Replace door or door skin
06-26-2002, 09:10 PM
#1
Junior Member
Thread Starter
Join Date: Jun 2002
Location: Southern California
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Replace door or door skin
Let me start by admitting my cluelessness in body repair.
I want to restore this car to like new condition.
I have a 1990 RS that has a horribly mangled passenger door. Sideswiped a telephone pole. I have a 1984 Berlinetta that I've been using for parts and the door is an exact fit. The RS has power windows and door locks though and the 1984 is manual. Can I convert the old 1884 door to the 1990 power version? I took off the interior door panel from the 1984 door and there are these wierd fasteners that I can't remove unless I drill them out. That includes the fasteners holding the window in too.
What is a door skin? Can I use the outside skin off the 1984 door or is it something I need to take in to have installed at a body shop? I'm trying to save money and I hate to pay the rates charged in the shops. Most of the work I see is not first rate at the cheaper places either.
The car runs really strong and has the 305/TBI, flowmaster, hyperchip, K&N and 1989 IROC stabilizer bars front and rear.
I want to restore this car to like new condition.
I have a 1990 RS that has a horribly mangled passenger door. Sideswiped a telephone pole. I have a 1984 Berlinetta that I've been using for parts and the door is an exact fit. The RS has power windows and door locks though and the 1984 is manual. Can I convert the old 1884 door to the 1990 power version? I took off the interior door panel from the 1984 door and there are these wierd fasteners that I can't remove unless I drill them out. That includes the fasteners holding the window in too.
What is a door skin? Can I use the outside skin off the 1984 door or is it something I need to take in to have installed at a body shop? I'm trying to save money and I hate to pay the rates charged in the shops. Most of the work I see is not first rate at the cheaper places either.
The car runs really strong and has the 305/TBI, flowmaster, hyperchip, K&N and 1989 IROC stabilizer bars front and rear.
06-26-2002, 09:32 PM
#2
Senior Member
Join Date: Feb 2002
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
follow the link in my signature for information on the window issue.
on topic of power locks, see:
http://www.geocities.com/modularmoto...gen/powerlocks
on topic of power locks, see:
http://www.geocities.com/modularmoto...gen/powerlocks
Thread
Thread Starter
Forum
Replies
Last Post
