mililani, HI USofA Search Posts: 2848.............. Whore Posts: 47.................. Magical Whore Posts: 1
Car: 91 Camaro 77K
Engine: 3.1 Vslick
Re: Rims from an Impala SS
Originally posted by gcore45
:lala: What the hell is this?
:lala: What the hell is this?
Supreme Member
iTrader: (1)
Joined: Aug 1999
Posts: 2,842
Likes: 6
From: Rowlett, TX
Car: 1988 GTA
Engine: 5.0 TPI
Transmission: T5
Axle/Gears: 9 Bolt, 3.45
Impala wheels will not fit a thirdgen because of the 5 on 5" bolt pattern. Third (and fourth) gens are 5 on 4.75"
Trending Topics
Junior Member
Joined: Nov 2012
Posts: 9
Likes: 0
Car: 91 rs camaro
Engine: l31 swap
Transmission: 700r4
Axle/Gears: 2.7
Re: Rims from an Impala SS
Ok I have these rims on my camaro and let me tell you there awesome. I found out you can get them to fit by buying brake rotors from a 2000 astro van. Turns out they fit the spindle perfect. As long as you have the standard spindles. Also I have a 91 camaro so I got lucky with the rear axles from a astro van since I have a 28 spline rear end. I tried spacers very bad idea the front will rub and the rears stick out alot and hit the well (on every bump).
COTM Editor (Retired)
Joined: Aug 2009
Posts: 1,884
Likes: 83
From: Washington
Car: 89 Formula 350, TTA
Re: Rims from an Impala SS
Ok I have these rims on my camaro and let me tell you there awesome. I found out you can get them to fit by buying brake rotors from a 2000 astro van. Turns out they fit the spindle perfect. As long as you have the standard spindles. Also I have a 91 camaro so I got lucky with the rear axles from a astro van since I have a 28 spline rear end. I tried spacers very bad idea the front will rub and the rears stick out alot and hit the well (on every bump).
Junior Member
Joined: Nov 2012
Posts: 9
Likes: 0
Car: 91 rs camaro
Engine: l31 swap
Transmission: 700r4
Axle/Gears: 2.7
Re: Rims from an Impala SS
Last edited by GaSS burner; Feb 9, 2014 at 11:19 AM. Reason: inserting picture
Thread
Thread Starter
Forum
Replies
Last Post
LiquidBlue
Wheels and Tires
32
Dec 10, 2019 04:06 PM
