Craig-'84-Z28

I am beginning to order parts for an '84 Z28 that I just recently bought. I need to replace the broken old moldings. I found a place to buy replacements but they are advertised as being for an '85. I don't think there should be any problem getting these to fit but, if someone else knows of any problems doing this, please let me know.

Thank You.

------------------
Bored, Stroked, Blown, Injected and Juiced... (We all gotta dream a little!)

deadbird

from looking at part #'s ,,,the molding is the same on camaros from 82-87. I wouldn't think you'd have any problems. But,,they aren't from the factory either so,,you never know. Most of all moulding (the solid urethane style)I've seen is just applied with double sided tape. there was also a style the had an aluminum track riveted on with a push in rubber moulding (similar to 2nd gens mouldings). Most of the time you can get the thru a local paint supply house for pretty cheap by the foot. Neither is very hard to apply tho. Hope that's some help

------------------
<A HREF="http://anzwers.org/free/gta" TARGET=_blank>87 Firebird
84 Camaro</A>
Virtual Racing

- intelligence is learned, ignorance is universal