Hey Guys, 1st post, but wanted to thank everyone for all the valuable information I've been getting on here since buying 2 3rd gen camaros in last few months.
The problem: I bought a set of T-Top seals (top to window seal) and when it arrived and I was installing, I noticed that it was not only 2" longer than my factory seals(not C&C t-roof) but the screw hole attachments were 3" different than mine. The screw attachments were so far off that they wouldn't have been able to fit on my t-top hardware.
The company I bought them from eBay originally thought it was an issue with my T-Tops, but I compared on two cars(87 and 85) with T-Tops that measured 30 1/4" at the t-bar center and neither matched up to the moldings I received. (edit: the company told me today there was a mistake with wrong seals sent)
I would appreciate if someone could measure their t-top seals(outer seal that window closes against) and let me know. Mine are approx. 24" long at furthest end.


Appreciate any help!

I just heard back from the company and the seals were the wrong size, but before they send me replacements, I would appreciate if someone could let me know how long their T-Top seals are and the distance between the screws attaching to T-tops.
I'm in Canada and it's a real hassle to send stuff back if they're the wrong size.
Thanks
*****

My weatherstripping is approx. 25" long and the distance between the centerlines of the the two plastic mounting pieces is approx. 19.5 ". Hope this helps.