How to repair front chin spoiler???
#1
Member
Thread Starter
Join Date: Sep 2003
Location: La Crescenta,CA
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro
How to repair front chin spoiler???
Im not sure where to post this so I hope this is the right forum.Anyways,I got into a little accident with the camaro and need to repair the front chin spoiler.Paint is chipping and some of the material was taken off after the accident.My question to everyone is what to use to repair it?Does everyone use bondo or should I use something else?I did a search but only came up with repair on cracks on the sides no actual chipping in the bumper/spoiler.Here is a pic of what has to be repaired
Last edited by 91NiteRida'; 09-07-2005 at 11:39 AM.
#2
TGO Supporter
iTrader: (2)
2 part urethane epoxy. Eastwood sells it, and any parts store should sell it. It's not the cheapest stuff in the world, but it works exceptionally well. The only complaint I have about it is that because it's consistancy is a little different than the urethane, it's hard to sand a feather edge into it. I wound up using a skim coat of bondo to smooth it when I filled the license plate holes in the bumper of my GTA, but the amount of bondo was minimal, and 3 years later it still looks perfect.
#3
Senior Member
Join Date: Nov 2003
Location: Waterloo, Iowa
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS 25th Aniversarry Edition
Engine: 305
Transmission: TH-700-R4
Axle/Gears: 10 bolt with 3.23's and SLP Posi.
id start by sanding the damaged area to see how bad the damage really is.
#4
Supreme Member
Join Date: Feb 2005
Location: Torrance, CA
Posts: 1,286
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1991 Camaro RS
Engine: THE LT1 SWAP SHALL BEGIN!!!!
Transmission: 700 R4
Axle/Gears: LSD! =(
I'd start by Changing the License Plate ID to something cooler than PANG and have AMERICAN PRIDE since Camaro is an American Vehicle
#5
Member
Thread Starter
Join Date: Sep 2003
Location: La Crescenta,CA
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro
Originally posted by Psycho_91Camaro
I'd start by Changing the License Plate ID to something cooler than PANG and have AMERICAN PRIDE since Camaro is an American Vehicle
I'd start by Changing the License Plate ID to something cooler than PANG and have AMERICAN PRIDE since Camaro is an American Vehicle
#6
Supreme Member
iTrader: (17)
Join Date: Feb 2003
Location: Buckley AFB, CO / Crestview, FL
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
Car: 83 Z-28
Engine: LG4
Transmission: 700R4
Axle/Gears: 02 WS6 Rear w/3:42
Originally posted by Psycho_91Camaro
I'd start by Changing the License Plate ID to something cooler than PANG and have AMERICAN PRIDE since Camaro is an American Vehicle
I'd start by Changing the License Plate ID to something cooler than PANG and have AMERICAN PRIDE since Camaro is an American Vehicle
#7
Member
Join Date: Jul 2005
Location: St. Louis
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro Sport Coupe LT
Engine: 5.0 305 Code H
Transmission: 700R4
Just let somebody you don't know back into your front end and be like WTF man!!! lol.
OOOOO and don't forget to turn off the turn signal lol j/k.
OOOOO and don't forget to turn off the turn signal lol j/k.
Thread
Thread Starter
Forum
Replies
Last Post
AkDrifted
Engine/Drivetrain/Suspension Parts for Sale
6
08-17-2015 07:45 PM