Does anyone have pics of a 4th gen interior into a 3rd gen?

I'm mainly concerned about the dash/door pannels/console. I would have used the search feature because I know I've seen pics up here before in the past, but the search has been disabled.

 

Not a thirdgen, but if you work hard enough, you can put one in near anything. Here's a '97 dash and workinggauges in a Fiero:

 

My car:
http://members.cardomain.com/nicksilver

those are soem older pics...leme dig up the newest ones.

 

Hey CustomX i really like your car. Since i have a black iroc i think the black color is the best.

 

this guy did it: http://www.fortunecity.com/silverstone/clutch/63/

 

 

hey Fatal how do you get the flames on the door panels like that?

 

Fatal, I've been playing with my wiring with my change over and am stumped at this point. I got an 86 firebird I installed/am installing a 99 firebird interior. wired up the power windows, could'nt get them to work, spend all weekend burning fingers and scratching my head, finally concluded a bad switch on drivers side. Okay, bought a new one- now I can run both windows from the drivers seat. Problem: Pass. side does'nt work with the pass. side window switch. The cars original wiring scheme was just reversing the polarity for the up/down action. The 99 window switch has no ground, the power is pushing through the switch and into the motor. I can't figure it out and it's driving me crazy-gotta be something stupid I'm just overlooking and making it more difficult than it is. Please get back to me

 

gotta remember... I'm not mixing old wiring with new. It's all 4th gen wiring. You need wiring schematics to figure all that out.

The flames in the door panels is mdf wood that i cut and sanded to the flame shape, then just cover.

 

Mines just a track car that I want to be alittle different, so I don't want to get too carried away as far as switching harnesses, as the only wirting the car currently has is just the neccesities. Appreciate ya getting back though.