Hatch compatability, easy question
Thread Starter
Junior Member
Joined: Jun 2004
Posts: 23
Likes: 0
From: North Carolina
Car: 1989 Pontiac Formula 350
Engine: L98
Transmission: 700r4
Hatch compatability, easy question
I need to replace the hatch assembly on my 89 Formula. I know any hatch from third gen Firebirds will fit, would I be correct in assuming that third gen Camaro hatches would fit as well?
Joined: Jul 1999
Posts: 10,950
Likes: 26
From: Orange, SoCal
Car: 1990 Pontiac Trans Am
Engine: 355 TPI siamesed runners
Transmission: Tremec T56
Axle/Gears: 12-Bolt 3.73
Re: Hatch compatability, easy question
Yes, I'm pretty sure they're both the same.
Lon at Top-Down Solutions would know for sure.
Lon at Top-Down Solutions would know for sure.
Joined: Sep 2005
Posts: 27,893
Likes: 2,436
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Hatch compatability, easy question
Only difference may be in spoiler bolt hole locations and such as that...
Re: Hatch compatability, easy question
All thirdgen hatches are the same, and as far as the bolt holes on the decklid, they are different depending on spoiler etc.... but the decklids can be swapped from window to window.
But, if you are planning on using the stock Formula spoiler, you will need a back window from any 85-90 Trans Am, Formula or GTA, as the clips for the aero spoiler are welded onto the window frame.
But, if you are planning on using the stock Formula spoiler, you will need a back window from any 85-90 Trans Am, Formula or GTA, as the clips for the aero spoiler are welded onto the window frame.
Thread
Thread Starter
Forum
Replies
Last Post