Looking for help :)
Thread Starter
Junior Member
Joined: Jul 2004
Posts: 91
Likes: 0
From: Canada
Car: 87 Iroc Z28
Engine: 305
Transmission: 5 speed
Looking for help :)
I'm back on TGO boards... Its been a rough time on me and my car since my last posts...
Lost my job and have been having a hard time even feeding myself.... but I did just get a job recently and now its time to start loving my car again like I used to.... With no money.... I just hated to see the car go down hill..... poor thing.... I know ppl here keep parts cars... so this message is for you guys..
I am wondering if any of you parts car guys could help me out with some parts
I will pay of course I am not asking for freebies.... Below are a list of items that I would like to have or need.
Needs:
Front Bumper with Headlight bracket. the bracket is 1 part for both sides.
Wants:
These items are not necessary but would like to get some feedback as whether ppl have them or not. and what prices they would require for them.
91-92 Deck spoiler I believe those are the years.....
Passenger side Door skin outer shell of the door, Cars been broken into and the front part of the outer shell has cracked and now flops when you close the door (Grumble)
Door Rubbers and moulding for both sides of car.
Dashpad Black
oooo and b4 I forget... if anyone has those dang ol' plastic screws and such for the back plastic body parts.. I could use about 1/2 dozzen of them including the plastic back parts they screw into need Black screws pls
My passenger side door is not set right either.. there is gap at the front of the door from the frong quarter panel, its both back from the front and inset. 1 person told me it could be the hinges are bent..... is this possible? Fixable? or should ... since the whole door has probs... should I just get a whole new door.......... ???
If you have any of the folowing items pls let me know what you would charge for these parts....
Lost my job and have been having a hard time even feeding myself.... but I did just get a job recently and now its time to start loving my car again like I used to.... With no money.... I just hated to see the car go down hill..... poor thing.... I know ppl here keep parts cars... so this message is for you guys..

I am wondering if any of you parts car guys could help me out with some parts
I will pay of course I am not asking for freebies.... Below are a list of items that I would like to have or need.Needs:
Front Bumper with Headlight bracket. the bracket is 1 part for both sides.
Wants:
These items are not necessary but would like to get some feedback as whether ppl have them or not. and what prices they would require for them.

91-92 Deck spoiler I believe those are the years.....
Passenger side Door skin outer shell of the door, Cars been broken into and the front part of the outer shell has cracked and now flops when you close the door (Grumble)
Door Rubbers and moulding for both sides of car.
Dashpad Black
oooo and b4 I forget... if anyone has those dang ol' plastic screws and such for the back plastic body parts.. I could use about 1/2 dozzen of them including the plastic back parts they screw into need Black screws pls
My passenger side door is not set right either.. there is gap at the front of the door from the frong quarter panel, its both back from the front and inset. 1 person told me it could be the hinges are bent..... is this possible? Fixable? or should ... since the whole door has probs... should I just get a whole new door.......... ???
If you have any of the folowing items pls let me know what you would charge for these parts....
If only you posted this about a month earlier. I had a mint dash pad i just sold for i think $30. Also, check ebay, they might have some good parts. But also i might have those plastic screws. Do you mean the ones that hold the plastic trim in the inside or for the bumper and taillights?
Senior Member
Joined: Sep 2004
Posts: 514
Likes: 0
From: Acushnet,Ma
Car: 92 Camaro (R)eally(S)tock
Engine: 305 TBI
Transmission: Auto 700r4
Someone might get mad that this isnt in the parts wanted board but whatever I have a mint dashpad and the screws. PM me if your interested



