I was wondering if the Z-28 GFX from the 82-84 camaro fit onto a Sport Coupe 84 camaro. If it does, what pieces do i need. I just want to know if it will fit on the same nose or if I have to get the Z-28 front nose. Thanks.

 

I am pretty sure that you will just need the GFX peices and the hardware. you will need to drill the holes for them though

 

i believe you have to get the front nose unless you wanna make some kinda bracket. if i remember correctly when i chenged the front end on my car the nose has a little lip with some tabs or soemthing on it.

actually heres a pic of the one i put on if you can see the lower part of the bumper it has a little lip and tabs for the GFX to bolt onto.

 

yeah but that nose pictured about isint from a 82-84
----------
btw you can make the 82-84 z28 skirt fit on your sc nose. It just looks odd. You need a rear bumper , the 1/4 panel skirts , the door skirts , rocker skirts and thats all. Along with the mounting hardware.

 

To Do the Z-28 GFX conversion you will need the following:
Front Bumper
Rear Bumper
Side Skirt GFX
Door GFX
Quarter Panel GFX
And the metal mounting brackets for the side skirts

You will have to use the Z-28 front bumper, and you will have to drill for the door and Quarter Panel GFX. That should be everyting you need, you may also need the front and rear bumper re-enforcements. (They are these eggcrate looking things, that are behind the bumper). But I think the stock ones will work fine.

P.S. I have an almost complete set of GFX from a '83 Z-28. The only parts I dont have is the Door GFX and the metal mounting brackets. If your looking to buy some peices feel free to contact me.
Han