Underbody Measurements for a Third Gen
#1
Senior Member
Thread Starter
Join Date: Jun 2011
Location: Melbourne, Australia
Posts: 839
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 IROC Camaro (RHD)
Engine: 350 ci L98 SBC
Transmission: T700
Axle/Gears: 9 bolt BW, Disk, Posi-traction
Underbody Measurements for a Third Gen
I've seen a few people here ask about underbody measurements and how to check of the K-Member etc are square, so I took some prints from the Camaro Factory Service Manual and have posted them here.
I've also included a diagram from someone else here which illustrates where the main measurements are taken from.
Key words to help searching for these diagrams would be:
Third gen Camaro
Underbody measurements
Underbody horizontal and vertical dimensions
Tram gauge
Tram gage
Bent frame
Unibody
align chassis jig
accident damage
floor pan
K-member
K member
cross member
straight
I've also included a diagram from someone else here which illustrates where the main measurements are taken from.
Key words to help searching for these diagrams would be:
Third gen Camaro
Underbody measurements
Underbody horizontal and vertical dimensions
Tram gauge
Tram gage
Bent frame
Unibody
align chassis jig
accident damage
floor pan
K-member
K member
cross member
straight
Thread
Thread Starter
Forum
Replies
Last Post
New2Chevy
Engine/Drivetrain/Suspension Parts for Sale
2
09-28-2015 12:35 AM